Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

OPA2320AIDGKT

Manufacturer

Texas Instruments
Manufacturer's Part Number

OPA2320AIDGKT
Description

OPERATIONAL AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: TSSOP; Package Shape: SQUARE;
Datasheet

Datasheet

Not In Stock

Popular Products

M39029/58-360

Conesys

CONNECTOR ACCESSORY; MIL Conformity: YES; Mating Contacts: M39029/57-354; Terminal Type: CRIMP; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT;

Details

M39029/58360

Esterline Technologies

CONNECTOR ACCESSORY; Terminal Type: CRIMP; Removal Tools: M81969/14-01; Associated Military - Specifications: MIL-DTL-38999; IEC Conformity: NO; MIL-Connector Accessory Name: CONTACT;

Details

2N7002

Diodes Incorporated

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Form: GULL WING; JESD-30 Code: R-PDSO-G3;

Details

2N2222A

Philips Semiconductors

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

1N4148

General Diode

RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Terminal Finish: Tin/Lead (Sn/Pb); No. of Elements: 1;

Details

SMBJ18CA

Protek Devices

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM107H/883

National Semiconductor

OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;

Details

FDN5618P

Onsemi

FDN5618P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage. It features a single configuration with built-in diode, suitable for switching applications. With 10A IDM and 0.17 ohm RDS(on), it operates in the temperature range of -55 to 150 °C, making it ideal for various electronic devices.

Details

LL4148

Sinyork

RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V;

Details

1N4148

Rochester Electronics

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

SMBJ18CA

Good-ark Electronics

TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;

Details

LM317T

Analog Devices

ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; No. of Functions: 1; Package Body Material: PLASTIC/EPOXY; Surface Mount: NO;

Details

LM2931Z-5.0RPG

Onsemi

LM2931Z-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V Nominal Output Voltage, 0.1A Max Output Current, and 6V Min Input Voltage. It operates in temperatures ranging from -40 to 125 °C and is ideal for applications requiring stable voltage regulation in electronic circuits.

Details

2N7002

Bytesonic Electronics

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Position: DUAL; Minimum Operating Temperature: -55 Cel;

Details

SS14

Hitano Enterprise

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LL4148

International Semiconductor

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

BSS138BKW,115

NXP Semiconductors

NXP Semiconductors' BSS138BKW,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A ID. Ideal for SWITCHING applications, it features a built-in diode, 1.6 ohm RDS(on), and operates in ENHANCEMENT MODE. Suitable for surface mount with GULL WING terminals, it meets AEC-Q101 standards.

Details

MMBT2907ALT1G

Onsemi

MMBT2907ALT1G by Onsemi is a PNP BJT transistor with 100 min hFE, 60V VCEO, and 200MHz fT. Ideal for switching applications, it has a small outline package with Gull Wing terminals and can handle up to 0.6A of collector current.

Details

BAV99

SPC TECHNOLOGY/ MULTICOMP

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148WS

Sinyork

RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; No. of Elements: 1; Maximum Output Current: .2 A; Config: SINGLE;

Details

OPA2320AIDGKT Technical Details

TYPE	DESCRIPTION
Package Body Material:	Plastic/Epoxy
Low-Bias:	Yes
Maximum Seated Height:	0.043 in (1.1 mm)
Frequency Compensation:	Yes
Maximum Supply Voltage Limit:	6 V
Maximum Bias Current (IIB) @25C:	0.9 pA
Sub-Category:	Operational Amplifiers
Maximum Supply Current:	3.5 mA
Surface Mount:	Yes
Terminal Finish:	Nickel/Palladium/Gold/Silver
No. of Terminals:	8
Maximum Input Offset Voltage:	150 uV
Nominal Unity Gain Bandwidth:	20 MHz
Terminal Position:	Dual
Package Style (Meter):	Small Outline, Thin Profile, Shrink Pitch
Technology:	CMOS
JESD-30 Code:	S-PDSO-G8
Low-Offset:	Yes
Minimum Voltage Gain:	63100
Package Shape:	Square
Terminal Form:	Gull Wing
Maximum Operating Temperature:	125 °C (257 °F)
Package Code:	TSSOP
Amplifier Type:	Operational Amplifier
Nominal Slow Rate:	10 V/us
Width:	0.118 in (3 mm)
Moisture Sensitivity Level (MSL):	2
Architecture:	Voltage Feedback
Nominal Common Mode Reject Ratio:	96 dB
Packing Method:	Tape And Reel
Programmable Power:	No
Micropower:	No
JESD-609 Code:	e4
Minimum Operating Temperature:	-40 °C (-40 °F)
Maximum Average Bias Current (IIB):	0.9 pA
No. of Functions:	2
Qualification:	No
Minimum Common Mode Reject Ratio:	100 dB
Package Equivalence Code:	TSSOP8,.19
Length:	0.118 in (3 mm)
Nominal Supply Voltage / Vsup (V):	5 V
Peak Reflow Temperature (C):	260 °C (500 °F)
Terminal Pitch:	0.026 in (0.65 mm)
Maximum Input Offset Current (IIO):	0.9 pA
Power:	No
Temperature Grade:	Automotive
Wideband:	No
Power Supplies (V):	±0.9/±2.75/1.8/5.5 V

Category Top Products

LM324N/NOPB

Texas Instruments

LM324N/NOPB by Texas Instruments is a quad operational amplifier with 14 terminals. It features a max input offset voltage of 9000 uV, bias current of 0.5 uA, and common mode reject ratio of 85 dB. Widely used in applications requiring micropower amplification with a supply voltage range of 5-30 V.

