Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

181270-2

Manufacturer

TE Connectivity
Manufacturer's Part Number

181270-2
Description

CONNECTOR ACCESSORY; Rated Voltage: 40 V; Rated Current: 3 A; Minimum Operating Temperature: -40 Cel; Material: PHOSPHOR BRONZE; Minimum Wire Size: 26 AWG;
Datasheet

Datasheet

Not In Stock

Popular Products

ULN2803ADWG4

Texas Instruments

ULN2803ADWG4 by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates at temperatures ranging from -40 to 85°C and has a max supply voltage of 3V. Ideal for applications requiring sink current flow direction in a small outline package style.

Details

SBAV99LT1G

Onsemi

SBAV99LT1G by Onsemi is a rectifier diode with a max repetitive peak reverse voltage of 100V. It has a small outline package style and a fast max reverse recovery time of 0.006 us. It is commonly used in applications requiring low power dissipation and high operating temperatures.

Details

LM317T

Texas Instruments

LM317T by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. Operating temperature ranges from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. With a max output current of 1.5A, this through-hole package regulator is ideal for power supply designs where adjustable voltage levels are needed.

Details

1N4148WT

Formosa Microsemi

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N7002

Central Semiconductor

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .115 A; Maximum Drain Current (Abs) (ID): .115 A;

Details

1N4148WS

Cheng-yi Electronic

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SMBJ18CA

Littelfuse

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BSS138

General Semiconductor

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 50 V; Qualification: Not Qualified;

Details

LM358N

Freescale Semiconductor

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

LL4148

Temic Semiconductors

RECTIFIER DIODE; Terminal Position: END; Terminal Form: NO LEAD; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

BSS138

Weitron Technology

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Form: GULL WING; Terminal Position: DUAL;

Details

2N2222A

Crimson Semiconductor

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

1554216004

Molex

WIRE AND CABLE;

Details

1N4148

Pro-an Electronic

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

SS14

Meritek Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N7002

Sinyork

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Operating Temperature: 85 Cel; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Operating Mode: ENHANCEMENT MODE;

Details

1N4148WS

Diodes Incorporated

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

M39029/58360

Esterline Technologies

CONNECTOR ACCESSORY; Terminal Type: CRIMP; Removal Tools: M81969/14-01; Associated Military - Specifications: MIL-DTL-38999; IEC Conformity: NO; MIL-Connector Accessory Name: CONTACT;

Details

LL4148

Diodes Incorporated

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

CRGCQ0805F10K

TE Connectivity

TE Connectivity's CRGCQ0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance.

Details

181270-2 Technical Details

TYPE	DESCRIPTION
Wire Gauge (AWG):	23
Maximum Wire Size:	23 AWG
IEC Conformity:	NO
Cross Section Area:	.32 mm2
Minimum Wire Size:	26 AWG
Design:	SIGNAL
MIL Conformity:	NO
Finish Thickness:	15
Contact Gender:	FEMALE
Assembly Item Name:	CONTACT
Maximum Operating Temperature:	80 Cel
Rated AC Voltage:	40 V
Contact Resistance:	7 mohm
DIN Conformity:	NO
Mounting Style:	STRAIGHT
Other Names:	-181270-2-SI -AMP-0-0181270-2-SI -AMP-0-0181270-2-LSI -AMP-0-0181270-2-SI-ND 1812702
Minimum Cable Entry:	.035 inch
Terminal Type:	CRIMP
Material:	PHOSPHOR BRONZE
Minimum Operating Temperature:	-40 Cel
Rated Voltage:	40 V
Connector Accessory Type:	CONNECTOR ACCESSORY
Additional Features:	TERMINATION: GOLD FLASH
Rated Current:	3 A
Maximum Cable Entry:	.061 inch

Category Top Products

16-02-0104

Molex

CONNECTOR ACCESSORY;

