Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

44A0111-28-0

Manufacturer

TE Connectivity
Manufacturer's Part Number

44A0111-28-0
Description

WIRE AND CABLE; Rated Voltage: 600 V; Shielding: NO; Construction: STRANDED; Stranding: 7X36; MIL Conformity: NO;
Datasheet

Datasheet

Not In Stock

Popular Products

BAV99

Microsemi

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BAV99LT1G

Onsemi

BAV99LT1G by Onsemi is a series connected diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.006 us and can handle up to 100V repetitive peak reverse voltage. Ideal for rectification applications, this diode operates b/w -65°C to 150°C temperature range.

Details

BAV99

SPC TECHNOLOGY/ MULTICOMP

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N7002

Diodes Incorporated

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Form: GULL WING; JESD-30 Code: R-PDSO-G3;

Details

STM32H753IIT6

STMicroelectronics

STM32H753IIT6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs and 2-Ch 12-Bit DACs, suitable for industrial applications requiring high-speed data processing and connectivity via CAN, ETHERNET, USB, and more.

Details

LL4148

Kec

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

BSS138LT3G

Onsemi

BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.

Details

BAV99

Sprague Electric

RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1.3 V; Maximum Output Current: .1 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel;

Details

LM358N

Silicon Group

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

EPCS4SI8N

Intel

EPCS4SI8N by Intel is a small outline flash memory with 512Kx8 organization, operating at 3.3V. It features a max clock frequency of 40MHz and endurance of 100k write/erase cycles. Ideal for industrial applications requiring configuration memory with serial interface and low standby current consumption.

Details

ULN2803A

STMicroelectronics

NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; No. of Elements: 8; Minimum DC Current Gain (hFE): 1000;

Details

M24308/2-1F

Cristek Interconnects

D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Rows Loaded: 2; Shell Size: 1/E; Filter Feature: NO;

Details

BSS138-7-F

Diodes Incorporated

Diodes Inc. BSS138-7-F is a N-channel FET with 50V DS breakdown voltage, 0.2A max drain current, and 3.5 ohm RDS(on). Ideal for switching applications in small outline packages with matte tin finish, operating up to 150°C peak reflow temp.

Details

1552200168

Molex

WIRE AND CABLE;

Details

BAV99

Kec

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

M39029/56-351

TE Connectivity

TE Connectivity's M39029/56-351 is a CRIMP contact type backshell accessory with rated voltage of 115V. It operates b/w -65 to 175 °C, suitable for MIL-C-39029/56 connectors with wire gauge ranging from 28 to 22 AWG. Ideal for military applications requiring female contacts and copper alloy material.

Details

2N7002DWH6327XTSA1

Infineon Technologies

2N7002DWH6327XTSA1 by Infineon: N-CHANNEL FET with 60V DS Breakdown Voltage, 0.3A ID, and 3ohm RDS. Ideal for SWITCHING applications in small outline packages with GULL WING terminals.

Details

LM7805CT

Comset Semiconductors

Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Min): 0 Cel; Technology: BIPOLAR;

Details

BSS138LT1G

Onsemi

BSS138LT1G by Onsemi is a N-CHANNEL FET with 50V DS Breakdown Voltage, 0.2A Drain Current, and 3.5 ohm On Resistance. Ideal for SWITCHING applications due to its ENHANCEMENT MODE operation and built-in DIODE. Operates b/w -55 to 150 °C with small outline package style for surface mount assembly.

Details

RC0603FR-071KL

Yageo

Yageo's RC0603FR-071KL is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in electronics, it operates b/w -55 to 155 °C with a temperature coefficient of 100 ppm/°C.

Details

44A0111-28-0 Technical Details

TYPE	DESCRIPTION
Wire Gauge (AWG):	28
Construction:	STRANDED
Maximum Wire Size:	28 AWG
IEC Conformity:	NO
Shielding:	NO
Minimum Operating Temperature:	-65 Cel
Rated Voltage:	600 V
Cross Section Area:	.089 mm2
Conductor Finish:	TIN
MIL Conformity:	NO
Wire & Cable Name:	FLEXIBLE CORD AND FIXTURE WIRE
Connector Accessory Type:	WIRE AND CABLE
No. of Conductors:	1
Conductor Material:	COPPER ALLOY
Maximum Operating Temperature:	150 Cel
Application:	GENERAL PURPOSE, LIGHTWEIGHT
DIN Conformity:	NO
Stranding:	7X36
Diameter:	.76 mm
Cable Types:	SPEC 44

Category Top Products

M22759/11-22-0

Belden

Belden's M22759/11-22-0 wire is MIL-W-22759 approved with 600V rating, suitable for internal wiring in electronics. Features silver-coated copper alloy conductor, PTFE insulation, and can operate up to 200°C. Stranded construction with 19X34 stranding and 0.326 mm2 cross-section area make it a flexible cord and fixture wire choice.

