Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

1SET111008R0000

Manufacturer

TE Connectivity
Manufacturer's Part Number

1SET111008R0000
Description

TERMINAL BLOCK ACCESSORY; Maximum Operating Temperature: 105 Cel; Wire Gauge (AWG): 16; Insulator Material: POLYPROPYLENE; Cable Types: DISCRETE WIRE; Maximum Wire Size: 16 AWG;
Datasheet

Datasheet

Not In Stock

Popular Products

CRG0805F10R

Tyco Electronics Components

FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;

Details

BSS138

Zetex Plc

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Style (Meter): SMALL OUTLINE; Maximum Operating Temperature: 150 Cel;

Details

1N4148WT

Onsemi

1N4148WT by Onsemi is a single rectifier diode with a max output current of 0.3A and forward voltage of 0.72V. It has a small outline package style, matte tin terminal finish, and operates at temperatures up to 150°C. Ideal for applications requiring fast reverse recovery time such as power supplies and signal demodulation circuits.

Details

SMBJ18CA

Vishay Semiconductors

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

FT232RL-TUBE

FTDI

FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.

Details

LM358M

Raytheon Semiconductor

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

Details

LM317LMX/NOPB

National Semiconductor

ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Seated Height: 1.75 mm; Nominal Dropout Voltage-1: 3 V;

Details

MBR130T1G

Onsemi

MBR130T1G by Onsemi is a Schottky rectifier diode with max output current of 1A and max repetitive peak reverse voltage of 30V. It operates b/w -65 to 125°C, suitable for surface mount applications in electronics requiring low forward voltage drop.

Details

1N4148WS

Continental Device India

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N7002

Sinyork

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Operating Temperature: 85 Cel; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Operating Mode: ENHANCEMENT MODE;

Details

LL4148-GS08

Vishay Intertechnology

The Vishay Intertechnology LL4148-GS08 is a glass diode with fast recovery time of 0.008 us and max reverse current of 5 uA. Ideal for applications requiring rectification, it has a breakdown voltage of 100 V and can handle a peak forward current of 2 A.

Details

M39029/56-351

Amphenol

CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Additional Features: STANDARD: MIL-DTL-38999; Contact Gender: FEMALE; MIL-Connector Accessory Name: CONTACT; Associated Military - Specifications: MIL-DTL-38999;

Details

SS14

General Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N7002

Rectron

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel; Terminal Form: GULL WING;

Details

2N7002

Micro Commercial Components

Small Signal Field-Effect Transistors; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .34 A; Package Style (Meter): SMALL OUTLINE;

Details

LL4148

Semtech Electronics

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

2N2222A

Shanghai Lunsure Electronic Technology

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;

Details

L7805CV

STMicroelectronics

L7805CV by STMicroelectronics is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in electronic circuits.

Details

1N4148

Semiconductors

RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Config: SINGLE; No. of Phases: 1; No. of Elements: 1;

Details

LL4148

Bkc Semiconductors

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

1SET111008R0000 Technical Details

TYPE	DESCRIPTION
Mounting Style:	STRAIGHT
Wire Gauge (AWG):	16
Construction:	STRANDED
Maximum Wire Size:	16 AWG
Connector Accessory Type:	TERMINAL BLOCK ACCESSORY
Insulator Material:	POLYPROPYLENE
Maximum Operating Temperature:	105 Cel
Cable Types:	DISCRETE WIRE

Category Top Products

08-70-1039

Molex

The Molex 08-70-1039 is a crimp terminal contact with chain design, suitable for wire sizes ranging from 28 AWG to 22 AWG. It has a min cable entry of 0.0452" and max cable entry of 0.0748", ideal for applications requiring female contacts in straight mounting style.

3026049

Phoenix Contact

TERMINAL BLOCK ACCESSORY; Manufacturer Series: 3026049;

50058-8100

Molex

The Molex 50058-8100 is a bellowed contact assembly product with phosphor bronze material. It features crimp terminal type, 0.02" min cable entry, and 0.039" max cable entry. Ideal for use with 51021 housing, this female contact accommodates wire sizes from 32 to 28 AWG.

