Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

1766274-1

Manufacturer

TE Connectivity
Manufacturer's Part Number

1766274-1
Description

CONNECTOR ACCESSORY; Rated Current: 200 A; Wire Gauge (AWG): 0; Design: POWER; Mounting Style: STRAIGHT; Contact Gender: MALE;
Datasheet

Datasheet

Not In Stock

Popular Products

SMBJ18CA

Yangzhou Yangjie Electronics

TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;

Details

U.FL-R-SMT-1(10)

Hirose Electric

U.FL-R-SMT-1(10) by Hirose Electric is a RF connector with 50 ohm impedance, 0.05 dB insertion loss, and 8 GHz operating frequency. Ideal for board mounting in commercial applications, it features gold termination finish, liquid crystal polymer insulator, and 200VAC dielectric voltage resistance.

Details

1N4148WS

Eic Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

AMS1117-3.3

Advanced Monolithic Systems

AMS1117-3.3 by Advanced Monolithic Systems is a fixed positive single output LDO regulator with 1A max output current, 3% voltage tolerance, and 1.3V dropout voltage. Ideal for applications requiring stable 3.3V supply in compact designs due to its small outline package and excellent load regulation of 0.025%.

Details

1N4148

Continental Device India

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

BSS138

NXP Semiconductors

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Terminals: 3; Maximum Drain Current (ID): .2 A; Operating Mode: ENHANCEMENT MODE;

Details

ULN2803A

Rochester Electronics

NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Additional Features: LOGIC LEVEL COMPATIBLE; Qualification: Not Qualified;

Details

1N4148

Tak Cheong Electronics Holdings

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

ISO1050DUBR

Texas Instruments

ISO1050DUBR by Texas Instruments is a network interface IC with 8 terminals, operating from -55 to 105°C. It features a small outline package, nickel palladium gold finish, and gull wing terminal form. Ideal for telecom applications requiring a 5V supply voltage and peak reflow temperature of 260°C.

Details

SMBJ18CA

Pulse Electronics

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

CC0603KRX7R9BB104

Yageo

Yageo's CC0603KRX7R9BB104 is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. With X7R temperature characteristics, it operates b/w -55 to 125°C. Ideal for surface mount applications in electronics due to its compact size of 1.6mm x 0.8mm x 0.8mm and wraparound terminals.

Details

2N2222A

Bharat Electronics

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

BSS138

Good-ark Electronics

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;

Details

ULN2803ADWG4

Texas Instruments

ULN2803ADWG4 by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates at temperatures ranging from -40 to 85°C and has a max supply voltage of 3V. Ideal for applications requiring sink current flow direction in a small outline package style.

Details

IRLML6401TRPBF

International Rectifier

P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Minimum Operating Temperature: -55 Cel; Avalanche Energy Rating (EAS): 33 mJ;

Details

2N7002

North American Philips Discrete Products Div

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Operating Mode: ENHANCEMENT MODE; Maximum Drain Current (ID): .115 A;

Details

BAV99

First Components International

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

261

Micronetics

Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;

Details

LM358AN

Signetics

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

FDN306P

Fairchild Semiconductor

P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Maximum Drain Current (Abs) (ID): 2.6 A; Operating Mode: ENHANCEMENT MODE;

Details

1766274-1 Technical Details

TYPE	DESCRIPTION
Design:	POWER
Mounting Style:	STRAIGHT
Other Names:	1766274-1-SI-ND -1766274-1-SI 1766274-1-ND A101898 1766274-1-SI 17662741
Wire Gauge (AWG):	0
Maximum Wire Size:	0 AWG
Finish Thickness:	200
Contact Gender:	MALE
Connector Accessory Type:	CONNECTOR ACCESSORY
Maximum Operating Temperature:	105 Cel
Rated Current:	200 A
Material:	COPPER ALLOY
Minimum Operating Temperature:	-55 Cel

Category Top Products

SXA-001T-P0.6

J S T Mfg

SXA-001T-P0.6 by J S T Mfg is a UL approved XA connector with crimp terminals for 28-22 AWG wires, rated at 3A and 250V AC/DC. It features female contacts with 20 mohm resistance, suitable for applications requiring straight mounting and operating temperatures b/w -25 to 85°C.

