ACS718KMATR-20B-T by Allegro MicroSystems

Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

ACS718KMATR-20B-T

Manufacturer

Allegro MicroSystems
Manufacturer's Part Number

ACS718KMATR-20B-T
Description

MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Output Type: ANALOG VOLTAGE; Package Shape or Style: RECTANGULAR; Termination Type: SOLDER;
Datasheet

Datasheet

Not In Stock

Popular Products

LM107H

Raytheon Semiconductor

OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;

Details

BSS138W-7-F

Diodes Incorporated

Diodes Inc.'s BSS138W-7-F is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, Gull Wing terminals, and operates in enhancement mode. With 0.2A max drain current and 3.5 ohm RDS(on), it's UL recognized and suitable for small outline packages at temperatures ranging from -55 to 150°C.

Details

LM358DR2G

Onsemi

LM358DR2G by Onsemi is a dual operational amplifier with 7000uV max input offset voltage and 70dB nominal CMRR. Ideal for applications requiring low bias current such as sensor interfaces, signal conditioning circuits, and audio amplifiers. Package style: Small Outline, Technology: Bipolar, Unity Gain Bandwidth: 1000 kHz.

Details

SS14

Vishay Intertechnology

Vishay Intertechnology's SS14 is a Schottky rectifier diode with a max forward voltage of 0.5V and output current of 1A. Operating at up to 125°C, it has a repetitive peak reverse voltage of 40V. Ideal for surface mount applications, it suits various electronic circuits requiring efficient rectification and low forward voltage drop.

Details

1N4148WS-7-F

Diodes Incorporated

1N4148WS-7-F by Diodes Inc. is a single rectifier diode with max reverse recovery time of 0.004 us and max reverse current of 1 uA. It operates b/w -65 to 150 °C, ideal for applications requiring small outline surface mount diodes with a max output current of 0.15 A.

Details

1N4148

Itt Semiconductor

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

LM317T

Micro Commercial Components

ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Moisture Sensitivity Level (MSL): 1; Maximum Output Current-1: 1.5 A; Operating Temperature (TJ-Min): 0 Cel;

Details

SMBJ18CA

Shenzhen Socay Electronics

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148

Transys Electronics

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

DS18B20U

Maxim Integrated

DS18B20U by Maxim Integrated is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.

Details

2N7002

Motorola

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified; Minimum Operating Temperature: -55 Cel;

Details

OHN3020U

Tt Electronics Plc

OHN3020U by Tt Electronics Plc is a magnetic field sensor with a max supply voltage of 24V and hysteresis of 5mT. It features an output range of 25mA and operates in temperatures ranging from -20 to 85°C. Ideal for applications requiring precise detection and measurement of magnetic fields, such as automotive sensors or industrial automation systems.

Details

2N2222A

New Jersey Semiconductor Products

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;

Details

SMMBT3904LT1G

Onsemi

SMMBT3904LT1G by Onsemi is a NPN BJT with 3 terminals, 0.3W power dissipation, and 40V max collector-emitter voltage. Ideal for small outline applications requiring a transistor with hFE of at least 30, it operates up to 150°C and has a transition frequency of 300MHz.

Details

BSS123-7-F

Diodes Incorporated

BSS123-7-F by Diodes Inc. is a N-channel FET with 100V DS breakdown voltage and 0.17A drain current. Ideal for switching applications, it features a single configuration with built-in diode, operates in enhancement mode, and has a max power dissipation of 0.3W.

Details

RC0402FR-0710KL

Yageo

Yageo's RC0402FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance, suitable for applications requiring a rated power dissipation of 0.0625 W. With a temperature coefficient of 100 ppm/°C, it operates b/w -55 to 155 °C, making it ideal for various electronic circuits.

Details

BSS138

Good-ark Electronics

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;

Details

2N7002

Teledyne Components

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-PDSO-G3; Maximum Operating Temperature: 150 Cel; No. of Terminals: 3;

Details

BSS138

Calogic

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Drain Current (Abs) (ID): .2 A;

Details

BAV99

Fairchild Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

ACS718KMATR-20B-T Technical Details

TYPE	DESCRIPTION
Minimum Supply Voltage:	4.5 V
Package Body Material:	PLASTIC/EPOXY
Maximum Operating Current:	9 mA
Maximum Supply Voltage:	5.5 V
Output Type:	ANALOG VOLTAGE
Minimum Operating Temperature:	-40 Cel
Mounting Feature:	SURFACE MOUNT
Body Width:	7.5 inch
Sensors or Transducers Type:	MAGNETIC FIELD SENSOR,HALL EFFECT
No. of Terminals:	16
Package Equivalence Code:	SOP16,.4
Package Shape or Style:	RECTANGULAR
Termination Type:	SOLDER
Technology:	BICMOS
Body Height:	2.65 mm
Additional Features:	IT HAVE SENSITIVITY OF 100 MV/A
Body Length/Diameter:	10.3 mm
Maximum Operating Temperature:	125 Cel

Category Top Products

OHS3040U

Optek Technology

MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 25mA;

OMH3075S

Tt Electronics Plc

MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 21mA;

DRV5023AJQDBZT

Texas Instruments

DRV5023AJQDBZT by Texas Instruments is a magnetic field sensor with a supply voltage range of 2.5V to 38V and hysteresis of 3.7mT. It operates in temperatures from -40°C to 125°C, providing a digital voltage output via open-drain interface. Ideal for applications requiring precise magnetic field detection in compact designs using surface mount technology.

