Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

All prices are in USD

Bulk

QTY	Unit Price	Ext Price
3,240	$0.396	$1,283.526

MAX232IDWR

Manufacturer

Texas Instruments
Manufacturer's Part Number

MAX232IDWR
Description

LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
Datasheet

Datasheet

3240 In Stock

Popular Products

BAV99

STMicroelectronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SZNUP2105LT1G

Onsemi

SZNUP2105LT1G by Onsemi is a Transient Suppression Device with 2 elements in a common anode configuration. It has a max non-repetitive peak reverse power dissipation of 350W and breakdown voltage of 29.1V. Ideal for applications requiring bidirectional polarity protection, such as automotive electronics and industrial equipment due to its AEC-Q101 compliance and high clamping voltage of 44V.

Details

ULN2803A

Sanken Electric

NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; JESD-30 Code: R-PDIP-T18; Package Body Material: PLASTIC/EPOXY;

Details

KSZ9031RNXIA

Micrel

ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;

Details

1N4148

Semiconductors

RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Config: SINGLE; No. of Phases: 1; No. of Elements: 1;

Details

RC0603FR-071KL

Yageo

Yageo's RC0603FR-071KL is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in electronics, it operates b/w -55 to 155 °C with a temperature coefficient of 100 ppm/°C.

Details

SMBJ18CA

Forward International Electronics

TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Nominal Breakdown Voltage: 21.05 V; Maximum Clamping Voltage: 29.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;

Details

SN65HVD234DR

Texas Instruments

SN65HVD234DR by Texas Instruments is an 8-terminal interface circuit with a data rate of 1 Mbps. Operating temperature ranges from -40 to 125 °C, making it ideal for automotive applications. With a supply voltage of 3.3 V and low current draw of 6 mA, it's suitable for network interfaces in compact designs.

Details

1N4148WS

Yangzhou Yangjie Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SS14

Hy Electronic

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SMBJ18CA

Micro Commercial Components

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

C1210C104K5RACTU

KEMET Corporation

KEMET C1210C104K5RACTU is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics and ±10% tolerance, suitable for surface mount applications in a wide temperature range from -55°C to 125°C. Its compact rectangular package makes it ideal for various electronic devices.

Details

SS14

Hitano Enterprise

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

OHN3020U

Optek Technology

MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 25mA;

Details

LM555CM

Intersil

Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;

Details

LM2931Z-5.0RPG

Onsemi

LM2931Z-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V Nominal Output Voltage, 0.1A Max Output Current, and 6V Min Input Voltage. It operates in temperatures ranging from -40 to 125 °C and is ideal for applications requiring stable voltage regulation in electronic circuits.

Details

DS18B20

Maxim Integrated

DS18B20 by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Commonly used in applications requiring precise temperature monitoring like HVAC systems and industrial automation.

Details

1N4148

National Semiconductor

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

BAV99

Panjit International

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

ULN2803ADW

Texas Instruments

ULN2803ADW by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85 °C and has a max supply voltage of 3 V. Ideal for applications requiring buffer or inverter-based peripheral drivers with sink current flow direction.

Details

MAX232IDWR Technical Details

TYPE	DESCRIPTION
Minimum Supply Voltage:	4.5 V
Package Body Material:	PLASTIC/EPOXY
Minimum Supply Voltage-1:	4.5 V
Nominal Supply Voltage:	5 V
Output Characteristics:	TOTEM-POLE
Maximum Time At Peak Reflow Temperature (s):	NOT SPECIFIED
Maximum Seated Height:	2.65 mm
Minimum Out Swing:	10 V
Sub-Category:	Line Driver or Receivers
Surface Mount:	YES
Maximum Supply Current:	10 mA
Terminal Finish:	Nickel/Palladium/Gold (Ni/Pd/Au)
No. of Terminals:	16
Terminal Position:	DUAL
Package Style (Meter):	SMALL OUTLINE
Technology:	BICMOS
JESD-30 Code:	R-PDSO-G16
Package Shape:	RECTANGULAR
Terminal Form:	GULL WING
Maximum Operating Temperature:	85 Cel
Package Code:	SOP
Interface Standard:	EIA-232-F; TIA-232-F; V.28
Interface IC Type:	LINE TRANSCEIVER
Width:	7.5 mm
Nominal Supply Voltage-1:	5 V
Maximum Supply Voltage-1:	5.5 V
Maximum Output Low Current:	3.2 Amp
Moisture Sensitivity Level (MSL):	1
Other Names:	-MAX232IDWRE4-NDR -296-14621-1 2156-MAX232IDWR -MAX232IDWR-NDR -296-14621-1-ND -MAX232IDWRE4 296-14621-2-NDR TEXTISMAX232IDWR 296-14621-6-NDR 296-14621-6 296-14621-2 296-14621-1-NDR 296-14621-1
Output Polarity:	INVERTED
Input Characteristics:	SCHMITT TRIGGER
Driver No. of Bits:	2
Maximum Supply Voltage:	5.5 V
Differential Output:	NO
JESD-609 Code:	e4
Minimum Operating Temperature:	-40 Cel
No. of Functions:	2
Qualification:	Not Qualified
Package Equivalence Code:	SOP16,.4
Receiver No. of Bits:	2
Length:	10.3 mm
Maximum Receive Delay:	0 ns
Additional Features:	EXTERNAL CHARGE PUMP
Peak Reflow Temperature (C):	260
Terminal Pitch:	1.27 mm
Temperature Grade:	INDUSTRIAL
Power Supplies (V):	5

Category Top Products

DRV135UAG4

Texas Instruments

DRV135UAG4 by Texas Instruments is a Line Driver & Receiver with 36V max supply voltage, 18V power supplies, and -55 to 125°C operating temperature range. It features complementary output polarity and differential output for industrial applications requiring high-speed signal transmission in compact designs.

