Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

DTM06-12SB-EE04

Manufacturer

TE Connectivity
Manufacturer's Part Number

DTM06-12SB-EE04
Description

CONNECTOR ACCESSORY; Rated Voltage: 250 V; Rated Current: 7.5 A; Maximum Operating Temperature: 150 Cel; Maximum Cable Entry: .12 inch; Minimum Operating Temperature: -55 Cel;
Datasheet

Datasheet

Not In Stock

Popular Products

BSS138

Fairchild Semiconductor

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Qualification: Not Qualified;

Details

LL4148

Lite-on Semiconductor

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

1N4148

Laube Technology

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

2N7002

Central Semiconductor

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .115 A; Maximum Drain Current (Abs) (ID): .115 A;

Details

1N4148

Continental Device India

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

EPCS4SI8N

Intel

EPCS4SI8N by Intel is a small outline flash memory with 512Kx8 organization, operating at 3.3V. It features a max clock frequency of 40MHz and endurance of 100k write/erase cycles. Ideal for industrial applications requiring configuration memory with serial interface and low standby current consumption.

Details

LM358DR2G

Onsemi

LM358DR2G by Onsemi is a dual operational amplifier with 7000uV max input offset voltage and 70dB nominal CMRR. Ideal for applications requiring low bias current such as sensor interfaces, signal conditioning circuits, and audio amplifiers. Package style: Small Outline, Technology: Bipolar, Unity Gain Bandwidth: 1000 kHz.

Details

SMBJ18CA

KYOCERA AVX

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

ULN2803A

Onsemi

NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified;

Details

BAV99

Weitronic Enterprise

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM317T

Texas Instruments

LM317T by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. Operating temperature ranges from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. With a max output current of 1.5A, this through-hole package regulator is ideal for power supply designs where adjustable voltage levels are needed.

Details

2N7002

National Semiconductor

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Style (Meter): SMALL OUTLINE; Terminal Position: DUAL;

Details

LL4148

Vishay Telefunken

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

OHN3020U

Tt Electronics Plc

OHN3020U by Tt Electronics Plc is a magnetic field sensor with a max supply voltage of 24V and hysteresis of 5mT. It features an output range of 25mA and operates in temperatures ranging from -20 to 85°C. Ideal for applications requiring precise detection and measurement of magnetic fields, such as automotive sensors or industrial automation systems.

Details

2N2222A

SPC TECHNOLOGY/ MULTICOMP

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

ULN2003ADR

Texas Instruments

ULN2003ADR by Texas Instruments is a NPN BJT with 7 elements, max IC of 0.5A, and VCEsat of 1.6V. Ideal for switching applications in small outline packages with Gull Wing terminals.

Details

KSZ9031RNXIA

Microchip Technology

KSZ9031RNXIA by Microchip is a 48-terminal Ethernet transceiver with data rate of 1000 Mbps. Operating temperature range from -40 to 85°C makes it suitable for industrial applications. This square-shaped chip carrier has a very thin profile and matte tin finish, ideal for network interfaces.

Details

BAV99

NXP Semiconductors

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

FDN5618P

Fairchild Semiconductor

P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Transistor Element Material: SILICON; Moisture Sensitivity Level (MSL): 1;

Details

MC33269T-3.3G

Onsemi

MC33269T-3.3G by Onsemi is a fixed positive single output LDO regulator with a max output current of 0.8 A and a dropout voltage of 1.35 V. It is commonly used in applications that require stable voltage regulation, such as power supplies for electronic devices.

Details

DTM06-12SB-EE04 Technical Details

TYPE	DESCRIPTION
Design:	POWER AND SIGNAL
Minimum Cable Entry:	.053 inch
Contact Gender:	FEMALE
Connector Accessory Type:	CONNECTOR ACCESSORY
Maximum Operating Temperature:	150 Cel
Rated Current:	7.5 A
Rated DC Voltage:	250 V
Maximum Cable Entry:	.12 inch
Minimum Operating Temperature:	-55 Cel
Rated Voltage:	250 V

Category Top Products

SWPR-001T-P025

J S T Mfg

SWPR-001T-P025 by J S T Mfg is a UL approved CONTACT for JWPF SERIES CONNECTOR. It features CRIMP terminal type, 26-22 AWG wire size compatibility, and 3A rated current. Ideal for applications requiring FEMALE contacts with COPPER ALLOY material in STRAIGHT mounting style.

1-206062-6

TE Connectivity

TE Connectivity's 1-206062-6 cable clamp is UL approved with shell size 11. It accommodates up to 0 AWG wire and 0.329" cable entry, made of polyethylene for straight mounting with a 5/8-24 UNEF-2B screw option. Ideal for securing cables in various assembly applications.