2411-001-2405

TE Connectivity

TE Connectivity 2411-001-2405 nut item for HDP Series Size 24 assemblies. Features include max operating temp of 125°C, min operating temp of -55°C, and contact gender female. Ideal for use with 0 AWG wire due to glass-filled PEI material.

3200043

Phoenix Contact

TERMINAL BLOCK ACCESSORY; IEC Conformity: NO; MIL Conformity: NO; Approvals (V): CSA; UL; Material: COPPER ALLOY; DIN Conformity: NO;

1375801-1

TE Connectivity

TE Connectivity 1375801-1 shroud with UL approval, max temp of 105°C, min temp of -55°C. Ideal for assemblies requiring POLYBUTYLENE TEREPHTHALATE material and accommodating up to 0 AWG wire size.

M23053/5-103-9

Alpha Wire

ASSEMBLY ITEMS; DIN Conformity: NO; IEC Conformity: NO; Construction: SINGLE WALL; MIL Conformity: NO; Assembly Item Name: TAPER SLEEVE;

WM-6P

TE Connectivity

TE Connectivity's WM-6P is an Assembly Product for DTM SERIES. It operates b/w -55°C to 125°C, accommodating wire sizes up to 0 AWG. Designed for power and signal applications, it features Polybutylene Terephthalate material for robust performance.

1-66741-1

TE Connectivity

TE Connectivity 1-66741-1 is a CRIMP terminal for CPC/G and M SERIES connectors. With a wire gauge of 10 AWG, it supports up to 35A current rating. Made of copper alloy, it is designed for power applications with female contact gender in right angle mounting style.

0462-201-1631

TE Connectivity

TE Connectivity's 0462-201-1631 contact features a CRIMP terminal type, MACHINED contact design, and can handle temperatures from -55 to 150 °C. Ideal for applications requiring a FEMALE ROUND PIN-SOCKET contact style with wire sizes ranging from 20 to 16 AWG and rated current of 13 A.

213823-2

TE Connectivity

TE Connectivity 213823-2 is a RECEPTACLE with Shell Size of 14. It has Max Operating Temp of 105°C and Min Operating Temp of -55°C. Made of ZINC ALLOY, it supports wire size up to 0 AWG, ideal for assembly applications.

FSD77-8-DSL2

Panduit

TERMINAL BLOCK ACCESSORY; MIL Conformity: NO; DIN Conformity: YES; Assembly Item Name: FERRULE; Approvals (V): CSA; Maximum Cable Entry: .12 inch;

560124-0101

Molex

CONNECTOR ACCESSORY;

JCAP

Switchcraft

CONNECTOR ACCESSORY;

2411-002-1805

TE Connectivity

CONNECTOR ACCESSORY; Contact Gender: FEMALE; Wire Gauge (AWG): 0; Minimum Operating Temperature: -55 Cel; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 125 Cel;

221-523/000-004

Wago

TERMINAL BLOCK ACCESSORY;

AT13-204-2005-SR

Amphenol

CONNECTOR ACCESSORY;

221-505/000-004

Wago

TERMINAL BLOCK ACCESSORY;

12010300

Aptiv

CONNECTOR ACCESSORY;

AWM-6P

Amphenol

CONNECTOR ACCESSORY;

12124582

Aptiv

Aptiv 12124582 CONTACT is a CRIMP terminal made of COPPER ALLOY for FLRY-B cables. It has a 0.075-0.11 inch cable entry range, ideal for automotive wiring harness assembly. This Assembly Product offers precise and reliable connections in vehicle electrical systems.

685030101

Molex

CONNECTOR ACCESSORY;