Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

INA122U

Manufacturer

Texas Instruments
Manufacturer's Part Number

INA122U
Description

INSTRUMENTATION AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Datasheet

Datasheet

Not In Stock

Popular Products

MMBT2222ALT1G

Rochester Electronics

NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .3 W; Maximum Collector Current (IC): .6 A;

Details

1N4148

NXP Semiconductors

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

SS14

Hy Electronic

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BAV99

Hitano Enterprise

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

M39029/58-360

Carlisle Interconnect Technologies

GENERAL CONN ACCESSORY; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; Maximum Operating Temperature: 200 Cel; MIL-Connector Accessory: CONTACT; Terminal Type: CRIMP; MIL Conformity: YES;

Details

CRCW080510K0FKEA

Vishay Intertechnology

Vishay Intertechnology's CRCW080510K0FKEA is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 reference standard compliance and -55 to 155 °C operating temperature range.

Details

MBRS1100T3G

Onsemi

MBRS1100T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.75V. It operates in temperatures ranging from -65 to 175°C, making it suitable for power applications. With a reverse test voltage of 100V, this diode is ideal for high-power circuits requiring efficient rectification.

Details

1N4148

Diotec Semiconductor Ag

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

LAN8720AI-CP-TR

Microchip Technology

LAN8720AI-CP-TR by Microchip is an Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85 °C. It features a 3.3 V supply voltage, 54 mA supply current, and TS 16949 screening level. Ideal for network interfaces in industrial applications due to its compact square package and low profile design.

Details

1N4148

Laube Technology

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

BAV99

SPC TECHNOLOGY/ MULTICOMP

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BAV99

Jgd Semiconductors

RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 150 Cel;

Details

M39029/56-351

TE Connectivity

TE Connectivity's M39029/56-351 is a CRIMP contact type backshell accessory with rated voltage of 115V. It operates b/w -65 to 175 °C, suitable for MIL-C-39029/56 connectors with wire gauge ranging from 28 to 22 AWG. Ideal for military applications requiring female contacts and copper alloy material.

Details

2N7002

Jiangsu Changjiang Electronics Technology

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Operating Mode: ENHANCEMENT MODE; Transistor Application: SWITCHING;

Details

BAV99

Bytesonic Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

DS18B20+

Analog Devices

DS18B20+ by Analog Devices is a 12-bit temperature sensor with 3.3/5V supply, -55 to 125°C range, and ±0.50°C accuracy. It features a 1-Wire interface for digital output and is commonly used in applications requiring precise temperature monitoring in various industries.

Details

STM32H743IIT6

STMicroelectronics

STM32H743IIT6 by STMicroelectronics is a 32-bit microcontroller with integrated cache and a max supply voltage of 3.6V. It is commonly used in industrial applications due to its wide temperature range (-40°C to 85°C) and various connectivity options (CAN, I2C, UART, USB).

Details

U.FL-R-SMT-1(10)

Hirose Electric

U.FL-R-SMT-1(10) by Hirose Electric is a RF connector with 50 ohm impedance, 0.05 dB insertion loss, and 8 GHz operating frequency. Ideal for board mounting in commercial applications, it features gold termination finish, liquid crystal polymer insulator, and 200VAC dielectric voltage resistance.

Details

2N2222A

General Transistor

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

DS18B20

Dallas Semiconductor

TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Shape or Style: ROUND; Housing: PLASTIC; Output Interface Type: 1-WIRE INTERFACE;

Details

INA122U Technical Details

TYPE	DESCRIPTION
Package Body Material:	Plastic/Epoxy
Maximum Time At Peak Reflow Temperature (s):	30 s
Maximum Seated Height:	0.069 in (1.75 mm)
Nominal Bandwidth (3dB):	120 kHz
Maximum Supply Voltage Limit:	18 V
Maximum Bias Current (IIB) @25C:	25 nA
Sub-Category:	Instrumentation Amplifiers
Maximum Supply Current:	85 μA
Surface Mount:	Yes
Terminal Finish:	Nickel Palladium Gold
No. of Terminals:	8
Maximum Input Offset Voltage:	250 µV
Terminal Position:	Dual
Package Style (Meter):	Small Outline
JESD-30 Code:	R-PDSO-G8
Minimum Voltage Gain:	5
Package Shape:	Rectangular
Terminal Form:	Gull Wing
Maximum Operating Temperature:	85 °C (185 °F)
Package Code:	SOP
Amplifier Type:	Instrumentation Amplifier
Nominal Slow Rate:	0.08 V/us
Width:	0.154 in (3.9 mm)
Moisture Sensitivity Level (MSL):	3
Maximum Voltage Gain:	10000
Maximum Non Linearity:	0.002 %
Nominal Voltage Gain:	100
Packing Method:	Tube
JESD-609 Code:	e4
Minimum Operating Temperature:	-40 °C (-40 °F)
Maximum Average Bias Current (IIB):	-25 nA
No. of Functions:	1
Qualification:	No
Minimum Common Mode Reject Ratio:	83 dB
Package Equivalence Code:	SOP8,.25
Length:	0.193 in (4.9 mm)
Nominal Supply Voltage / Vsup (V):	15 V
Peak Reflow Temperature (C):	260 °C (500 °F)
Maximum Negative Supply Voltage Limit:	-18 V
Terminal Pitch:	0.05 in (1.27 mm)
Maximum Input Offset Current (IIO):	2 nA
Temperature Grade:	Industrial
Power Supplies (V):	2.2/36/±18 V

