Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

DRV5011ADDMRR

Manufacturer

Texas Instruments
Manufacturer's Part Number

DRV5011ADDMRR
Description

MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: SURFACE MOUNT; Output Type: CURRENT OUTPUT; Package Shape or Style: RECTANGULAR; Output Range: -5-20mA; Body Height: .4 mm;
Datasheet

Datasheet

Not In Stock

Popular Products

LM358D-T

NXP Semiconductors

LM358D-T by NXP Semiconductors is a dual operational amplifier with 70dB CMRR, 1000kHz unity gain bandwidth, and 9000uV max input offset voltage. Widely used in commercial applications due to its small outline package and low bias current of 0.5uA.

Details

SS14

Silicon Standard

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

MBR0520LT1

Motorola

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BAV99

Meritek Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM358DT

STMicroelectronics

LM358DT by STMicroelectronics is a dual operational amplifier with a max input offset voltage of 9000 uV. It operates at a nominal voltage of 5V and has a min voltage gain of 25000. This amplifier is commonly used in applications requiring high precision and low power consumption.

Details

OPA2277UA/2K5E4

Texas Instruments

OPA2277UA/2K5E4 by Texas Instruments is a dual operational amplifier with low-offset and micropower features. It has a max input offset voltage of 100uV, nominal common mode reject ratio of 140dB, and min slew rate of 0.8V/us. Ideal for industrial applications requiring precise signal amplification in compact designs.

Details

1N4148

American Power Devices

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

2N7002-T1-E3

Vishay Intertechnology

Vishay Intertechnology's 2N7002-T1-E3 is a N-CHANNEL FET for SWITCHING applications. Features include 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. With ENHANCEMENT MODE operation, this GULL WING transistor is ideal for small outline surface mount designs up to 150°C.

Details

LM358MX

Fairchild Semiconductor

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

Details

ISO1050DUBR

Texas Instruments

ISO1050DUBR by Texas Instruments is a network interface IC with 8 terminals, operating from -55 to 105°C. It features a small outline package, nickel palladium gold finish, and gull wing terminal form. Ideal for telecom applications requiring a 5V supply voltage and peak reflow temperature of 260°C.

Details

1N4148WS

Diodes Incorporated

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BAV99

North American Philips Discrete Products Div

RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .1 A;

Details

LL4148

Eic Semiconductor

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

BSS138

Siemens

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain-Source On Resistance: 3.5 ohm; Terminal Finish: Tin/Lead (Sn/Pb);

Details

MMBF170LT1G

Onsemi

MMBF170LT1G by Onsemi is a N-CHANNEL FET with 60V DS Breakdown Voltage and 0.5A Drain Current. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with a max power dissipation of 0.225W. This small outline transistor has a temperature range from -55 to 150 °C.

Details

LM317T

Texas Instruments

LM317T by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. Operating temperature ranges from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. With a max output current of 1.5A, this through-hole package regulator is ideal for power supply designs where adjustable voltage levels are needed.

Details

SMBJ18CA

Synsemi

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BAV99+

Multicomp Pro

BAV99+ by Multicomp Pro is a series connected diode with 0.2A output current and 75V peak reverse voltage. Its 0.006us reverse recovery time makes it ideal for high-speed applications. This small outline rectifier diode is designed for surface mount installation in electronic circuits.

Details

SS14

Continental Device India

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

FT232RL-TUBE

FTDI

FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.

Details

DRV5011ADDMRR Technical Details

TYPE	DESCRIPTION
Minimum Supply Voltage:	2.5 V
Minimum Range Of Magnetic Field:	-3.8 mT
Maximum Operating Current:	3 mA
Maximum Supply Voltage:	5.5 V
Output Range:	-5-20mA
Output Type:	CURRENT OUTPUT
Maximum Output Current:	20 A
Housing:	PLASTIC
Terminal Finish:	Matte Tin (Sn)
JESD-609 Code:	e3
Minimum Operating Temperature:	-40 Cel
Mounting Feature:	SURFACE MOUNT
Body Width:	1.1 inch
Sensors or Transducers Type:	MAGNETIC FIELD SENSOR,HALL EFFECT
Maximum Magnetic Field Range:	3.8 mT
Package Shape or Style:	RECTANGULAR
Termination Type:	SOLDER
Input Mode:	BIPOLAR(LATCHED)
Output (V):	PUSH-PULL
Body Height:	.4 mm
Additional Features:	IT HAVE SENSITIVITY OF PLUS OR MINUS 2 MT
Body Length/Diameter:	1.4 mm
Maximum Operating Temperature:	135 Cel
Hysteresis:	4 mT

Category Top Products

AH182-WG-7

Diodes Incorporated

AH182-WG-7 by Diodes Inc. is a magnetic field sensor with 1mT hysteresis, 5.5V max supply voltage, and 0.30V output range. Ideal for applications requiring Hall effect sensors, it operates b/w -40 to 85°C and has a non-inverting analog voltage output suitable for surface mounting.