CP-MSTB

Phoenix Contact

CONNECTOR ACCESSORY; DIN Conformity: NO; IEC Conformity: NO; Assembly Item Name: CODING ITEM; MIL Conformity: NO;

9004440000

Weidmueller & Kg

TERMINAL BLOCK ACCESSORY; IEC Conformity: NO; Assembly Item Name: FERRULE; MIL Conformity: NO; DIN Conformity: NO; Maximum Wire Size: 20 AWG;

1313600000

Weidmueller & Kg

TERMINAL BLOCK ACCESSORY;

350690-1

TE Connectivity

TE Connectivity 350690-1 is a universal mate-n-lok plug and cap housing with crimp terminals. Rated for 600V AC, it has approvals from CSA, UL, and VDE. Featuring stranded construction, it supports wire gauge up to 18 AWG for applications requiring a male power contact design.

131250-006

TE Connectivity

CONNECTOR ACCESSORY; Maximum Operating Temperature: 150 Cel; Minimum Operating Temperature: -75 Cel; Maximum Wire Size: 0 AWG; Material: ELASTOMER;

216-201

Wago

TERMINAL BLOCK ACCESSORY; MIL Conformity: NO; DIN Conformity: NO; IEC Conformity: NO; Maximum Wire Size: 22 AWG; Assembly Item Name: FERRULE;

2-929939-1

TE Connectivity

TE Connectivity's 2-929939-1 is a DIN-approved CRIMP terminal with stamped contact design. It supports wire gauge from 20 to 17 AWG, rated for 30A current. Ideal for power applications with operating temperatures ranging from -40 to 150°C.

221-513/000-004

Wago

TERMINAL BLOCK ACCESSORY;

M23053/5-106-9

3m Electronic Products Division

ASSEMBLY ITEMS; DIN Conformity: NO; Assembly Item Name: TAPER SLEEVE; IEC Conformity: NO; Jacket Material: CROSSLINKED POLYOLEFIN; MIL Conformity: NO;

AW8S

Amphenol

CONNECTOR ACCESSORY;

3030323

Phoenix Contact

TERMINAL BLOCK ACCESSORY; Rated Current: 41 A; DIN Conformity: NO; Assembly Item Name: BLOCK; MIL Conformity: NO; IEC Conformity: NO;

281934-3

TE Connectivity

CONNECTOR ACCESSORY; DIN Conformity: NO; Maximum Operating Temperature: 130 Cel; Material: LSR; Assembly Item Name: SEALING ITEM; MIL Conformity: NO;

2-964269-2

TE Connectivity

CONNECTOR ACCESSORY;

16-02-0105

Molex

CONNECTOR ACCESSORY;

1-794610-1

TE Connectivity

TE Connectivity 1-794610-1 CONTACT is a FEMALE solder terminal with 5A rated current and 250V DC voltage. Designed for POWER applications, it has a stranded construction, 0.52mm2 cross section area, and can accommodate wire sizes from 24 to 20 AWG.

50212-8000

Molex

The Molex 50212-8000 CONTACT is a female assembly product with rated AC/DC voltage of 125V, current of 3A, and contact resistance of 10mohm. It supports wire sizes from 30 to 24 AWG and operates in temperatures ranging from -40 to 105 °C. Ideal for applications requiring reliable electrical connections in various industries.

1-1452424-1

TE Connectivity

CONNECTOR ACCESSORY; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 125 Cel; Minimum Operating Temperature: -40 Cel;

500798020

Molex

The Molex 500798020 assembly product features UL approval, crimp terminal type, and a max operating temperature of 105°C. It is used for the 51021 HOUSING application with contact design CHAIN and rated AC voltage of 125V.

66570-8

TE Connectivity

TE Connectivity 66570-8 is a male signal contact with solder terminal type. It has a max operating temperature of 105°C and min of -55°C. Suitable for CPC connectors and Amplimite HDP-20, it features a finish thickness of 30 microns, wire gauge up to 18 AWG, and rated current of 3.1A.