Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

52044-2

Manufacturer

TE Connectivity
Manufacturer's Part Number

52044-2
Description

RING TERMINAL; Wire Gauge: 2 AWG; Voltage (Rated): 600 V; Terminal Gender: FEMALE; No. of Ways: 1; Safety Approval: UL;
Datasheet

Datasheet

Not In Stock

Popular Products

FDV304P

Onsemi

The Onsemi FDV304P is a P-CHANNEL FET with 25V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max Drain Current of 0.46A and an Operating Temperature range of -55 to 150 °C. The transistor comes in a PLASTIC/EPOXY package with GULL WING terminals, suitable for surface mount configurations.

Details

2N7002

Telcom Semiconductor

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; JESD-609 Code: e0;

Details

1N4148

Texas Instruments

1N4148 by Texas Instruments is a rectifier diode with max reverse recovery time of 0.004 us and max forward voltage of 1V. Ideal for applications requiring low reverse current such as signal demodulation circuits. Operates at max temp of 200°C, making it suitable for high-temperature environments.

Details

SS495ASP

Micro Switch

The Micro Switch SS495ASP is an analog circuit IC with a supply voltage range of 4.5V to 10.5V, suitable for automotive applications. Its package body material is plastic/epoxy, and it has a rectangular shape with three terminals. Operating temperature ranges from -40°C to 125°C, making it ideal for various automotive sensor and control systems.

Details

USB3320C-EZK-TR

Microchip Technology

Microchip Technology's USB3320C-EZK-TR is a Bus Controller IC with 32 terminals, operating at 1.6-2V. It supports USB bus compatibility, clock frequency up to 60MHz, and CMOS technology. Ideal for applications requiring Universal Serial Bus peripherals in compact designs with low power consumption.

Details

IRLML6401TRPBF

Infineon Technologies

IRLML6401TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 12V DS Breakdown Voltage, 34A IDM, and 0.05ohm RDS(on). With a small outline package style, it operates in an ambient temperature range of -55 to 150 °C.

Details

BSS138LT3G

Onsemi

BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.

Details

1N4148WS

Rugao Dachang Electronic

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SMMBT3904LT1G

Onsemi

SMMBT3904LT1G by Onsemi is a NPN BJT with 3 terminals, 0.3W power dissipation, and 40V max collector-emitter voltage. Ideal for small outline applications requiring a transistor with hFE of at least 30, it operates up to 150°C and has a transition frequency of 300MHz.

Details

MMBT3906LT1G

Onsemi

MMBT3906LT1G by Onsemi is a PNP BJT with VCEsat of 0.4V, hFE of 30, and fT of 250MHz. Ideal for small signal applications in electronics due to its low power dissipation, high transition frequency, and compact SOT-23 package. Suitable for use in temperature-sensitive environments with an operating range from -65°C to 150°C.

Details

2N7002

Zetex Plc

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): 260; Package Shape: RECTANGULAR;

Details

DS18B20Z

Dallas Semiconductor

TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Housing: PLASTIC; Maximum Accuracy (Cel): 0.50;

Details

LL4148

Itt Components

RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .005 us; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Non Repetitive Peak Forward Current: 1 A;

Details

1N4148WS

Sinyork

RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; No. of Elements: 1; Maximum Output Current: .2 A; Config: SINGLE;

Details

1554216002

Molex

WIRE AND CABLE;

Details

LM555CN

National Semiconductor

PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;

Details

BSS138DW-7-F

Diodes Incorporated

BSS138DW-7-F by Diodes Incorporated is a N-channel small signal FET with a min DS breakdown voltage of 50V. It is used for switching applications and operates in enhancement mode. This surface mount transistor has a max drain current of 0.2A and a max power dissipation of 0.2W.

Details

SZNUP2105LT1G

Onsemi

SZNUP2105LT1G by Onsemi is a Transient Suppression Device with 2 elements in a common anode configuration. It has a max non-repetitive peak reverse power dissipation of 350W and breakdown voltage of 29.1V. Ideal for applications requiring bidirectional polarity protection, such as automotive electronics and industrial equipment due to its AEC-Q101 compliance and high clamping voltage of 44V.

Details

FDV304P

Fairchild Semiconductor

P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Moisture Sensitivity Level (MSL): 1; Maximum Drain Current (ID): .46 A;

Details

M39029/58-360

Carlisle Interconnect Technologies

GENERAL CONN ACCESSORY; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; Maximum Operating Temperature: 200 Cel; MIL-Connector Accessory: CONTACT; Terminal Type: CRIMP; MIL Conformity: YES;

Details

52044-2 Technical Details

TYPE	DESCRIPTION
Total Ways:	1
Wire Cross Section:	35 mm²
Terminal Gender:	Female
Product Type:	Ring Terminal
Safety Compliance:	UL
Wire Gauge:	2 AWG
Rated Voltage:	600 V

Category Top Products

1777280

Phoenix Contact

The Phoenix Contact 1777280 is a Barrier Strip Terminal Block with 2.5mm2 wire cross section and rated for 320V voltage and 12A current. It features screw fastening method, suitable for connecting 12 AWG wires in applications requiring CB, CSA, CUL, EAC, UL, VDE safety approvals.