OPA551UA/2K5

Burr-Brown Corporation

OPERATIONAL AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

INA240A2EDRQ1

Texas Instruments

Texas Instruments' INA240A2EDRQ1 is an Op Amp with 25uV Max Input Offset Voltage, 132dB CMRR, and 400kHz Unity Gain Bandwidth. Ideal for automotive applications due to AEC-Q100 screening, it operates from -40°C to 150°C with a supply voltage of 5V.

OPA2350EA/250G4

Texas Instruments

OPA2350EA/250G4 by Texas Instruments is a CMOS operational amplifier with low-offset and low-bias features. It has a max input offset voltage of 500 uV, nominal unity gain bandwidth of 38 MHz, and operates at an industrial temperature grade. Ideal for precision applications requiring high voltage feedback amplification in compact designs.

OPA197IDBVR

Texas Instruments

OPA197IDBVR by Texas Instruments is a 5-terminal operational amplifier with a max input offset voltage of 400uV and nominal voltage of 3V. With a unity gain bandwidth of 10,000 kHz, it's ideal for automotive applications requiring low bias current and high common mode rejection ratio up to 126 dB. This small outline op amp operates b/w -40°C to 125°C, making it suitable for various temperature-sensitive environments.

OPA192IDBVT

Texas Instruments

OPA192IDBVT by Texas Instruments is a low-offset operational amplifier with a max input offset voltage of 25uV and bias current of 0.00002uA. It is ideal for automotive applications, featuring a small outline package style and operating temperature range from -40 to 125 °C. With a nominal unity gain bandwidth of 10MHz, it offers high performance in compact designs.

LM324N

Raytheon Semiconductor

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 14; Package Code: DIP; Package Shape: RECTANGULAR;

INA117KU/2K5

Texas Instruments

INA117KU/2K5 by Texas Instruments is an operational amplifier with 1000uV max input offset voltage, 75dB common mode reject ratio, and 2V/us min slew rate. Ideal for industrial applications requiring precise signal amplification in a compact package.

AD822ARZ-REEL

Analog Devices

AD822ARZ-REEL by Analog Devices is a dual operational amplifier with 3000uV max input offset voltage and 80dB nominal CMRR. Ideal for industrial applications, it operates at -40 to 85 °C with low bias current of 0.000025uA. With micropower technology, it offers high gain bandwidth of 1900kHz in a small outline package.

LM358M

National Semiconductor

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

OPA244NA

Burr-Brown Corporation

OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: TSOP; Package Shape: RECTANGULAR;

OPA656NB/250G4

Texas Instruments

Texas Instruments OPA656NB/250G4 is a 5-terminal Op Amp with IIB of 0.00125 uA, Vsup of 5V, and CMRR of 84 dB. Ideal for industrial applications due to its compact size, low profile package, and wide operating temperature range from -40 to 85 °C.

OPA277UA

Burr-Brown Corporation

OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

TL072CP

STMicroelectronics

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

LM2904D

Samsung

OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

TLV272IDR

Texas Instruments

TLV272IDR by Texas Instruments is a CMOS Operational Amplifier with 7000uV Max Input Offset Voltage, 85dB Nominal CMRR, and 1.32mA Max Supply Current. Widely used in automotive applications due to its low-bias design and VOLTAGE-FEEDBACK architecture for precise signal amplification.

OPA376AIDBVT

Texas Instruments

OPA376AIDBVT by Texas Instruments is a low-offset operational amplifier with 25uV max input offset voltage and 90dB nominal CMRR. Ideal for automotive applications, it operates at -40 to 125°C, has a unity gain bandwidth of 5.5MHz, and consumes only 0.95mA max supply current.

LM2904D

Texas Instruments

LM2904D by Texas Instruments is an Operational Amplifier with 2 functions. It has a Max Input Offset Voltage of 10000 uV and Nominal Voltage of 5V. Widely used in automotive applications due to its high Common Mode Reject Ratio and low Bias Current.

OPA551FAKTWT

Texas Instruments

OPA551FAKTWT by Texas Instruments is an Operational Amplifier with a max input offset voltage of 3000uV, ideal for automotive applications. It features a nominal voltage of +-30V and a min voltage gain of 100000, making it suitable for high-performance audio systems. With low bias current and high common mode rejection ratio, this op amp is designed for precision signal processing in harsh environments.

OPA2241UAG4

Texas Instruments

OPA2241UAG4 by Texas Instruments is a micropower operational amplifier with low-offset and high common mode rejection ratio. It operates on a supply voltage of +-1.35/+-18/2.7/36 V, making it suitable for industrial applications requiring precise signal amplification in tight spaces. With a unity gain bandwidth of 35 kHz and low bias current of 0.02 uA @25C, this op amp is ideal for compact electronic devices that demand high performance in challenging environments.