Category Top Products

LT1101ISW#PBF

Linear Technology

INSTRUMENTATION AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;

AD625KN

Analog Devices

AD625KN by Analog Devices is an Instrumentation Amplifier with 50uV Max Input Offset Voltage, 0.025uA Max Average Bias Current, and 15V Nominal Voltage. Ideal for precision signal processing in industrial automation, medical devices, and test equipment applications.

AMP04FS

Analog Devices

INSTRUMENTATION AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

INA114BP

Burr-Brown Corporation

INSTRUMENTATION AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

INA2126EA/2K5

Texas Instruments

INA2126EA/2K5 by Texas Instruments is an instrumentation amplifier with a max input offset voltage of 500uV and max bias current of 0.05uA. It operates at a nominal voltage of +-15V, making it suitable for industrial applications requiring precise signal amplification in tight spaces. With a bandwidth of 0.2MHz and high common mode rejection ratio of 83dB, this amplifier is ideal for sensitive measurement tasks in harsh environments.

AD8420ARMZ

Analog Devices

AD8420ARMZ by Analog Devices is an instrumentation amplifier with 250uV max input offset voltage, 15V nominal voltage, and 1 V/us slow rate. It is used in industrial applications for precise signal amplification due to its high gain of 1000 and low bias current of 0.027uA. The package style is small outline, thin profile, making it suitable for space-constrained designs.

INA321E/250G4

Texas Instruments

INA321E/250G4 by Texas Instruments is an instrumentation amplifier with 500uV max input offset voltage, 0.00001uA max average bias current, and 5V nominal voltage. Ideal for military applications due to its -55 to 125 °C operating temperature range and 90dB min common mode reject ratio.

AD8221ARZ-REEL

Analog Devices

AD8221ARZ-REEL by Analog Devices is an instrumentation amplifier with a max input offset voltage of 60uV and max average bias current of 0.0015uA. It is ideal for industrial applications requiring precise signal amplification, featuring a nominal bandwidth of 0.825MHz and a max voltage gain of 1000. The package style is small outline, making it suitable for surface mount designs in temperature-sensitive environments.

INA823DR

Texas Instruments

INA823DR by Texas Instruments is an instrumentation amplifier with 100uV max input offset voltage, 1.9MHz bandwidth, and 120dB min CMRR. Ideal for precision signal processing in medical devices, industrial automation, and test equipment due to its small outline package and low bias current of 0.008uA.

EL8170FSZ-T7

Intersil

INSTRUMENTATION AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

AD8231WACPZ-RL

Analog Devices

AD8231WACPZ-RL by Analog Devices is an Instrumentation Amplifier with 15uV Max Input Offset Voltage, 0.005uA Max Average Bias Current, and 1MHz Nominal Bandwidth. Ideal for automotive applications due to AEC-Q100 screening level and -40 to 125 °C operating temperature range.

XTR105U/2K5

Burr-Brown Corporation

INSTRUMENTATION AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR;

INA111BPG4

Texas Instruments

INA111BPG4 by Texas Instruments is an instrumentation amplifier with 2 MHz bandwidth, 10000 voltage gain, and 80 dB CMRR. It operates in industrial temperature range and has a max supply current of 4.5 mA. Ideal for precision signal conditioning in various applications.

AD8428BRZ-RL

Analog Devices

INSTRUMENTATION AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

INA141U/2K5

Burr-Brown Corporation

INSTRUMENTATION AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

LTC2053CDD#TRPBF

Linear Technology

INSTRUMENTATION AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: NO LEAD; No. of Terminals: 8; Package Code: HVSON; Package Shape: SQUARE;

LT1167AIS8#PBF

Linear Technology

INSTRUMENTATION AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

INA126P

Texas Instruments

INA126P by Texas Instruments is an instrumentation amplifier with a max input offset voltage of 250 uV, max average bias current of 0.025 uA, and a nominal bandwidth of 0.2 MHz. It is commonly used in industrial applications for precise signal amplification and measurement.

XTR103BU

Texas Instruments

XTR103BU by Texas Instruments is an instrumentation amplifier with 2500uV max input offset voltage, 0.25uA max average bias current, and 24V nominal voltage. Ideal for industrial applications requiring high precision amplification in a compact package.

AD8250ARMZ

Analog Devices

AD8250ARMZ by Analog Devices is an instrumentation amplifier with a max voltage gain of 10 and bandwidth of 10 MHz. It operates at industrial temperature grades, with low bias current (0.04 uA) making it suitable for precision measurement applications requiring high common mode rejection ratio (80 dB). The package is small outline, thin profile, ideal for space-constrained designs.