MS25036-108

Amphenol Communications Solutions

RING TERMINAL; Additional Features: MATERIAL: POLYAMIDE; Wire Gauge: 14 AWG; Voltage (Rated): 600 V; Safety Approval: CSA; MIL; UL; Wire Cross Section: 2.08 mm2;

D-436-36CS391

TE Connectivity

SPLICE TERMINAL; Wire Gauge: 20 AWG; Safety Approval: UL; Wire Cross Section: .61 mm2;

190730170

Molex

RING TERMINAL; Wire Gauge: 10 AWG; Manufacturer Series: 19073; Wire Cross Section: 6 mm2;

MS25036-154

Defense Logistics Agency

RING TERMINAL; Additional Features: NYLON; Wire Gauge: 14 AWG; Voltage (Rated): 300 V; No. of Ways: 1; Wire Cross Section: 2 mm2;

MS25036-111

Amphenol Communications Solutions

RING TERMINAL; Additional Features: NYLON; Wire Gauge: 10 AWG; Voltage (Rated): 600 V; Wire Cross Section: 6 mm2; Safety Approval: CSA; UL;

2060-402/998-404

Wago

Wago's 2060-402/998-404 is a BARRIER STRIP TERMINAL BLOCK for BOARD mounting. It has a rated voltage of 320V, current of 9A, and supports wire gauge up to 18 AWG. Ideal for applications requiring secure electrical connections in limited space.

1935161

Phoenix Contact

Phoenix Contact 1935161 is a UL-approved barrier strip terminal block for BOARD mounting. With a rated voltage of 250V, it supports wire gauge up to 14 AWG and current up to 17.5A. Ideal for applications requiring secure connections in industrial control systems.

2002-2211/1000-410

Wago

MODULAR TERMINAL BLOCK;

1019700000

Weidmueller & Kg

The Weidmueller & Kg 1019700000 is a modular terminal block with C RAIL mounting. It has UL, CSA, CE safety approvals and supports wire gauge up to 2 AWG. With a rated voltage of 1000V and current of 8A, it accommodates wire cross sections up to 120 mm2. Ideal for applications requiring secure connections in industrial settings.

MKDSN1,5/3-5,08

Phoenix Contact

The Phoenix Contact MKDSN1,5/3-5,08 is a barrier strip terminal block with 3 ways and rated for 13.5A current at 400V voltage. It features a fastening method using screws and accepts wire gauge up to 16 AWG. Ideal for board mounting applications, it holds safety approvals from CB, CUL, DNVGL, EAC, SEV, and UL.

MS-25036-101

Molex

RING TERMINAL; Wire Gauge: 16 AWG; Voltage (Rated): 300 V; No. of Ways: 1; Safety Approval: UL; Wire Cross Section: 1.42 mm2;

54110

Abb Installation Products

LUG TERMINAL; Wire Gauge: 0 AWG; Terminal Gender: FEMALE;

1-796634-2

TE Connectivity

TE Connectivity 1-796634-2 is a UL-approved strip terminal block with 12 ways, rated for 15A current and 300V voltage. It accommodates 12 AWG wire gauge with a cross-section of 3mm², mounted via screws on cables. Ideal for various applications requiring secure electrical connections.

1546670-3

TE Connectivity

TE Connectivity's 1546670-3 is a Barrier Strip Terminal Block with 2 rows, UL safety approval, and rated for 25A current. Ideal for panel mounting applications, it accommodates 14 AWG wires with a voltage rating of 300V.

2-320563-4

TE Connectivity

TE Connectivity 2-320563-4 is a UL-approved FEMALE RING TERMINAL for 14 AWG wire with a rated voltage of 300V. Featuring a wire cross section of 2.15 mm2, it is ideal for various applications in Terminals & Terminal Blocks category.

34130

Tyco Electronics Amp

BUTT TERMINAL; Wire Gauge: 16 AWG; Wire Cross Section: 1.65 mm2; Terminal Gender: FEMALE;

64323-1029

Molex

FORK TERMINAL; Wire Gauge: 18 AWG; Terminal Gender: FEMALE; Wire Cross Section: 1 mm2;

191600083

Molex

SPLICE TERMINAL; Terminal Gender: FEMALE;

302

Marathon Special Products

302 by Marathon Special Products is a UL-approved BARRIER STRIP TERMINAL BLOCK with 2 rows, rated for 30A current and 600V voltage. It features PANEL mounting and SCREW fastening, suitable for applications requiring secure electrical connections with 10 AWG wire gauge.