1-968855-1

TE Connectivity

TE Connectivity's 1-968855-1 is a CRIMP terminal with stamped contact design. It supports wire gauge from 20 to 17 AWG, rated for 15A current. Ideal for power applications, it has a temperature range of -40 to 130°C and accommodates cables from 0.051" to 0.083".

7816.6557.0

Molex

CONNECTOR ACCESSORY;

1-66101-9

TE Connectivity

TE Connectivity's 1-66101-9 is a crimp terminal contact designed for CPC/G Series/M Series connectors. With a finish thickness of 100, it can handle wire gauges ranging from 16 AWG to 18 AWG and has a rated current of 13 A. This connector accessory is made of brass and is suitable for power and signal applications.

5-1393561-7

TE Connectivity

CONNECTOR ACCESSORY; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG;

AT62-201-16141

Amphenol

CONNECTOR ACCESSORY;

DF11-2428SCA

Hirose Electric

DF11-2428SCA by Hirose Electric is a crimp terminal connector with 2A rated current, suitable for 28-24 AWG wires. It has a contact resistance of 30 mohm and operates b/w -40 to 85 °C. Ideal for DF11 Series applications, it features female contacts and phosphor bronze material in a straight mounting style.

AWM-2S

Amphenol

CONNECTOR ACCESSORY;

16-02-0078

Molex

CONNECTOR ACCESSORY;

1-66741-1

TE Connectivity

TE Connectivity 1-66741-1 is a CRIMP terminal for CPC/G and M SERIES connectors. With a wire gauge of 10 AWG, it supports up to 35A current rating. Made of copper alloy, it is designed for power applications with female contact gender in right angle mounting style.

1SNK150051R0000

TE Connectivity

TERMINAL BLOCK ACCESSORY; Mounting Style: RIGHT ANGLE; Insulator Material: POLYAMIDE; Maximum Wire Size: 0 AWG; Minimum Operating Temperature: -55 Cel; Maximum Operating Temperature: 110 Cel;

3-2198617-7

TE Connectivity

TE Connectivity 3-2198617-7 backshell has 4 shell sizes with shielding. It supports up to 0 AWG wire size, made of ABS material. Mounting options include #4-40 screw for various applications in Assembly Products category.

13663718

Delphi Connection Systems

CONNECTOR ACCESSORY;

16-02-0115

Molex

Molex 16-02-0115 CONTACT features CRIMP terminals, suitable for 24-22 AWG wires. With a rated current of 3A and contact resistance of 15 mohm, it is ideal for applications requiring male connectors with SQUARE PIN-SOCKET style contacts. Operating temperature ranges from -40 to 120 °C.

35021-1160

Molex

Molex 35021-1160 CONTACT features CRIMP terminal type, PHOSPHOR BRONZE material, and RIGHT ANGLE mounting style. Ideal for use with 35022-00, 35023-00, and 68418 assemblies. Supports wire sizes from 28 AWG to 22 AWG with a 0.074 inch cable entry.

16-02-0083

Molex

Molex 16-02-0083 is a CRIMP CONTACT for 24-30 AWG wires, FEMALE gender, SQUARE PIN-SOCKET style. Used in Assembly Products with STRAIGHT mounting style for various applications.

0462-005-20141

TE Connectivity

TE Connectivity's 0462-005-20141 is a CRIMP terminal with MACHINED contact design. It supports wire gauge up to 16 AWG, rated for 7.5A current. Ideal for applications requiring FEMALE contact gender and ROUND PIN-SOCKET style in straight mounting setup.

175218-2

TE Connectivity

TE Connectivity's 175218-2 is a CRIMP terminal with GLASS FILLED POLYESTER insulator. With a rated current of 15A, it supports wire gauge from 20 to 16 AWG. Ideal for POWER AND SIGNAL applications, it features CSA and UL approvals.