Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

OPA140AID

Manufacturer

Texas Instruments
Manufacturer's Part Number

OPA140AID
Description

OPERATIONAL AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Datasheet

Datasheet

Not In Stock

Popular Products

LM358AN

Fairchild Semiconductor

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

SMBJ18CA

Daco Semiconductor

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

M39029/58-360

Defense Logistics Agency

CONNECTOR ACCESSORY; Contact Type: CRIMP REAR RELEASE; Mating Contacts: M39029/56-348, M39029/57-354; Insertion Tool Sources: MILITARY; Contact Gender: MALE; Alternate Contact Sources: MILITARY;

Details

BAV99

Sensitron Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

RC0402FR-0710KL

Yageo

Yageo's RC0402FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance, suitable for applications requiring a rated power dissipation of 0.0625 W. With a temperature coefficient of 100 ppm/°C, it operates b/w -55 to 155 °C, making it ideal for various electronic circuits.

Details

1N4148W-7-F

Multicomp Pro

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LL4148

Daco Semiconductor

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

2N7002

Motorola

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified; Minimum Operating Temperature: -55 Cel;

Details

1N4148WT

Tak Cheong Electronics Holdings

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148

Itt Components

RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .15 A;

Details

SS14

Meritek Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

NE555D

Texas Instruments

NE555D by Texas Instruments is an 8-terminal IC with a supply voltage range of 4.5V to 16V, suitable for analog waveform generation applications. It operates at temperatures from 0°C to 70°C and has a max supply current of 15mA. The package style is small outline, making it ideal for compact electronic designs.

Details

LL4148

Itt Components

RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .005 us; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Non Repetitive Peak Forward Current: 1 A;

Details

STM8S003F3P6TR

STMicroelectronics

STM8S003F3P6TR by STMicroelectronics is an 8-bit microcontroller with a max clock frequency of 16 MHz. It features 1024 RAM bytes, 128 data EEPROM size, and 5-ch 10-bit ADC channels. Ideal for industrial applications requiring low power mode and connectivity via I2C, SPI, and UART interfaces.

Details

MMBT3904-7-F

Diodes Incorporated

Diodes Inc. MMBT3904-7-F is a NPN BJT transistor for switching applications. Features include VCEsat of 0.3V, hFE of 30, and IC of 0.2A. With a max operating temp of 150°C, it's ideal for small outline SMT designs in automotive electronics.

Details

1N4148

Rfe International

RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Forward Voltage (VF): 1 V; Config: SINGLE;

Details

1N4148WS

Changzhou Galaxy Century Microelectronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LL4148

Excel (Suzhou) Semiconductor

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

2N2222A

Boca Semiconductor

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

DS18B20U

Dallas Semiconductor

TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -55 Cel; Package Equivalence Code: TSSOP8,.19;

Details

OPA140AID Technical Details

TYPE	DESCRIPTION
Package Body Material:	Plastic/Epoxy
Low-Bias:	Yes
Sub-Category:	Operational Amplifiers
Surface Mount:	Yes
Maximum Input Offset Voltage:	120 uV
Minimum Voltage Gain:	501187.2336
Package Shape:	Rectangular
Terminal Form:	Gull Wing
Package Code:	SOP
Amplifier Type:	Operational Amplifier
Nominal Slow Rate:	20 V/us
Moisture Sensitivity Level (MSL):	2
Architecture:	Voltage Feedback
Packing Method:	Tube
Programmable Power:	No
Nominal Negative Supply Voltage (Vsup):	-18 V
Qualification:	No
Package Equivalence Code:	SOP8,.25
Peak Reflow Temperature (C):	260 °C (500 °F)
Terminal Pitch:	0.05 in (1.27 mm)
Maximum Seated Height:	0.069 in (1.75 mm)
Frequency Compensation:	Yes
Maximum Supply Voltage Limit:	20 V
Maximum Bias Current (IIB) @25C:	10 pA
Maximum Supply Current:	2.7 mA
Terminal Finish:	Nickel/Palladium/Gold
No. of Terminals:	8
Nominal Unity Gain Bandwidth:	11 MHz
Terminal Position:	Dual
Package Style (Meter):	Small Outline
JESD-30 Code:	R-PDSO-G8
Low-Offset:	Yes
Maximum Operating Temperature:	125 °C (257 °F)
Width:	0.154 in (3.9 mm)
Nominal Common Mode Reject Ratio:	140 dB
Micropower:	No
JESD-609 Code:	e4
Minimum Operating Temperature:	-40 °C (-40 °F)
Maximum Average Bias Current (IIB):	10 pA
No. of Functions:	1
Minimum Common Mode Reject Ratio:	126 dB
Length:	0.193 in (4.9 mm)
Nominal Supply Voltage / Vsup (V):	18 V
Maximum Negative Supply Voltage Limit:	-20 V
Maximum Input Offset Current (IIO):	1 nA
Power:	No
Temperature Grade:	Automotive
Wideband:	No
Power Supplies (V):	±2.25/±18/4.5/36 V

Category Top Products

OPA2277UAE4

Texas Instruments

OPA2277UAE4 by Texas Instruments is a micropower operational amplifier with low-offset and high common mode rejection ratio. It operates at a supply voltage of +-2/+-18V, has a unity gain bandwidth of 1MHz, and features a small outline package suitable for industrial applications.

