Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

B06P-VL

Manufacturer

J S T Mfg
Manufacturer's Part Number

B06P-VL
Description

RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; UL Flammability Code: 94V-0; Empty Shell: NO; Insulator Material: POLYAMIDE66;
Datasheet

Datasheet

Not In Stock

Popular Products

SMBJ18CA

Good-ark Electronics

TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;

Details

261

New England Microwave

Other Interface ICs; No. of Terminals: 14; Package Equivalence Code: FL14(UNSPEC); Power Supplies (V): +-5,-15; Package Body Material: PLASTIC/EPOXY; Surface Mount: YES;

Details

LL4148

Secos

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

SS14

Onsemi

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

261

Mercury Systems

Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;

Details

PIC18F4550-I/PT

Microchip Technology

PIC18F4550-I/PT by Microchip: 8-bit microcontroller with 44 terminals, 48 MHz clock frequency, and USB connectivity. Ideal for industrial applications requiring low power mode and 10-bit ADC channels.

Details

BSS138BK,215

Nexperia

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Peak Reflow Temperature (C): 260; Additional Features: LOGIC LEVEL COMPATIBLE; Maximum Operating Temperature: 150 Cel;

Details

TCA6424ARGJR

Texas Instruments

TCA6424ARGJR by Texas Instruments is a CMOS parallel I/O port with 24 bits and 3 ports. It operates b/w -40 to 85°C, suitable for industrial applications. With a max clock frequency of 0.4 MHz, it offers low power consumption at only 0.03 mA supply current.

Details

LM107H

General Electric Solid State

OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Minimum Voltage Gain: 25000;

Details

OHN3140U

Tt Electronics Plc

OHN3140U by Tt Electronics Plc is a magnetic field sensor with a max supply voltage of 24V and hysteresis of 2mT. It features an output range of 25mA and operates b/w -20 to 85°C. Ideal for applications requiring precise detection and measurement of magnetic fields in various industries.

Details

FDLL4148

National Semiconductor

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

NC7WZ07P6X

Fairchild Semiconductor

BUFFER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR;

Details

BAV99

Secos

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM555CMX

Texas Instruments

LM555CMX by Texas Instruments is an Analog Waveform Generation IC with 8 terminals. It operates at a nominal voltage of 5V and supports power supplies ranging from 5V to 15V. This versatile IC, housed in a small outline package, is commonly used for pulse and rectangular waveform generation in commercial temperature environments.

Details

LM358N

Samsung

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

2N2222A

Comset Semiconductors

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

BSS123,215

Nexperia

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Moisture Sensitivity Level (MSL): 1; No. of Terminals: 3; Maximum Time At Peak Reflow Temperature (s): 30;

Details

LM107H/883C

Rochester Electronics

OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Package Equivalence Code: CAN8,.2;

Details

FDV303N

Fairchild Semiconductor

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Transistor Application: SWITCHING; JESD-609 Code: e3;

Details

ATMEGA328P-AU

Atmel

MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 32; Package Code: TQFP; Package Shape: SQUARE;

Details

B06P-VL Technical Details

TYPE	DESCRIPTION
Other Names:	B06PVL 455-2364
Mixed Contacts:	NO
Mating Contact Finish:	TIN
Filter Feature:	NO
Mating Info.:	MULTIPLE MATING PARTS AVAILABLE
IEC Conformity:	NO
Empty Shell:	NO
Mounting Type:	BOARD
JESD-609 Code:	e3
Total No. of Contacts:	6
MIL Conformity:	NO
Termination Type:	SOLDER
Termination Contact Finish:	Tin (Sn)
Contact Gender:	MALE
Insulator Material:	POLYAMIDE66
Connector Type:	RECTANGULAR POWER CONNECTOR
Contact Material:	COPPER ALLOY
Additional Features:	SHROUDED
Option:	GENERAL PURPOSE
DIN Conformance:	NO
UL Flammability Code:	94V-0

Category Top Products

M300-2240696F2

Harwin Plc

The Harwin PLC M300-2240696F2 is a rectangular power connector with 6 contacts, rated for 10A signal current. It features glass-filled polyamide insulation, operates b/w -65°C to 175°C, and has a durability of 1000 cycles. Ideal for commercial applications requiring reliable power connections.

IPD1-02-S-K-R

Samtec

Samtec's IPD1-02-S-K-R is a RECTANGULAR POWER CONNECTOR with 2 FEMALE contacts. Made of POLYAMIDE66, it uses CRIMP termination and is ideal for CABLE mounting applications.

43650-0415

Molex

The Molex 43650-0415 Power Connector features a mating contact pitch of 0.118", insulation resistance of 1Gohm, and dielectric voltage of 1500VAC. Ideal for board mounting applications with a temperature range from -40 to +105°C, this connector offers durability with 30 cycles and reliability for commercial use.