A1152LUA-T

Allegro MicroSystems

MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Maximum Operating Temperature: 150 Cel;

A1223LUA-T

Allegro MicroSystems

MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 30-60mA;

ALS31000LLHALX

Allegro MicroSystems

MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: SURFACE MOUNT; Output Type: ANALOG VOLTAGE; Package Shape or Style: RECTANGULAR; Terminal Finish: TIN; Minimum Operating Temperature: -40 Cel;

DRV5032FALPGM

Texas Instruments

Texas Instruments' DRV5032FALPGM is a magnetic field sensor with 3 terminals, operating voltage range of 1.65-5.5V, and hysteresis of 1.5mT. Ideal for applications requiring digital current output in the -40 to 85°C temperature range, such as proximity sensing and position detection in various industries.

DRV5032DUDMRT

Texas Instruments

MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: SURFACE MOUNT; Output Type: DIGITAL VOLTAGE; Package Shape or Style: RECTANGULAR; Output Range: 0-5.5V; Additional Features: IT ALSO HAS MAGNETIC RANGE -3.5 TO -1.2 MILLI TESLA AND SENSITIVITY 3.9 MILLI TESLA;

TLE4998S8DXUMA1

Infineon Technologies

MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: SURFACE MOUNT; Output Type: DIGITAL CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 0-5mA; Maximum Operating Temperature: 125 Cel;

TLE4964-2M

Infineon Technologies

TLE4964-2M by Infineon is a magnetic field sensor with 32V max supply voltage, 5.5mT hysteresis, and 0-25mA output range. Ideal for applications requiring current output sensing in a compact rectangular package, such as automotive systems or industrial automation.

DRV5032FCLPG

Texas Instruments

Texas Instruments' DRV5032FCLPG is a magnetic field sensor with 1.5 mT hysteresis, -40 to 85°C operating temp range, and 5.5V max supply voltage. Ideal for applications requiring digital current output in a compact rectangular package.

SS494B-T3

Honeywell Sensing And Control

SS494B-T3 by Honeywell is a magnetic field sensor with 3 terminals, operating voltage of 4.5-10.5V, and sensitivity of 5mV/G. It features a transistor output circuit type and can detect magnetic fields ranging from -42mT to 42mT. Ideal for applications requiring precise analog current output in temperature-sensitive environments up to 150°C.

55075-00-05-A

Hamlin Electronics Europe

MAGNETIC FIELD SENSOR,HALL EFFECT; Output Type: DIGITAL CURRENT; Package Shape or Style: CYLINDRICAL; Output Range: 20mA; Maximum Supply Voltage: 25.2 V; Minimum Operating Temperature: -40 Cel;

APS11060LLHALX-0PL

Allegro MicroSystems

Magnetic Field Sensors; JESD-609 Code: e3; Terminal Finish: MATTE TIN;

A1324LUA-T

Allegro MicroSystems

Allegro MicroSystems A1324LUA-T is a magnetic field sensor with 5V supply, 1.5% linearity, and 5000mV/G sensitivity. Ideal for applications requiring precise analog voltage output in temperatures ranging from -40 to 150°C. Features single-ended output circuit and BICMOS technology for accurate measurements.

A1123LLHLX-T

Allegro MicroSystems

Allegro MicroSystems' A1123LLHLX-T is a magnetic field sensor with 24V max supply voltage, 5.5mT hysteresis, and -40 to 150°C operating temperature range. Ideal for automotive applications due to AEC-Q100 screening level, it features a current output of 30-60mA and BICMOS technology for precise unipolar magnetic field detection.

SS411A-T2

Honeywell Sensing And Control

MAGNETIC FIELD SENSOR,HALL EFFECT; Power Supplies (V): 3.8/30;

DRV5013FAEDBZRQ1

Texas Instruments

MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: SURFACE MOUNT; Output Type: CURRENT OUTPUT; Package Shape or Style: RECTANGULAR; Output Range: 0-30mA; JESD-609 Code: e3;

TLE5011FUMA1

Infineon Technologies

TLE5011FUMA1 by Infineon is a magnetic field sensor with 5.5V max supply voltage, 30mT hysteresis, and 0.40-0.70V digital output range. Ideal for applications requiring precise magnetic field measurements in compact spaces due to its small body dimensions of 4" x 1.75mm x 5mm and surface mounting feature.

A3516LUA

Allegro MicroSystems

MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: DIGITAL VOLTAGE; Package Shape or Style: RECTANGULAR; Output Range: 0.2-4.7V;

A1210LUA-T

Allegro MicroSystems

Allegro MicroSystems' A1210LUA-T is a magnetic field sensor with 24V max supply voltage, 15.5mT hysteresis, and 400mV output range. Ideal for applications requiring precise non-inverting analog voltage output in a compact rectangular package.

AH8500-FDC-7

Diodes Incorporated

Diodes Inc. AH8500-FDC-7 is a 3.6V magnetic field sensor with 99.9% linearity, ideal for Hall effect applications. Operating b/w -40°C to 85°C, it offers voltage output and consumes 2.4mA current, suitable for surface mount installations in various industries.