Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

320561

Manufacturer

TE Connectivity
Manufacturer's Part Number

320561
Description

RING TERMINAL; Wire Gauge: 14 AWG; Voltage (Rated): 300 V; Terminal Gender: FEMALE; Safety Approval: UL; Wire Cross Section: 2 mm2;
Datasheet

Datasheet

Not In Stock

Popular Products

SS14

Goodwork Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

OPA2227UA

Texas Instruments

OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.

Details

M24308/2-1F

Amphenol

D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: RECEPTACLE; Body Length: 1.228 inch; No. of Rows Loaded: 2;

Details

CSNF651

Honeywell Sensing And Control

CSNF651 by Honeywell Sensing And Control is an industrial-grade analog circuit with 3 terminals. It operates b/w -40 to 85°C, supporting supply voltages from -15V to 15V. Ideal for applications requiring a special shape rectangular package style and through-hole terminal form.

Details

2N2222A

Micro Electronics

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

1N4148

Shandong Yiguang Electronic Joint Stock

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

BSS84-7-F

SPC TECHNOLOGY/ MULTICOMP

P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Transistor Element Material: SILICON;

Details

1N4148

Surge Components

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

SMBJ18CA

Shenzhen Socay Electronics

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BSS138BK,215

NXP Semiconductors

NXP Semiconductors' BSS138BK,215 is a N-CHANNEL FET with 0.36A max drain current and 0.42W power dissipation. Ideal for applications requiring single configuration and surface mount technology, such as enhancement mode operation in temperatures up to 150°C.

Details

BSS138

Infineon Technologies

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain Current (Abs) (ID): .2 A; Maximum Feedback Capacitance (Crss): 8 pF;

Details

1N4148

Dc Components

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

2N2222A

Tesla Elektronicke Soucastky

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

SS14

Hitano Enterprise

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

M24308/2-1F

Souriau-sunbank Connection Technologies

D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body Length: 1.228 inch; Mounting Type: CABLE AND PANEL; Termination Type: CRIMP;

Details

1N4148WS

Meritek Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148WS

Dc Components

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LL4148

Transys Electronics

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

BAV99

MICRODIODE ELECTRONICS SHENZHEN CO LTD

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SS14

Surge Components

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

320561 Technical Details

TYPE	DESCRIPTION
Other Names:	-500-095-0000-SI 2266-320561 -500-095-0000-SI-ND -320561-SI -500-95-0-SI-ND -500-95-0-SI 320561-ND A27253
Total Ways:	1
Wire Cross Section:	2 mm²
Terminal Gender:	Female
Product Type:	Ring Terminal
Safety Compliance:	UL
Wire Gauge:	14 AWG
Rated Voltage:	300 V

Category Top Products

34130

TE Connectivity

BUTT TERMINAL; Wire Gauge: 16 AWG; Terminal Gender: FEMALE; Safety Approval: UL; Wire Cross Section: 1.42 mm2;

3571

Keystone Electronics

TAB TERMINAL;

640905-1

TE Connectivity

TE Connectivity 640905-1 is a female push-on terminal with UL approval for 14 AWG wire, rated at 300V. Ideal for applications requiring secure electrical connections in terminals and terminal blocks.

1729144

Phoenix Contact

Phoenix Contact 1729144 is a BARRIER STRIP TERMINAL BLOCK with 4 ways, rated for 13.5A current and 400V voltage. It uses SCREW fastening method and supports wire gauge up to 16 AWG. Ideal for BOARD mounting, it has safety approvals like CB, CCA, CSA, CUL, EAC, GL.

35109

TE Connectivity

TE Connectivity 35109 is a UL-approved FEMALE RING TERMINAL for 10 AWG wire with a rated voltage of 300V. Featuring a wire cross section of 6.64 mm2, it is ideal for electrical connections in various applications requiring secure and reliable terminal blocks.

221-612

Wago

The Wago 221-612 Barrier Strip Terminal Block is rated for 600V and 30A, accommodating wire gauge up to 10 AWG. With safety approvals from CUL, EN, IEC, KEMA, KEUR, and UL, it's ideal for applications requiring a secure connection with its spring-loaded fastening method. Suitable for use in various industries due to its versatility and reliability.

8-33466-3

TE Connectivity

RING TERMINAL; Wire Gauge: 6 AWG; Wire Cross Section: 15 mm2; Terminal Gender: FEMALE; No. of Ways: 1; Safety Approval: UL;

1777086

Phoenix Contact

Phoenix Contact 1777086 is a STRIP TERMINAL BLOCK with 3 ways, rated for 12A current and 320V voltage. It supports wire gauge up to 13 AWG and wire cross section of 2.5 mm2. Ideal for BOARD mounting, it holds safety approvals like CB, CCA, CSA, CUL, EAC, GL, RS.

DRA1-CMXE100D10

Crydom

The Crydom DRA1-CMXE100D10 is a modular terminal block with 4 ways and a rated voltage of 100V. It is mounted on DIN rail and has a fastening method using screws. With a safety approval from CE and UL, it is suitable for various applications in the field of terminals and terminal blocks.

D-436-36CS391

TE Connectivity

SPLICE TERMINAL; Wire Gauge: 20 AWG; Safety Approval: UL; Wire Cross Section: .61 mm2;

3522

Molex

TAB TERMINAL;

39-00-0074

Molex

WIRE TERMINAL; Wire Gauge: 18 AWG; Terminal Gender: FEMALE; Manufacturer Series: 5556;

173

Zierick Manufacturing

LUG TERMINAL;

MC1,5/2-ST-3.81

Phoenix Contact

The Phoenix Contact MC1,5/2-ST-3.81 is a 2-way barrier strip terminal block with a rated voltage of 160V and current of 8A. It supports wire gauge up to 16 AWG and wire cross-section of 1.5mm², making it ideal for various connector applications requiring CB, CSA, CUL, EAC, UL, and VDE safety approvals.

1715734

Phoenix Contact

The Phoenix Contact 1715734 is a modular terminal block with a rated voltage of 400V and current of 17.5A, suitable for wire gauge up to 14 AWG. It has safety approvals from CCA, CSA, CUL, GOST, SEV, and UL. This board-mounted terminal block offers fastening via screws and supports wire cross-sections of 1.5mm2 in applications requiring a reliable electrical connection in industrial settings.

33466

Weidmueller & Kg

RING TERMINAL; Wire Gauge: 6 AWG; Safety Approval: UL; No. of Ways: 1; Wire Cross Section: 16.8 mm2; Terminal Gender: FEMALE;

2-36932-2

TE Connectivity

RING TERMINAL; Safety Approval: UL; Wire Cross Section: 117 mm2; Terminal Gender: FEMALE; No. of Ways: 1;

2-34173-1

Tyco Electronics Amp

RING TERMINAL; Wire Gauge: 10 AWG; Voltage (Rated): 600 V; No. of Ways: 1; Wire Cross Section: 6 mm2; Safety Approval: UL;

1-796634-2

Tyco Electronics Amp

STRIP TERMINAL BLOCK; Mounting Type: CABLE; Fastening Method: SCREW; Additional Features: STANDARDS: IEC 998-1/998-2-1, PA 6-6, 94V-0, POLARIZED; Wire Gauge: 12 AWG; Voltage (Rated): 300 V;

1757019

Phoenix Contact

The Phoenix Contact 1757019 is a Barrier Strip Terminal Block with UL and CSA safety approvals. It supports wire gauge up to 12 AWG and rated voltage of 250V, making it ideal for industrial applications requiring secure connections. With a current rating of 12A and fastening method via connector, it offers reliable performance in various electrical setups.