Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

All prices are in USD

Bulk

QTY	Unit Price	Ext Price
4,846	Request Pricing	-

MAX3232IPWRE4

Manufacturer

Texas Instruments
Manufacturer's Part Number

MAX3232IPWRE4
Description

LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: TSSOP; Package Shape: RECTANGULAR;
Datasheet

Datasheet

4846 In Stock

Popular Products

BAV99

Zetex Plc

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BSS138

Zetex Plc

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Style (Meter): SMALL OUTLINE; Maximum Operating Temperature: 150 Cel;

Details

USB2514BI-AEZG

Microchip Technology

USB2514BI-AEZG by Microchip is a BUS CONTROLLER IC with 36 terminals, operating at 3.3V, supporting I2C, SMBUS, and USB buses. It has a clock frequency of up to 24MHz and can withstand industrial temperatures from -40°C to 85°C. This chip carrier package is surface mountable and suitable for various applications requiring USB connectivity.

Details

LL4148

General Semiconductor

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

SMBJ18CA

Telefunken Microelectronics

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BSS123LT1G

Onsemi

BSS123LT1G by Onsemi is a N-CHANNEL FET with 100V DS breakdown voltage, 0.17A drain current, and 6 ohm on resistance. Ideal for switching applications, it operates in enhancement mode with a max power dissipation of 0.225W. It comes in a small outline package with gull wing terminals and can withstand temperatures from -55 to 150°C.

Details

BAV99

Surge Components

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

NC7WZ17P6X

Fairchild Semiconductor

BUFFER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR;

Details

SS14

Frontier Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

DS18B20+

Analog Devices

DS18B20+ by Analog Devices is a 12-bit temperature sensor with 3.3/5V supply, -55 to 125°C range, and ±0.50°C accuracy. It features a 1-Wire interface for digital output and is commonly used in applications requiring precise temperature monitoring in various industries.

Details

1N4148WS

Sangdest Microelectronics (Nanjing)

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM78L05ACMX/NOPB

National Semiconductor

FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;

Details

1N4148

Eic Semiconductor

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

LL4148

Shanghai Lunsure Electronic Technology

RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; Maximum Non Repetitive Peak Forward Current: .5 A; No. of Elements: 1; Maximum Reverse Recovery Time: .004 us;

Details

MBR1560CT

General Instrument

MBR1560CT by General Instrument is a common cathode rectifier diode with a max forward voltage of 0.75V and max output current of 15A. It is used for efficiency applications, has a package shape of rectangular, and can operate in temperatures ranging from -65 to 150 °C.

Details

MC33269T-3.3G

Onsemi

MC33269T-3.3G by Onsemi is a fixed positive single output LDO regulator with a max output current of 0.8 A and a dropout voltage of 1.35 V. It is commonly used in applications that require stable voltage regulation, such as power supplies for electronic devices.

Details

BSS138

Calogic

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Drain Current (Abs) (ID): .2 A;

Details

RC0603FR-071KL

Yageo

Yageo's RC0603FR-071KL is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in electronics, it operates b/w -55 to 155 °C with a temperature coefficient of 100 ppm/°C.

Details

SMBJ18CA

Forward International Electronics

TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Nominal Breakdown Voltage: 21.05 V; Maximum Clamping Voltage: 29.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;

Details

LM358N

Texas Instruments

LM358N by Texas Instruments is an operational amplifier with 2 functions, offering a max input offset voltage of 9000 uV and a nominal common mode reject ratio of 85 dB. Widely used in commercial applications, it operates at temperatures ranging from 0 to 70 °C and has a unity gain bandwidth of 1000 kHz.

Details

MAX3232IPWRE4 Technical Details

TYPE	DESCRIPTION
Minimum Supply Voltage:	3 V
Package Body Material:	PLASTIC/EPOXY
Minimum Supply Voltage-1:	3 V
Nominal Supply Voltage:	3.3 V
Maximum Time At Peak Reflow Temperature (s):	NOT SPECIFIED
Maximum Seated Height:	1.2 mm
Minimum Out Swing:	10 V
Maximum High Level Input Current:	.000001 Amp
Sub-Category:	Line Driver or Receivers
Surface Mount:	YES
Maximum Supply Current:	1 mA
Terminal Finish:	Nickel/Palladium/Gold (Ni/Pd/Au)
No. of Terminals:	16
Terminal Position:	DUAL
Package Style (Meter):	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH
JESD-30 Code:	R-PDSO-G16
Package Shape:	RECTANGULAR
Terminal Form:	GULL WING
Maximum Operating Temperature:	85 Cel
Package Code:	TSSOP
Interface Standard:	EIA-232-F; TIA-232-F; V.28
Interface IC Type:	LINE TRANSCEIVER
Width:	4.4 mm
Nominal Supply Voltage-1:	3.3 V
Maximum Supply Voltage-1:	3.6 V
Maximum Output Low Current:	1.6 Amp
Moisture Sensitivity Level (MSL):	1
Output Polarity:	INVERTED
Input Characteristics:	SCHMITT TRIGGER
Driver No. of Bits:	2
Maximum Supply Voltage:	3.6 V
Differential Output:	NO
JESD-609 Code:	e4
Minimum Operating Temperature:	-40 Cel
No. of Functions:	2
Qualification:	Not Qualified
Maximum Transmit Delay:	300 ns
Package Equivalence Code:	TSSOP16,.25
Receiver No. of Bits:	2
Length:	5 mm
Maximum Receive Delay:	300 ns
Additional Features:	CAN ALSO OPERATE WITH 5V SUPPLY
Peak Reflow Temperature (C):	260
Terminal Pitch:	.65 mm
Temperature Grade:	INDUSTRIAL
Power Supplies (V):	3.3/5