35151-0410

Molex

The Molex 35151-0410 is a rectangular power connector with 4 contacts, 2 rows, and a mating contact pitch of 0.35". It has an insulation resistance of 100M ohm, operates b/w -40 to 120°C, and uses PBT-POLYESTER insulator material. Ideal for commercial applications requiring wire termination in polarized lock mounting configurations.

39-29-9062

Molex

Molex 39-29-9062 is a rectangular power connector with 6 contacts, rated at 8A signal current. It features a mating contact pitch of 0.165", insulation resistance of 1Gohm, and dielectric voltage withstand of 1500VAC. Ideal for board mounting applications in commercial settings due to its durability and reliability standards meeting CSA and UL requirements.

03-09-1022

Molex

Molex 03-09-1022 is a rectangular power connector with 0.54" x 0.25" x 1.03" dimensions, made of POLYAMIDE material. Featuring UL 94V-2 flammability code, it has 2 contacts for solder termination and straight cable mounting. Ideal for commercial applications requiring reliable male or female connectors with locking option.

1648208-1

TE Connectivity

TE Connectivity's 1648208-1 is a RECTANGULAR POWER CONNECTOR with 29 contacts, rated at 35A and 250V. Insulated with GLASS FILLED POLYETHYLENE, it operates b/w -40 to 105 °C. Ideal for CABLE mounting applications, this connector offers high durability and reliability under commercial standards.

120943-2

TE Connectivity

TE Connectivity's 120943-2 is a rectangular power connector with matte tin finish, rated at 250V and 16A. With glass-filled polyester insulator, it operates b/w -55 to 125°C. Ideal for board mounting applications requiring reliable female contacts in a right-angle receptacle design.

15-06-0060

Molex

Molex 15-06-0060 is a RECTANGULAR POWER CONNECTOR with POLYAMIDE66 insulator material. It has 6 contacts, operates b/w -40 to 105 °C, and offers high insulation resistance of 1G ohm. Ideal for commercial applications requiring reliable power connections in tight spaces.

93445-3101

Molex

The Molex 93445-3101 is a rectangular power connector with dimensions of 0.816" x 0.807" x 2.34". It has an insulator made of glass-filled polyamide and can operate b/w -55°C to 125°C. With a rated current of 13A, it is ideal for applications requiring a female receptacle connector with crimp termination on cables.

IPT1-105-01-S-D

Samtec

Samtec's IPT1-105-01-S-D is a rectangular power connector with 10 contacts, gold mating finish, and liquid crystal polymer insulator. It has a temperature range of -55 to 125°C and UL flammability rating. Ideal for board mounting in commercial applications.

39-30-1042

Molex

Molex 39-30-1042 is a rectangular power connector with 4 contacts, rated at 8A signal current. It features a mating contact pitch of 0.165", insulation resistance of 1Gohm, and dielectric voltage withstand of 1500VAC. Ideal for board mounting applications in commercial settings due to its durability and reliability standards.

43160-2104

Molex

The Molex 43160-2104 is a rectangular power connector with 4 contacts, ideal for board mounting applications. Featuring a dielectric voltage of 5000VAC and insulation resistance of 1Gohm, it ensures reliable power connections. With a temperature range from -40 to 75°C, this durable connector is suitable for commercial use in various electronic devices.

178289-5

TE Connectivity

TE Connectivity's 178289-5 is a RECTANGULAR POWER CONNECTOR with POLYAMIDE insulator, UL 94V-0 flammability rating, and 10 contacts. It operates b/w -55 to 105°C, suitable for power applications at 115/230VAC. The connector has a crimp termination, two loaded rows, and is designed for cable mounting.

1053071202

Molex

RECTANGULAR POWER CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;

1716920204

Molex

RECTANGULAR POWER CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED;

39-01-2180

Molex

Molex 39-01-2180 is a rectangular power connector with 18 contacts, POLYAMIDE66 insulator, and 1500VAC dielectric voltage. It operates b/w -40 to 105°C, suitable for cable mounting applications requiring high insulation resistance and female contact gender.

105313-2203

Molex

Molex 105313-2203 is a rectangular power connector with 3 contacts, featuring tin finish with nickel barrier. Made of liquid crystal polymer, it has UL94V-0 flammability rating and male contact gender. Ideal for board mounting applications requiring solder termination.

1723164312

Molex

The Molex 1723164312 Power Connector features Liquid Crystal Polymer insulator, 12 contacts, and male SQ pin-skt style. With dimensions of 0.956" x 0.533" x 0.732", it is ideal for board mounting applications. Operating b/w -40°C to 105°C, it meets UL standards for flammability (94V-0).

43650-0201

Molex

The Molex 43650-0201 is a rectangular power connector with a mating contact pitch of 0.118". Featuring matte tin over nickel termination, it has a body width of 0.172" and insulator made of glass-filled liquid crystal polymer. Ideal for board mounting applications, this connector offers reliable performance in commercial settings.