Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

175101-22-24.00

Manufacturer

Amphenol
Manufacturer's Part Number

175101-22-24.00
Description

CABLE ASSEMBLY;
Datasheet

Datasheet

Not In Stock

Popular Products

FDV304P

Fairchild Semiconductor

P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Moisture Sensitivity Level (MSL): 1; Maximum Drain Current (ID): .46 A;

Details

LM317T

Onsemi

ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-PSFM-T3; Adjustability: ADJUSTABLE; Package Equivalence Code: SIP3,.1TB;

Details

OPA2277UA/2K5

Texas Instruments

OPA2277UA/2K5 by Texas Instruments is a dual operational amplifier with low offset voltage of 100 uV and micropower consumption of 0.004 uA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1 MHz. With a compact rectangular package style, it is suitable for surface mount designs in various electronic systems.

Details

MBR0520LT1G

Onsemi

MBR0520LT1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, has a peak reflow temperature of 260°C, and a repetitive peak reverse voltage of 20V. This diode is ideal for applications requiring high-speed switching in compact electronic devices.

Details

BSS138-TP

Micro Commercial Components

BSS138-TP by Micro Commercial Components is a N-channel small signal FET with a min DS breakdown voltage of 50V and max drain current of 0.22A. It is commonly used in applications requiring enhancement mode operation, such as power management and switching circuits.

Details

2N2222A

Swampscott Electronics

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

2N7002

NXP Semiconductors

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; JESD-609 Code: e3; Minimum DS Breakdown Voltage: 60 V;

Details

1N5819HW-7-F

Diodes Incorporated

1N5819HW-7-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 1A output current, and 0.75V forward voltage. It's a surface mount device in a small outline package ideal for efficiency applications at temperatures ranging from -65 to 125°C.

Details

MMSZ5245BT1G

Onsemi

MMSZ5245BT1G by Onsemi is a Zener diode with 15V nominal reference voltage, 8.5mA test current, and 16 ohm dynamic impedance. It is used in applications requiring precise voltage regulation in a compact SMD package for temperatures ranging from -55 to 150°C.

Details

LL4148

Vishay Telefunken

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

2N2222A

NXP Semiconductors

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Operating Temperature: 150 Cel;

Details

LM358AN

Samsung

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

LM358AN

Fairchild Semiconductor

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

1N4148

Weitronic Enterprise

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

M24308/2-1F

Souriau

D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Body or Shell Style: RECEPTACLE; MIL Conformity: YES;

Details

2N7002

Promax-johnton

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Terminal Form: GULL WING; Maximum Drain-Source On Resistance: 7.5 ohm; Minimum DS Breakdown Voltage: 60 V;

Details

2N2222A

Cobham Plc

NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 100; Maximum Turn Off Time (toff): 300 ns;

Details

CGA3E2X7R1H104K080AA

TDK

CGA3E2X7R1H104K080AA by TDK is a fixed ceramic capacitor with a capacitance of 0.1 uF and a rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate at temperatures ranging from -55 to 125 °C. This capacitor is commonly used in surface mount applications for various electronic devices.

Details

BSS138-7-F

SPC TECHNOLOGY/ MULTICOMP

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain Current (ID): .2 A; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;

Details

CRGCQ0805F10K

TE Connectivity

TE Connectivity's CRGCQ0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance.

Details

175101-22-24.00 Technical Details

TYPE	DESCRIPTION
Connector Accessory Type:	CABLE ASSEMBLY

Category Top Products

44A0111-22-900

TE Connectivity

TE Connectivity's 44A0111-22-900 is a MIL-W-81044 approved wire with 600V rating, suitable for applications requiring flexible cord and fixture wire. Featuring radiation-crosslinked PVF jacket, tin finish conductor, and copper alloy material, it operates b/w -65 to 135 °C with resistance of 0.053 ohm.

3365/16SF

3m Electronic Products Division

3m Electronic Products Division's 3365/16SF is a UL-approved FLAT FLEXIBLE CABLE with 16 conductors of STRANDED TINNED COPPER. It has a rated voltage of 300V, operating from -20 to 105°C, making it ideal for electrical wiring applications.