927771-3

TE Connectivity

TE Connectivity's 927771-3 is a CRIMP terminal with stamped contact design. It has a wire gauge of 17 AWG, rated for 30A current. Ideal for power applications, it can accommodate cables from 0.055 to 0.09 inch and operates b/w -40 to 130°C.

0460-202-20141

TE Connectivity

TE Connectivity's 0460-202-20141 contact features crimp terminal type, machined contact design, and 20 AWG wire gauge. Ideal for power applications with a rated current of 7.5A, operating b/w -55°C to 125°C.

DF13-2630SCFA(05)

Hirose Electric

CONNECTOR ACCESSORY;

1-329631-2

TE Connectivity

CONNECTOR ACCESSORY; Maximum Wire Size: 0 AWG; DIN Conformity: NO; Usage: BNC CONNECTOR; IEC Conformity: NO; MIL Conformity: NO;

16-02-0086

Molex

CONNECTOR ACCESSORY;

66103-4

TE Connectivity

TE Connectivity's 66103-4 is a crimp terminal for CPC/G and M series connectors. With a finish thickness of 30, it supports wire gauge from 24 to 20 AWG and rated current up to 13A. Ideal for power and signal applications with male contact gender.

WM-2P

TE Connectivity

The TE Connectivity WM-2P is an assembly product designed for DTM SERIES applications. With a temperature range of -55 to 125°C, it accommodates wires up to 0 AWG. Made of polybutylene terephthalate, it's ideal for power and signal connections in various industries.

1-1469492-1

TE Connectivity

TE Connectivity 1-1469492-1 is an Assembly Product with max. operating temp. of 105°C and min. operating temp. of -55°C. It features a max wire size of 0 AWG, rated current of 1A, and mounting style in right angle zinc alloy material. Ideal for guiding items in various applications.

963293-1

TE Connectivity

CONNECTOR ACCESSORY; Maximum Operating Temperature: 130 Cel; Minimum Operating Temperature: -40 Cel; Maximum Wire Size: 0 AWG; Wire Gauge (AWG): 0;

A3B-2630SCC

Hirose Electric

A3B-2630SCC by Hirose Electric is a CRIMP terminal CONTACT with FEMALE gender, suitable for STRAIGHT mounting. Made of PHOSPHOR BRONZE, it features BELLOWED contact style and 0.09" terminal length. Ideal for various assembly applications requiring reliable electrical connections.

1418884-3

TE Connectivity

TE Connectivity's 1418884-3 is a CRIMP terminal with stamped contact design. It supports wire gauge up to 15 AWG and rated current of 13 A. Ideal for applications requiring a female contact, with cable entry ranging from 0.074" to 0.094".

M85049/88-19W03

TE Connectivity

CONNECTOR ACCESSORY; Shell Sizes: 19; Maximum Wire Size: 0 AWG; Wire Gauge (AWG): 0; Material: ALUMINUM ALLOY; Maximum Operating Temperature: 175 Cel;

3030527

Phoenix Contact

CONNECTOR ACCESSORY;

WP-2P

TE Connectivity

TE Connectivity's WP-2P is an Assembly Product designed for DTP SERIES. It operates b/w -55°C to 125°C, accommodating wire sizes up to 0 AWG. The material used is Polybutylene Terephthalate, making it suitable for POWER AND SIGNAL applications.

02-09-1119

Molex

Molex 02-09-1119 CONTACT features CRIMP terminals for 22-18 AWG wires. FEMALE gender, BRASS material, and ROUND PIN-SOCKET design make it ideal for STRAIGHT mounting in Assembly Products. With a 0.24" terminal length and 20 finish thickness, it ensures secure connections in various applications.

2CTC-R

Adam Tech

The Adam Tech 2CTC-R is a CRIMP terminal with a rated current of 2A and contact resistance of 20 mohm. It supports wire sizes from 28 to 22 AWG, ideal for applications requiring FEMALE contacts in straight mounting style with SQ PIN-SKT design. Operating temperatures range from -25°C to 85°C.

1SNK908310R0000

TE Connectivity

TE Connectivity's 1SNK908310R0000 is an Assembly Product with POLYAMIDE insulator. It operates b/w -55 to 110 °C, rated at 600V AC/DC and handles up to 57A current. Ideal for applications requiring secure wire connections up to 0 AWG size in various industries.

249-116

Wago

TERMINAL BLOCK ACCESSORY; DIN Conformity: NO; MIL Conformity: NO; Assembly Item Name: END PLATE; IEC Conformity: NO; Usage: TERMINAL BLOCK;