Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

W2S-P012

Manufacturer

TE Connectivity
Manufacturer's Part Number

W2S-P012
Description

CONNECTOR ACCESSORY; MIL Conformity: NO; DIN Conformity: NO; Usage: DT SERIES; Design: POWER AND SIGNAL; Maximum Operating Temperature: 125 Cel;
Datasheet

Datasheet

Not In Stock

Popular Products

C0805C104K5RACTU

KEMET Corporation

KEMET C0805C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and reliable performance.

Details

ULN2803A

STMicroelectronics

NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; No. of Elements: 8; Minimum DC Current Gain (hFE): 1000;

Details

2N2222A

Baneasa S A

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; Qualification: Not Qualified;

Details

LL4148

Silicon Standard

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

LL4148

Semtech Electronics

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

2N2222A

Telcom Semiconductor

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

ST3485EBDR

STMicroelectronics

ST3485EBDR by STMicroelectronics is a Line Driver & Receiver with 3.3V power supply, EIA-422/EIA-485 interface standard, and 30ns max transmit delay. It is ideal for industrial applications requiring differential output and operates in temperatures ranging from -40 to 85°C.

Details

LM317T

Micro Commercial Components

ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Moisture Sensitivity Level (MSL): 1; Maximum Output Current-1: 1.5 A; Operating Temperature (TJ-Min): 0 Cel;

Details

MMSZ5245BT1G

Onsemi

MMSZ5245BT1G by Onsemi is a Zener diode with 15V nominal reference voltage, 8.5mA test current, and 16 ohm dynamic impedance. It is used in applications requiring precise voltage regulation in a compact SMD package for temperatures ranging from -55 to 150°C.

Details

BSS123NH6327XTSA1

Infineon Technologies

Infineon BSS123NH6327XTSA1 is a N-CHANNEL FET with 100V DS breakdown voltage, 0.19A ID, and 6 ohm RDS(on). Ideal for small outline applications requiring high drain current and low on-resistance. AEC-Q101 compliant for automotive use.

Details

DS18B20+

Maxim Integrated

TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Package Shape or Style: RECTANGULAR; Maximum Operating Current: 1.5 mA; Package Equivalence Code: SIP3,.1,50;

Details

MBRS140T3G

Onsemi

MBRS140T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.6V and max output current of 1A. It operates b/w -65°C to 125°C, making it suitable for various applications requiring high-speed switching and low power loss in a small outline package style. The diode's matte tin terminal finish and dual position terminals enhance its performance in surface mount configurations.

Details

BAV99

Panasonic

MIXER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

FDC5614P

Onsemi

FDC5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 20A Max IDM and 0.105 ohm RDS(ON), operating in ENHANCEMENT MODE at -55 to 150 °C. This SMALL OUTLINE transistor has a built-in diode, GULL WING terminals, and METAL-OXIDE SEMICONDUCTOR technology.

Details

NC7WZ07P6X

Fairchild Semiconductor

BUFFER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR;

Details

SS14

Bytesonic Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148WT

Fairchild Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM358AN

Texas Instruments

LM358AN by Texas Instruments is an Operational Amplifier with 2 functions. It has a Max Input Offset Voltage of 5000 uV and Nominal Common Mode Reject Ratio of 85 dB. Widely used in voltage-feedback applications due to its high Min Voltage Gain of 15000 and Unity Gain Bandwidth of 1000 kHz.

Details

ULN2803A

Vishay Intertechnology

NPN; Configuration: COMPLEX; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; JESD-30 Code: R-PDIP-T18;

Details

EU2B-YS2J03C

Idec

ROTARY SWITCH;

Details

W2S-P012 Technical Details

TYPE	DESCRIPTION
Other Names:	-1494-W2S-P012-CSI -W2S-P012-SI 1734-1863
Wire Gauge (AWG):	0
Usage:	DT SERIES
Maximum Wire Size:	0 AWG
IEC Conformity:	NO
Material:	POLYBUTYLENE TEREPHTHALATE
Minimum Operating Temperature:	-55 Cel
Design:	POWER AND SIGNAL
MIL Conformity:	NO
Connector Accessory Type:	CONNECTOR ACCESSORY
Assembly Item Name:	WEDGE ITEM
Maximum Operating Temperature:	125 Cel
DIN Conformity:	NO

Category Top Products

15305171

Aptiv

CONNECTOR ACCESSORY; MIL Conformity: NO; DIN Conformity: NO; IEC Conformity: NO; Assembly Item Name: SEAL PLUG;

HR30-SC-211

Hirose Electric

The Hirose Electric HR30-SC-211 CONTACT is a FEMALE connector for 26 AWG wires. It features STRAIGHT mounting style and is made of PHOSPHOR BRONZE. Ideal for assembly products requiring precise wire connections in various applications.

DZ5CE003L6

Schneider Electric Sa

Schneider Electric Sa's DZ5CE003L6 ferrule has NFC approval, operates b/w -20°C to 105°C, and supports up to 24 AWG wire. Ideal for electrical assemblies requiring copper material with precise wire termination in various applications.

R85049/85-08W02

TE Connectivity

CONNECTOR ACCESSORY; Material: ALUMINUM ALLOY; Maximum Wire Size: 0 AWG; Minimum Operating Temperature: -65 Cel; Wire Gauge (AWG): 0; Maximum Operating Temperature: 175 Cel;

1701065

Phoenix Contact

TERMINAL BLOCK ACCESSORY; IEC Conformity: NO; Assembly Item Name: PITCH SPACER; MIL Conformity: NO; Manufacturer Series: 1701065; DIN Conformity: NO;

1375819-1

TE Connectivity

TE Connectivity's 1375819-1 CONTACT features CRIMP terminal type, rated voltage of 250V, and wire gauge of 22 AWG. Ideal for SIGNAL design applications with a max operating temperature of 105°C and rated current of 4A.

61030012010

Harting Electronics & Kg

The Harting Electronics & Kg 61030012010 is a metal HOOD for D-SUB CONNECTOR. It has a max operating temp of 90°C and min of -20°C. Mounting options include SCREW (#4-40).

1393366-1

TE Connectivity

TE Connectivity's 1393366-1 is a CRIMP terminal with stamped contact design. It supports wire gauge 18 (AWG) and has a rated current of 11A. Ideal for applications requiring a female contact gender, with operating temperatures ranging from -40 to 125°C.

G125-0010005

Harwin Plc

G125-0010005 by Harwin PLC is a female contact with round pin-socket style, made of beryllium copper. It has a rated current of 2.8A and can handle up to 450V AC/DC voltage. With a terminal length of 0.079 inch, it is ideal for signal applications requiring crimp terminals in assemblies with 0.031 inch cable entry.

SXA-001T-P0.6L

J S T Mfg

SXA-001T-P0.6L by J S T Mfg is a CRIMP terminal CONTACT with 3A rated current, suitable for XA CONNECTOR applications. It has approvals from CSA, TUV, and UL, with a temperature range of -25 to 85 °C. The FEMALE contact is made of PHOSPHOR BRONZE material and supports wire sizes from 26 to 22 AWG.

W12P

TE Connectivity

The TE Connectivity W12P is a UL-approved assembly product with operating temperatures ranging from -55°C to 125°C. It features a max wire size of 0 AWG and is designed for power and signal applications using polybutylene terephthalate material. Ideal for various industrial and commercial electrical connections.