Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

W3S

Manufacturer

TE Connectivity
Manufacturer's Part Number

W3S
Description

CONNECTOR ACCESSORY; IEC Conformity: NO; Usage: DT SERIES; Maximum Operating Temperature: 125 Cel; Assembly Item Name: WEDGE ITEM; Maximum Wire Size: 0 AWG;
Datasheet

Datasheet

Not In Stock

Popular Products

SMMBT2222ALT1G

Onsemi

SMMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, 0.6A IC, and 40V VCE. It has a hFE of 75, fT of 300MHz, and operates up to 150°C. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance.

Details

LM7805CT/NOPB

National Semiconductor

FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Max): 125 Cel; Maximum Output Voltage-1: 5.25 V;

Details

ULN-2803A

Vishay Sprague

Vishay Sprague's ULN-2803A is an 8-bit peripheral driver with a max supply voltage of 3V. Featuring open-collector output characteristics, it offers built-in transient protections and operates b/w -20°C to 85°C. Ideal for applications requiring sink current flow direction, this rectangular-shaped driver has a terminal pitch of 2.54mm and turn-on/off time of 1us.

Details

BAV99W-7-F

Diodes Incorporated

Diodes Incorporated BAV99W-7-F is a fast recovery rectifier diode with 2 elements in series connected, center tap configuration. It has a max reverse recovery time of 0.004 us and can handle a max output current of 0.15 A. Ideal for applications requiring fast switching capabilities and operating temperatures ranging from -65 to 150 °C.

Details

LL4148

TDK

RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); No. of Phases: 1; No. of Elements: 1; Maximum Output Current: .2 A;

Details

SS14

Goodwork Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

B340A-13-F

Diodes Incorporated

B340A-13-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 3A max output current, and 0.5V max forward voltage. It is used for efficiency applications in electronics due to its small outline package and high operating temperature range of -55°C to 150°C.

Details

SMBJ18CA

Pulse Electronics

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

ERJ3GEY0R00V

Panasonic

ERJ3GEY0R00V by Panasonic is a SMT fixed resistor with 0 ohm resistance, suitable for jumper applications. It features a metal glaze/thick film technology, rated for temperatures b/w -55 to 155 °C. With a compact rectangular construction and matte tin over nickel terminal finish, it is ideal for surface mount installations in various electronic devices.

Details

2N2222A

Secos

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .6 A; JEDEC-95 Code: TO-92;

Details

1N4148WT

Good-ark Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148

Jgd Semiconductors

RECTIFIER DIODE; Surface Mount: NO; Maximum Operating Temperature: 175 Cel; Maximum Reverse Recovery Time: .004 us; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V;

Details

OHN3020U

Tt Electronics Plc

OHN3020U by Tt Electronics Plc is a magnetic field sensor with a max supply voltage of 24V and hysteresis of 5mT. It features an output range of 25mA and operates in temperatures ranging from -20 to 85°C. Ideal for applications requiring precise detection and measurement of magnetic fields, such as automotive sensors or industrial automation systems.

Details

OHN3140U

Tt Electronics Plc

OHN3140U by Tt Electronics Plc is a magnetic field sensor with a max supply voltage of 24V and hysteresis of 2mT. It features an output range of 25mA and operates b/w -20 to 85°C. Ideal for applications requiring precise detection and measurement of magnetic fields in various industries.

Details

ATMEGA328P-AU

Microchip Technology

ATMEGA328P-AU by Microchip: 8-bit RISC CPU, 20 MHz clock, 23 I/O lines. Ideal for industrial applications with SPI, TWI, USART connectivity and low power mode. Features include 2048 RAM bytes, 1024 EEPROM size, and 16384 ROM words.

Details

M39029/56-351

Amphenol

CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Additional Features: STANDARD: MIL-DTL-38999; Contact Gender: FEMALE; MIL-Connector Accessory Name: CONTACT; Associated Military - Specifications: MIL-DTL-38999;

Details

EPCS4SI8N

Intel

EPCS4SI8N by Intel is a small outline flash memory with 512Kx8 organization, operating at 3.3V. It features a max clock frequency of 40MHz and endurance of 100k write/erase cycles. Ideal for industrial applications requiring configuration memory with serial interface and low standby current consumption.