245106-02-06.00

Amphenol

CABLE ASSEMBLY;

TC2030-IDC-NL

Tag-connect

CABLE ASSEMBLY; Connector Side-1: TAG6PIN; Connector Side-2: IDC; Shielding: NO; Additional Features: PLUG-OF-NAILS;

24231

Helukabel

Helukabel 24231 is a CE, DIN, EAC, EN, VDE approved CONTROL CABLE with STRANDED construction and THERMOPLASTIC ELASTOMER jacket. It has 4 COPPER ALLOY conductors with POLYPROPYLENE insulation suitable for -40 to 80 °C environments. Ideal for various applications including dry, moist, and wet installations.

227003-01

Qualtek Electronics

CABLE ASSEMBLY;

44A0111-28-905

TE Connectivity

TE Connectivity's 44A0111-28-905 is a flexible cord with copper alloy conductor, rated for 600V. Featuring PVDF insulation and TIN finish, it operates b/w -65°C to 135°C. Ideal for various electrical applications requiring a max wire size of 0 AWG.

34160

Helukabel

WIRE AND CABLE; Rated Voltage: 225 V; Shielding: YES; Diameter: 13 mm; Maximum Operating Temperature: 70 Cel; Cross Section Area: .8 mm2;

52197

Helukabel

WIRE AND CABLE; Rated Voltage: 300 V; Shielding: YES; Wire Gauge (AWG): 24; Approvals (V): DNV GL; EAC; Insulator Material: CROSS-LINKED POLYOLEFIN-COPOLYMER;

687980002

Molex

Molex 687980002 is a PVC jacketed cable assembly with shielding, rated for 30V and 3A. It features USB 2.0 C MALE connectors on both sides and has 22 conductors. This cable is commonly used in electrical applications requiring reliable data transfer.

44A0111-28-9

TE Connectivity

TE Connectivity's 44A0111-28-9 is a stranded electrical wire with a rated voltage of 600V. It features a tin conductor finish and PVDF insulator material, making it suitable for use in flexible cord and fixture applications. With a max operating temperature of 150°C and min operating temperature of -65°C, this wire is designed to withstand extreme conditions.

415-0043-MM250

Bel Fuse

CABLE ASSEMBLY;

F9TSPXNXNSNF045

Panduit

CABLE ASSEMBLY;

M22759/43-22-9

Allied Wire & Cable

WIRE AND CABLE; Rated Voltage: 600 V; Shielding: NO; No. of Conductors: 1; Approvals (V): MIL; Stranding: 19X34;

M22759/11-22-5

Harbour Industries

WIRE AND CABLE; Rated Voltage: 600 V; Shielding: NO; Cross Section Area: .326 mm2; Diameter: 1.245 mm; Maximum Operating Temperature: 200 Cel;

1552100002

Molex

WIRE AND CABLE;

151670365

Molex

Molex 151670365 flat cable with 20 conductors, UL approval, rated for 60V & 0.5A. Constructed with tin-finished copper alloy conductor and polyester insulator. Ideal for electrical wiring applications requiring -40 to 105 °C operating temperature range.

1-971111-3

TE Connectivity

TE Connectivity's 1-971111-3 is a flat ribbon cable with 10 conductors, rated at 300V. Featuring tinned copper conductor material and PVC insulation, it operates b/w -20°C to 105°C. Ideal for electrical wiring applications requiring flexibility and durability.

45134

Helukabel

Helukabel 45134 is a CE-approved stranded flat cable with PVC jacket and tin finish. It has 20 conductors, each made of copper alloy with 0.09 mm2 cross-section area. Ideal for quick IDC connections, it operates b/w -20 to 80 °C, making it versatile for various electrical applications.

982660193

Molex

Molex 982660193 flat cable with UL approval, rated for 60V, features tin finish copper alloy conductor. Suitable for applications requiring -40 to 105 °C operating temperature range, 0.03 mm2 cross section area, and 0.73 ohm resistance.