TL072CDR

Texas Instruments

TL072CDR by Texas Instruments is a dual operational amplifier with low-bias and frequency compensation. It offers a nominal unity gain bandwidth of 3000 kHz, min slew rate of 8 V/us, and max input offset voltage of 13000 uV. Ideal for commercial applications requiring high voltage gains and precise signal processing in compact designs.

OPA227UA/2K5

Burr-Brown Corporation

OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

LM358DR

STMicroelectronics

LM358DR by STMicroelectronics is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal common mode reject ratio of 85 dB and a nominal unity gain bandwidth of 1100 kHz. This amplifier is commonly used in applications requiring precise signal amplification and filtering.

OPA333AIDBVR

Texas Instruments

OPA333AIDBVR by Texas Instruments is a low-offset operational amplifier with a max input offset voltage of 10uV. It has a nominal common mode reject ratio of 130dB and operates at a max supply voltage of 7V. This op amp is commonly used in automotive applications due to its low-bias and micropower features.

LM2902N

Philips Semiconductors

OPERATIONAL AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: THROUGH-HOLE; No. of Terminals: 14; Package Code: DIP; Package Shape: RECTANGULAR;

LM2902M

Texas Instruments

LM2902M by Texas Instruments is a quad operational amplifier with 4 functions. It features a max input offset voltage of 10000 uV and micropower technology. Ideal for industrial applications requiring high common mode rejection ratio and low bias current.

OPA548T-1G3

Texas Instruments

OPA548T-1G3 by Texas Instruments is an Operational Amplifier with a max input offset voltage of 10000 uV, 95 dB common mode reject ratio, and 30 V supply voltage. It is used in industrial applications requiring high precision amplification with a wide temperature range.

OPA277UA

Texas Instruments

OPA277UA by Texas Instruments is an operational amplifier with low-offset and micropower features. It offers a max input offset voltage of 100uV, nominal voltage of +/-15V, and a min slew rate of 0.8V/us. Ideal for industrial applications requiring precise signal amplification in compact designs.

OPA2314ASDRBTEP

Texas Instruments

OPA2314ASDRBTEP by Texas Instruments is a CMOS operational amplifier with low bias current (0.00001 uA) and micropower feature. With a unity gain bandwidth of 3000 kHz, it's ideal for automotive applications requiring high common mode rejection ratio (80 dB). The small outline package makes it suitable for space-constrained designs.

OPA2241UA

Texas Instruments

OPA2241UA by Texas Instruments is a dual operational amplifier with low-offset and micropower features. It offers a max input offset voltage of 250uV, nominal unity gain bandwidth of 35kHz, and a max supply current of 0.076mA. Ideal for industrial applications requiring precise signal amplification in compact designs.

INA132U/2K5

Texas Instruments

Texas Instruments' INA132U/2K5 is an operational amplifier with 250uV max input offset voltage and 90dB nominal CMRR. Ideal for applications requiring a small outline package, it operates b/w -40 to 85°C with a supply voltage of ±15V. The op amp features low-offset, VFB architecture, and consumes only 0.185mA max supply current.

OPA2209AIDGKR

Texas Instruments

OPA2209AIDGKR by Texas Instruments is a dual operational amplifier with low offset voltage of 150uV and bias current of 0.015uA. Ideal for automotive applications, it offers high common mode rejection ratio of 130dB and unity gain bandwidth of 18MHz in a small outline package.

MC34072DR2G

Onsemi

MC34072DR2G by Onsemi is a dual operational amplifier with a max input offset voltage of 7000 uV and a nominal common mode reject ratio of 97 dB. It is commonly used in applications requiring high voltage gain and low bias current, such as audio amplifiers and signal conditioning circuits.

LM324N

Rca Solid State

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 14; Package Code: DIP; Package Shape: RECTANGULAR;

LM7321MFX

Texas Instruments

LM7321MFX by Texas Instruments is an Operational Amplifier with 6000uV Max Input Offset Voltage, 80dB CMRR, and 16000kHz Unity Gain Bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and small outline package style.

INA138NA/3K

Burr-Brown Corporation

OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 5; Package Shape: RECTANGULAR; JESD-609 Code: e0;

LM7322MA/NOPB

Texas Instruments

LM7322MA/NOPB by Texas Instruments is a dual operational amplifier with 6000uV max input offset voltage and 1.5uA max average bias current. Ideal for automotive applications, it operates at -40 to 125 °C with a supply voltage of +-1.25/+-16/2.5/32 V and offers a unity gain bandwidth of 16000 kHz.

OPA2227UA/2K5

Texas Instruments

OPA2227UA/2K5 by Texas Instruments is a dual operational amplifier with low-offset and high common mode rejection ratio. It operates at industrial temperature range, with voltage feedback architecture and 8000 kHz unity gain bandwidth. Ideal for precision applications requiring low bias current and offset voltage.

LM324M

Texas Instruments

LM324M by Texas Instruments is a quad operational amplifier with 14 terminals. It features a max input offset voltage of 9000 uV, bias current of 0.5 uA, and common mode reject ratio of 85 dB. Widely used in applications requiring low power consumption and high gain bandwidth such as sensor interfaces and signal conditioning circuits.