AH3364Q-P-B

Diodes Incorporated

MAGNETIC FIELD SENSOR,HALL EFFECT; Terminal Finish: MATTE TIN; JESD-609 Code: e3;

SS443A-T2

Honeywell Sensing And Control

SS443A-T2 by Honeywell is a magnetic field sensor with a plastic/epoxy body, operating voltage range of 3.8-30V, and output current up to 20A. It is ideal for applications requiring precise detection of magnetic fields in the range of 7.5-18mT, such as automotive sensors or industrial automation systems.

SS413A-L

Honeywell Sensing And Control

MAGNETIC FIELD SENSOR,HALL EFFECT;

HAL506UA-A

TDK

HAL506UA-A by TDK is a magnetic field sensor with 24V max supply voltage, 2mT hysteresis, and 0-20mA analog current output. Ideal for applications requiring precise magnetic field detection in compact spaces due to its small body dimensions of 1.5" width, 4.05mm height, and rectangular shape with through-hole mounting feature.

ACS724LMATR-30AB-T

Allegro MicroSystems

ACS724LMATR-30AB-T by Allegro MicroSystems is a magnetic field sensor with a voltage output range of 0.5-4.5V. It operates in temperatures ranging from -40 to 150°C and has a max supply voltage of 5.5V. This sensor is commonly used in automotive applications due to its AEC-Q100 screening level and surface mount mounting feature.

S-5712ACNL1-M3T1U

Ablic

MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Output Type: VOLTAGE OUTPUT; Package Shape or Style: RECTANGULAR; Output Range: 0.40-1.45V;

A1222LLHLT-T

Allegro MicroSystems

Allegro MicroSystems' A1222LLHLT-T is a magnetic field sensor with 22 mT hysteresis, 3-24 V power supplies, and -40 to 150°C operating temperature range. Ideal for applications requiring precise analog current output in a compact rectangular package.

PDRV5033FAQDBZR

Texas Instruments

MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: SURFACE MOUNT; Output Type: DIGITAL VOLTAGE; Package Shape or Style: RECTANGULAR; Output Range: 0-38V; Maximum Operating Current: 3.6 mA;

A1326LLHLX-T

Allegro MicroSystems

Allegro MicroSystems' A1326LLHLX-T is a magnetic field sensor with 5.5V max supply voltage, 1.5% linearity, and 2500 mV/G sensitivity. Ideal for applications requiring precise analog voltage output in temperature range of -40 to 150°C.

S-5712ANDL2-M3T1U

Seiko Instruments Usa

MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: SURFACE MOUNT; Output Type: VOLTAGE OUTPUT; Package Shape or Style: RECTANGULAR; Output Range: 0.4V; Minimum Operating Temperature: -40 Cel;

EW-403

Asahi Kasei Microdevices

The Asahi Kasei Microdevices EW-403 is a Hall effect magnetic field sensor with a supply voltage range of 2.5V to 5.5V and output voltage of 0.40V. It operates in temperatures from -30°C to 115°C, with a hysteresis of 10mT and max magnetic field range of ±20mT. Ideal for applications requiring precise magnetic field detection in compact spaces.

HMC1052L

Honeywell

HMC1052L by Honeywell is a magnetic field sensor with a max supply voltage of 20V. It has a sensitivity of 1mV/G and can operate in temperatures ranging from -40°C to 125°C. This sensor is commonly used for measuring magnetic fields in various applications.

TLE4998S8DXUMA1

Infineon Technologies

MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: SURFACE MOUNT; Output Type: DIGITAL CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 0-5mA; Maximum Operating Temperature: 125 Cel;

ACS724LMATR-50AU-T

Allegro MicroSystems

Allegro MicroSystems' ACS724LMATR-50AU-T is a magnetic field sensor with voltage output range of 0.5-4.5V, ideal for automotive applications due to AEC-Q100 screening and operating temperature range of -40 to 150°C. It features single-ended output circuit type, BICMOS technology, and surface mounting feature.

SS94A2D

Honeywell Sensing And Control

SS94A2D by Honeywell is a magnetic field sensor with 1mV/G sensitivity, 4V output range, and single-ended output type. It operates on 6.6/12.6V power supplies and has a max operating current of 30mA. Ideal for applications requiring precise magnetic field detection in a compact rectangular package with through-hole mounting feature.

AH3574-P-B

Diodes Incorporated

MAGNETIC FIELD SENSOR,HALL EFFECT; JESD-609 Code: e3; Terminal Finish: MATTE TIN;

SS449A

Honeywell Sensing And Control

SS449A by Honeywell is a magnetic field sensor with 1.5 mT hysteresis, operating voltage range of 3.8-30 V, and output current up to 20 A. It is ideal for applications requiring precise detection of magnetic fields in a compact rectangular package made of plastic/epoxy material.