22759/32-20-3

TE Connectivity

TE Connectivity's 22759/32-20-3 wire is a flexible cord with 600V rating, TIN finish, and copper alloy conductor. It operates b/w -65 to 150°C, has 20 AWG gauge, and conforms to MIL-DTL-22759 standards. Ideal for various electrical applications requiring durable and reliable wiring solutions.

C3365/10

3m Electronic Products Division

3m Electronic Products Division's C3365/10 is a 300V rated flat flexible cable with 10 conductors. Featuring tinned copper conductor material and PVC insulation, it has approvals from CUL and UL. Ideal for applications requiring a temperature range of -20 to 105°C.

65503320815301

Wuerth Elektronik & Kg

CABLE ASSEMBLY;

5502FE0081000

Belden

WIRE AND CABLE;

CS-DSDMDB09MF-003

Amphenol

CABLE ASSEMBLY;

12814

Helukabel

Helukabel 12814 is a CONTROL CABLE with 5 STRANDED BARE COPPER conductors, rated at 600V. It has CE, CSA, UL approvals and a POLYURETHANE jacket. Suitable for applications like conveyor belts and tooling machines, it operates b/w -40 to 80°C temperatures.

3049BK001

Alpha Wire

3049BK001 by Alpha Wire is a stranded electrical wire with a rated voltage of 300V. It has a conductor made of copper alloy and an insulator made of PVC. This flexible cord and fixture wire is suitable for applications requiring a temperature range of -40 to 105°C.

34105

Helukabel

WIRE AND CABLE; Rated Voltage: 225 V; Shielding: NO; Wire & Cable Name: COMMUNICATION CABLE; IEC Conformity: NO; Diameter: 17.5 mm;

PXP6040/A/3M00

Bulgin

The Bulgin PXP6040/A/3M00 is a UL-approved communication cable with PVC jacket, 4 conductors, and USB A male to USB B male connectors. It has a rated voltage of 30V, current of 1A, and operates b/w 0-70°C. Ideal for data transfer applications requiring a compact 0.08mm2 cross-section area.

P568-010

Tripp Lite

CABLE ASSEMBLY;

135111-03-M0.25

Amphenol

CABLE ASSEMBLY;

282598-002

TE Connectivity

TE Connectivity's 282598-002 wire is a flexible cord with 16 AWG copper alloy conductor, rated for 600V. With a temperature range of -65 to 150°C, it is ideal for electrical applications requiring durable wiring solutions. The cable type SPEC 44 ensures reliable performance in various environments.

M22759/16-20-9

Helistrand

WIRE AND CABLE; Rated Voltage: 600 V; Shielding: NO; Conductor Finish: TIN; Insulator Material: EXTRUDED ETFE; Approvals (V): MIL-W-22759;

107-1

Standard Wire & Cable

Standard Wire & Cable's 107-1 is a MIL-approved stranded wire with nylon jacket, rated at 600V. Featuring tin-finished copper conductor, PVC insulator, and operating temp of 105°C. Ideal for applications requiring flexible cord and fixture wire in various industries.

982670431

Molex

CABLE ASSEMBLY; Shielding: NO; No. of Conductors: 26;

2038000026

Molex

CABLE ASSEMBLY;

82A0111-26-9

TE Connectivity

TE Connectivity's 82A0111-26-9 is a SINGLE WALL cable with 600V rating, TIN finish, and COPPER ALLOY conductor. With -65 to 150 °C operating range, it's ideal for FLEXIBLE CORD AND FIXTURE WIRE applications requiring 26 AWG wire gauge and SPEC 80 cable types.

44A0111-20-2

TE Connectivity

TE Connectivity's 44A0111-20-2 cable is a stranded wire with 600V rating, TIN finish, and 20 AWG gauge. Ideal for general purpose applications, it has a temperature range of -65 to 150°C. This flexible cord and fixture wire features copper alloy conductor material and is part of the SPEC 44 cable types.

29125

Helukabel

WIRE AND CABLE;