Category Top Products

LTM2881IY-3#PBF

Analog Devices

LTM2881IY-3#PBF by Analog Devices is a line driver & receiver with a max supply voltage of 5.5V and a max transmit delay of 85ns. It is commonly used in industrial applications that require differential Schmitt trigger input characteristics and EIA-485-A/TIA-485-A/EIA-422 interface standards.

MAX3221IDBRG4

Texas Instruments

MAX3221IDBRG4 by Texas Instruments is a Line Driver & Receiver with 16 terminals, operating at 3.3/5V. It features inverted output polarity, CMOS technology, and EIA-232-F interface standard. Ideal for industrial applications requiring a max supply voltage of 5.5V and an operating temperature range from -40 to 85°C.

SP485EN-L

Maxlinear

LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

MAX3485ECSA

Maxim Integrated

MAX3485ECSA by Maxim Integrated is a Line Driver & Receiver with 3.6V max supply voltage, 35ns max transmit delay, and 2.2mA max supply current. It is used in EIA-422/EIA-485 interface applications for differential signaling over short distances.

MAX232EESE

Rochester Electronics

LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;

ST3485EIYDT

STMicroelectronics

ST3485EIYDT by STMicroelectronics is a line driver/receiver with 3-3.6V supply voltage range, 30ns max transmit delay, and -40 to 125°C operating temp. Ideal for automotive applications, it features EIA-422/EIA-485 interface standard and differential output polarity.

LTC1480IS8#PBF

Analog Devices

LTC1480IS8#PBF by Analog Devices is an 8-terminal line driver with a max supply voltage of 3.6V and operating temperature range of -40 to 85°C. It features differential outputs, EIA-422/EIA-485 interface standards, and a small outline package style. Ideal for industrial applications requiring reliable communication over long distances.

SN65HVD1780DRG4

Texas Instruments

SN65HVD1780DRG4 by Texas Instruments is an 8-terminal line driver with a max supply voltage of 5.5V and differential output. It operates in industrial temperatures, has a peak reflow temp of 260°C, and is ideal for EIA-485-A/TIA-485-A interface applications.

MAX3485ESA+

Analog Devices

MAX3485ESA+ by Analog Devices is a CMOS line transceiver with EIA-422 and EIA-485 interface standards. It operates at 3.3V, has 8 terminals, and offers differential outputs. With a max transmit delay of 35ns, it's ideal for industrial applications requiring high-speed data transmission in harsh environments.

SN65HVD78DRBT

Texas Instruments

SN65HVD78DRBT by Texas Instruments is a line driver/receiver with 3.6V max supply voltage, 15ns max transmit delay, and -40 to 125°C operating temperature range. Ideal for automotive applications, it features EIA-422/EIA-485 interface standards and differential output for robust communication in harsh environments.

MAX232EESE+

Maxim Integrated

LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;

SN65HVD73DGS

Texas Instruments

SN65HVD73DGS by Texas Instruments is a line driver/receiver with 10 terminals, operating at 3-3.6V. It features EIA-485 interface standard, differential output, and peak reflow temp of 260°C. Ideal for automotive applications due to its small outline package and wide temperature range from -40 to 125°C.

ADM485ARZ

Analog Devices

ADM485ARZ by Analog Devices is a BICMOS line transceiver with EIA-422 and EIA-485 interface standards. It operates at 5V, has a max supply voltage of 5.25V, and offers differential output. Ideal for industrial applications requiring reliable communication over long distances with low power consumption.

ISL3280EFHZ-T7A

Renesas Electronics

LINE RECEIVER; JESD-609 Code: e3; Terminal Finish: Matte Tin (Sn) - annealed;

LTC2870IUFD#PBF

Linear Technology

LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 28; Package Code: HVQCCN; Package Shape: RECTANGULAR;

LTC1480IS8#PBF

Linear Technology

LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

MAX3221EEAE+

Maxim Integrated

LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SSOP; Package Shape: RECTANGULAR;

MAX3280EAUK+T

Analog Devices

MAX3280EAUK+T by Analog Devices is a BICMOS line receiver with EIA-422 and EIA-485 interface standards. It operates b/w -40 to 125 °C, with a supply voltage range of 3-5.5 V and max current draw of 15 mA. This small outline package is ideal for automotive applications requiring differential Schmitt trigger input characteristics.

DS26C32ATMDC

Texas Instruments

DS26C32ATMDC by Texas Instruments is a CMOS line receiver with 4 functions, operating at -40 to 85°C. It supports EIA-422, EIA-423, FED STD 1020, and FED STD 1030 interface standards. Ideal for industrial applications requiring differential Schmitt trigger input characteristics and a max receive delay of 30 ns.

MAX3490EESA+

Maxim Integrated

LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;