LTM2881MPY-3#PBF

Linear Technology

LINE TRANSCEIVER; Temperature Grade: OTHER; Terminal Form: BALL; No. of Terminals: 32; Package Code: BGA; Package Shape: RECTANGULAR;

MAX3232EIPWRG4

Texas Instruments

MAX3232EIPWRG4 by Texas Instruments is a Line Driver & Receiver with 16 terminals, operating at 3.3/5V. It features inverted output polarity, Schmitt trigger input characteristics, and supports EIA-232-F interface standard. Ideal for industrial applications requiring reliable data transmission over short distances.

MAX232IDW

Texas Instruments

MAX232IDW by Texas Instruments is a line driver and receiver with a max supply voltage of 5.5V. It has 2 functions and is used for EIA-232-F, TIA-232-F, and V.28 interface standards in industrial applications.

ISO3088DWRG4

Texas Instruments

ISO3088DWRG4 by Texas Instruments is a line driver/receiver with 16 terminals, operating at 3.15-5.5V. It offers differential outputs, EIA-422/EIA-485 interfaces, and Schmitt trigger inputs for industrial applications requiring fast transmission speeds and low power consumption. With a compact rectangular package style and dual terminal position, it ensures reliable data communication in harsh environments with an operating temperature range of -40 to 85°C.

SN65HVD1473DGS

Texas Instruments

SN65HVD1473DGS by Texas Instruments is a line driver/receiver with 10 terminals, operating at 3-3.6V. It features EIA-485 interface standard, differential output, and peak reflow temp of 260°C. Ideal for automotive applications due to its small outline package and wide temperature range (-40 to 125°C).

AM26LS31CN

Philips Components

LINE DRIVER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Shape: RECTANGULAR; JESD-30 Code: R-PDIP-T16;

MAX3485ESA+

Analog Devices

MAX3485ESA+ by Analog Devices is a CMOS line transceiver with EIA-422 and EIA-485 interface standards. It operates at 3.3V, has 8 terminals, and offers differential outputs. With a max transmit delay of 35ns, it's ideal for industrial applications requiring high-speed data transmission in harsh environments.

SN65LVDS1DBV

Texas Instruments

SN65LVDS1DBV by Texas Instruments is a line driver with a max supply voltage of 3.6 V and a max transmit delay of 3.1 ns. It is used in applications requiring TTL technology and EIA-644-A/TIA-644-A interface standards.

LTC1535ISW#TRPBF

Linear Technology

LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;

MAX3082ECSA

Maxim Integrated

MAX3082ECSA by Maxim Integrated is a line driver/receiver with 5V supply, 2600ns max transmit delay, and EIA-422/EIA-485 interface. Ideal for applications requiring differential output, such as industrial automation and communication systems.

SN65HVD10DR

Texas Instruments

SN65HVD10DR by Texas Instruments is a line driver and receiver with a max supply voltage of 3.6V. It has a max transmit delay of 16ns and operates in an industrial temperature range. This IC is commonly used as a line transceiver for EIA-485-A, TIA-485-A, and ISO 8482 interfaces.

MAX3483EESA+

Maxim Integrated

LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

SN65HVD11DRG4

Texas Instruments

SN65HVD11DRG4 by Texas Instruments is an 8-terminal line driver with a max supply voltage of 3.6V and operating temperature range of -40 to 85°C. It features a differential output, EIA-485-A interface standard, and peak reflow temperature of 260°C. Ideal for industrial applications requiring reliable communication over long distances.

MAX3430ESA+T

Analog Devices

MAX3430ESA+T by Analog Devices is a BICMOS line transceiver with EIA-422, EIA-485, TIA-485 interface standards. It operates at 3.3V with 8 terminals and offers differential output. Ideal for industrial applications requiring reliable communication over short distances.

SN65LVDS1DBVRG4

Texas Instruments

SN65LVDS1DBVRG4 by Texas Instruments is a Line Driver with 3.6V max supply voltage, 3.1ns max transmit delay, and 85°C max operating temp. Ideal for EIA-644-A/TIA-644-A interface standard applications requiring true output polarity and differential output.

SN65LVDS93ADGG

Texas Instruments

SN65LVDS93ADGG by Texas Instruments is a Line Driver & Receiver with 4 functions, operating at 3.3V. It offers differential output, complementary polarity, and industrial temperature grade suitable for various applications requiring high-speed data transmission over long distances. With a compact design and low power consumption of 116mA, it is ideal for use in industrial automation and communication systems.

ISO1176DWR

Texas Instruments

ISO1176DWR by Texas Instruments is a line driver with 16 terminals, operating at -40 to 85 °C. It has a max supply voltage of 5.5 V and differential output capability. Ideal for industrial applications requiring EIA-485/TIA-485 interface standard compliance with a compact small outline package style.

MAX13487EESA+T

Maxim Integrated

LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

SN751178NSRE4

Texas Instruments

SN751178NSRE4 by Texas Instruments is a Line Driver & Receiver with 2 functions. It operates at 5V, has a max transmit delay of 25ns, and supports EIA-422-B, TIA-422-B, EIA-485-A interfaces. Ideal for applications requiring differential outputs and Schmitt trigger inputs in compact designs.