Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

All prices are in USD

Bulk

QTY	Unit Price	Ext Price
57	$0.178	$10.126

794270-1

Manufacturer

TE Connectivity
Manufacturer's Part Number

794270-1
Description

RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Insulator Material: SILICONE RUBBER; Minimum Operating Temperature: -55 Cel; Contact Material: NOT SPECIFIED;
Datasheet

Datasheet

57 In Stock

Popular Products

IRLML6402TRPBF

Infineon Technologies

IRLML6402TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 20V DS Breakdown Voltage, 22A IDM, and 0.065 ohm RDS(on). With a small outline package and matte tin finish, it operates in temperatures from -55 to 150 °C.

Details

2N2222A

STMicroelectronics

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;

Details

SMBJ18CA

Vishay Intertechnology

Vishay Intertechnology's SMBJ18CA is a bidirectional TRANS VOLTAGE SUPPRESSOR DIODE with a max clamping voltage of 29.2 V and a breakdown voltage of 21.05 V. It is surface mountable and commonly used in transient suppression applications.

Details

ULN2803A

Motorola

NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Terminal Position: DUAL; JESD-30 Code: R-PDIP-T18;

Details

FT232RL-REEL

FTDI

FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.

Details

M39029/58-360

Itt Cannon

CONNECTOR ACCESSORY; Alternate Contacts: 030-2042-000; DIN Conformity: NO; Contact Gender: MALE; Terminal Type: WIRE; MIL-Connector Accessory Name: CONTACT;

Details

BAV99

Motorola

RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; JESD-609 Code: e0;

Details

STM8S003F3P6TR

STMicroelectronics

STM8S003F3P6TR by STMicroelectronics is an 8-bit microcontroller with a max clock frequency of 16 MHz. It features 1024 RAM bytes, 128 data EEPROM size, and 5-ch 10-bit ADC channels. Ideal for industrial applications requiring low power mode and connectivity via I2C, SPI, and UART interfaces.

Details

BSS138

NXP Semiconductors

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Terminals: 3; Maximum Drain Current (ID): .2 A; Operating Mode: ENHANCEMENT MODE;

Details

BAV99

Electronic Devices

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SS14

Fairchild Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SMBJ18CA

Bytesonic Electronics

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

OHN3140U

Tt Electronics Plc

OHN3140U by Tt Electronics Plc is a magnetic field sensor with a max supply voltage of 24V and hysteresis of 2mT. It features an output range of 25mA and operates b/w -20 to 85°C. Ideal for applications requiring precise detection and measurement of magnetic fields in various industries.

Details

MBR0520LT1G

Onsemi

MBR0520LT1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, has a peak reflow temperature of 260°C, and a repetitive peak reverse voltage of 20V. This diode is ideal for applications requiring high-speed switching in compact electronic devices.

Details

SS14

Jinan Jingheng Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BAV99

Vishay Telefunken

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM555CN

Intersil

PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;

Details

BAV99

Diodes Incorporated

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

M24308/2-1F

Bel Fuse

D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1750VAC; No. of Connectors: ONE; Mixed Contacts: NO;

Details

LM317T

Integrated Power Semiconductors

Other Regulators; No. of Terminals: 3; Operating Temperature (TJ-Min): 0 Cel; Terminal Pitch: 2.54 mm; Maximum Load Regulation (%): 1.5 %; Nominal Dropout Voltage-1: 3 V;

Details

794270-1 Technical Details

TYPE	DESCRIPTION
Mating Contact Finish:	NOT SPECIFIED
Maximum Wire Size:	14 AWG
Mains Connector Rating:	115/230VAC
IEC Conformity:	NO
Panel Mount:	NO
Empty Shell:	YES
Minimum Wire Size:	20 AWG
MIL Conformity:	NO
Termination Type:	CRIMP
Maximum Operating Temperature (Cel):	105
Contact Gender:	FEMALE
Connector Type:	RECTANGULAR POWER CONNECTOR
Contact Material:	NOT SPECIFIED
Other Names:	-794270-1-SI -794270-1-CSI 7942701 A25397 2266-794270-1
Mixed Contacts:	NO
No. of Ports:	1
EMI Shielded:	NO
Filter Feature:	NO
Mounting Type:	CABLE
Minimum Operating Temperature:	-55 Cel
Total No. of Contacts:	2
Termination Contact Finish:	NOT APPLICABLE
Insulator Material:	SILICONE RUBBER
Additional Features:	MATE-N-LOK
Insulator Color:	BLUE
Option:	GENERAL PURPOSE
DIN Conformance:	NO
Cable Types:	DISCRETE

Category Top Products

03-09-1041

Molex

The Molex 03-09-1041 is a rectangular power connector with a body width of 0.34 inch and depth of 1 inch. It has an insulator material made of POLYAMIDE and can operate in temperatures ranging from -55 to 105 °C. This connector, with a total of 4 contacts, is commonly used in panel mounting applications.