Details

LM555CMX

Fairchild Semiconductor

PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;

Details

1N4148

Kec

RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Non Repetitive Peak Forward Current: 2 A; Config: SINGLE; Maximum Operating Temperature: 200 Cel;

Details

LL4148

General Semiconductor

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

W3S Technical Details

TYPE	DESCRIPTION
Design:	POWER AND SIGNAL
Wire Gauge (AWG):	0
Usage:	DT SERIES
Maximum Wire Size:	0 AWG
MIL Conformity:	NO
Connector Accessory Type:	CONNECTOR ACCESSORY
Assembly Item Name:	WEDGE ITEM
IEC Conformity:	NO
Maximum Operating Temperature:	125 Cel
Material:	POLYBUTYLENE TEREPHTHALATE
DIN Conformity:	NO
Minimum Operating Temperature:	-55 Cel

Category Top Products

AT60-12-0166

Amphenol

CONNECTOR ACCESSORY;

1-966067-2

TE Connectivity

TE Connectivity 1-966067-2 is a STRANDED cable with 16 AWG wire gauge and 1.5 mm² cross section area. It has a max operating temperature of 105°C, suitable for DISCRETE WIRE applications requiring a straight mounting style.

9019200000

Weidmueller & Kg

TERMINAL BLOCK ACCESSORY; Assembly Item Name: FERRULE; Maximum Wire Size: 12 AWG; IEC Conformity: NO; Approvals (V): CSA; UL; VDE; MIL Conformity: NO;

350689-1

Tyco Electronics Amp

CONNECTOR ACCESSORY; Rated Voltage: 600 V; Rated Current: 19 A; Maximum Cable Entry: .1 inch; Design: POWER; Minimum Cable Entry: .04 inch;

963225-1

TE Connectivity

CONNECTOR ACCESSORY; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG;

1-66103-8

TE Connectivity

TE Connectivity 1-66103-8 is a CRIMP terminal for CPC/G and M SERIES connectors. With a wire gauge of 20 AWG, it supports up to 13A current. Made of brass, it's ideal for power and signal applications in temperatures ranging from -55 to 90°C.

206322-9

TE Connectivity

TE Connectivity's 206322-9 CLAMPING ITEM features Shell Size 17, accommodates up to 0 AWG wire, and 0.703" cable entry. Made of POLYETHYLENE, it mounts STRAIGHT with SCREW option. Ideal for applications requiring secure cable clamping in tight spaces.

T3930102001-000

TE Connectivity

CONNECTOR ACCESSORY; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 125 Cel; Design: POWER AND SIGNAL; Maximum Wire Size: 0 AWG;

W2SC-P012

TE Connectivity

CONNECTOR ACCESSORY; Minimum Operating Temperature: -55 Cel; Design: POWER AND SIGNAL; Maximum Operating Temperature: 125 Cel; Maximum Wire Size: 0 AWG; Wire Gauge (AWG): 0;

1-66109-7

TE Connectivity

TE Connectivity 1-66109-7, a crimp terminal for CPC/G and M series connectors, features brass material, 24-26 AWG wire gauge compatibility, and 13A rated current. Ideal for power and signal applications with CSA/UL approvals and operating temperatures from -55 to 90°C.

AW3P-1939

Amphenol

CONNECTOR ACCESSORY;

1300580035

Molex

CONNECTOR ACCESSORY; MIL Conformity: NO; Material: POLYAMIDE; Assembly Item Name: CAP ITEM; Mounting Option-1: LOCKING; Additional Features: IP67;

1-1469492-8

TE Connectivity

CONNECTOR ACCESSORY; Rated Current: 1 A; Assembly Item Name: GUIDE ITEM; Minimum Operating Temperature: -55 Cel; DIN Conformity: NO; MIL Conformity: NO;

AWM-2SA

Amphenol

CONNECTOR ACCESSORY;

16-02-0086

Molex

CONNECTOR ACCESSORY;

66504-3

TE Connectivity

TE Connectivity 66504-3, a CRIMP terminal CPC connector with 0.6 mm2 cross section area and 105°C max temp, is ideal for AMPLIMITE HDP-20 applications. It supports wire gauge 20 to 24 AWG, rated at 2A current, with female contact gender and signal design.

1SNA199336R2000

TE Connectivity

TERMINAL BLOCK ACCESSORY;

AT06-3S-CAP

Amphenol

CONNECTOR ACCESSORY;

1-66099-5

TE Connectivity

TE Connectivity 1-66099-5 is a crimp terminal for CPC/G and M series connectors. Featuring brass material, it has a cross section area of 1.4 mm2 and can accommodate wire sizes from 18 to 16 AWG. Ideal for power and signal applications with a rated current of 13A at temperatures ranging from -55 to 90°C.

206358-5

TE Connectivity

TE Connectivity's 206358-5 cable clamp has UL approval, shell size of 11, and accommodates up to 0 AWG wire. Ideal for straight mounting with a screw option, made of polyethylene material.