172166-1

TE Connectivity

TE Connectivity 172166-1 is a rectangular power connector with 0.165" contact pitch, rated at 600V and operating from -20 to 105°C. It has POLYAMIDE66 insulation, suitable for commercial applications requiring a durable, polarized housing with crimp termination on cables.

1-794617-2

TE Connectivity

TE Connectivity 1-794617-2 is a Power Connector with 0.118" contact pitch, rated for 250V and 5A signal current. Featuring POLYAMIDE66 insulator, it has a temperature range of -40 to 105°C. Ideal for commercial applications requiring reliable power connections.

43045-2400

Molex

The Molex 43045-2400 is a rectangular power connector with 24 contacts, rated at 5A signal current. It features a mating contact pitch of 0.118", insulation resistance of 1Gohm, and operates b/w -40°C to 105°C. Ideal for board mounting applications requiring durability and reliability under commercial standards.

36804-0001

Molex

RECTANGULAR POWER CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Manufacturer Series: 36804; Contact Material: NOT SPECIFIED;

172310-1202

Molex

Molex 172310-1202 is a rectangular power connector with TIN over Nickel finish. Made of Liquid Crystal Polymer, it has 2 contacts and UL94V-0 flammability rating. Ideal for board mounting applications requiring male solder termination.

1723103108

Molex

Molex 1723103108 Power Connector has dimensions of 1.232" x 0.352" x 0.614". It uses Liquid Crystal Polymer insulator, operates b/w -40°C to 105°C, and has UL Flammability Code 94V-0. Ideal for board mounting applications requiring a male SQ PIN-SKT contact style with 8 contacts.

1648132-1

TE Connectivity

TE Connectivity's 1648132-1 is a rectangular power connector with 40 contacts, rated at 250V. Made of polybutylene terephthalate, it operates b/w -40 to 105°C. Ideal for applications requiring male connectors in black insulator color and UL flammability rating of 94V-0.

43045-0413

Molex

The Molex 43045-0413 is a rectangular power connector with 4 contacts, rated at 5A signal current. It features a mating contact pitch of 0.118", insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for board mounting applications requiring durability and reliability under commercial standards.

87427-0202

Molex

Molex 87427-0202 is a rectangular power connector with 2 contacts, made of brass and polyamide. It has an insulation resistance of 1Gohm, dielectric voltage of 1500VAC, and operates b/w -40 to 105°C. Ideal for board mounting applications requiring durable connectors with matte tin finish.

43650-0501

Molex

The Molex 43650-0501 is a rectangular power connector with 5 contacts, featuring a mating contact pitch of 0.118" and body width of 0.172". Ideal for board mounting applications, it has a termination contact finish of TIN OVER NICKEL and insulator material made of GLASS FILLED LIQUID CRYSTAL POLYMER.

2004530005

Molex

RECTANGULAR POWER CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;

6651777-1

TE Connectivity

TE Connectivity's 6651777-1 is a Power Connector with 3A signal current rating and UL94V-0 flammability code. Featuring POLYPHTALAMIDE insulator, it has 6 contacts in one row with 0.098" spacing for board mounting applications at -40 to 105°C temperature range.

SBS75GBLU

Anderson Power Products

SBS75GBLU by Anderson Power Products is a rectangular power connector with 3 contacts. It features gold over nickel termination contact finish and a polycarbonate insulator material. This crimp termination type connector is commonly used in cable applications.

1723104107

Molex

Molex 1723104107 Power Connector features Liquid Crystal Polymer insulator, 105°C max operating temp, and -40°C min operating temp. Ideal for board mounting applications with 7 contacts and SQ PIN-SKT male contact style.

34729-0200

Molex

RECTANGULAR POWER CONNECTOR; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED;

1954289-1

TE Connectivity

TE Connectivity 1954289-1 is a RECTANGULAR POWER CONNECTOR with Dielectric Withstanding Voltage of 1500VAC. It has a Rated Current of 6A and operates b/w -40 to 105 °C. Ideal for board mounting applications requiring high voltage and current capabilities.

76825-0004

Molex

Molex 76825-0004 is a rectangular power connector with liquid crystal polymer insulator. It features matte tin finish over nickel, rated for 23A signal current. Ideal for board mounting applications in electronics, operating b/w -40°C to 105°C temperature range.

43640-0201

Molex

Molex 43640-0201 is a rectangular power connector with 0.118" contact pitch, suitable for commercial applications. It has a rated current of 5A and insulation resistance of 1Gohm, operating b/w -40 to 105°C. Ideal for cable and panel mounting, it features a polarized housing and durable design lasting up to 30 cycles.

43879-0032

Molex

Molex 43879-0032 is a rectangular power connector with 24 contacts, rated at 8A signal current. It features a mating contact pitch of 0.165", insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for board mounting applications requiring durability and reliability under commercial standards.