Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

165565-1

Manufacturer

TE Connectivity
Manufacturer's Part Number

165565-1
Description

PUSH-ON TERMINAL; Additional Features: NYLON; Wire Gauge: 16 AWG; Voltage (Rated): 300 V; Terminal Gender: FEMALE; Wire Cross Section: 1.5 mm2;
Datasheet

Datasheet

Not In Stock

Popular Products

SS14

Forward International Electronics

RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; No. of Elements: 1; No. of Phases: 1; Maximum Output Current: 1 A;

Details

LL4148

Daco Semiconductor

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

DS18B20Z+

Maxim Integrated

TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Body Width: 3.9 inch; Maximum Supply Voltage: 5.5 V;

Details

2N7002

Secos

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;

Details

LM358N

Freescale Semiconductor

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

2N2222A

STMicroelectronics

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;

Details

261

Mercury Systems

Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;

Details

2N2222A

Secos

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .6 A; JEDEC-95 Code: TO-92;

Details

LL4148

Semtech Electronics

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

BSS123,215

Nexperia

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Moisture Sensitivity Level (MSL): 1; No. of Terminals: 3; Maximum Time At Peak Reflow Temperature (s): 30;

Details

LM555CM

Texas Instruments

LM555CM by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V and max operating temperature of 70°C. It comes in a small outline package, suitable for applications requiring pulse generation or rectangular waveform outputs. With surface mount capability and low supply current of 15mA, it is ideal for commercial-grade electronic circuits.

Details

1N4148WS

Fairchild Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SMBJ18CA

Meritek Electronics

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SS14+

Multicomp Pro

SS14+ by Multicomp Pro is a Schottky rectifier diode with a max output current of 1A and a reverse test voltage of 40V. It is designed for surface mount applications in electronic circuits, offering a small outline package style and dual terminal position. With a temperature range from -65°C to 150°C, it is suitable for various industrial and consumer electronics.

Details

LM358N

Texas Instruments

LM358N by Texas Instruments is an operational amplifier with 2 functions, offering a max input offset voltage of 9000 uV and a nominal common mode reject ratio of 85 dB. Widely used in commercial applications, it operates at temperatures ranging from 0 to 70 °C and has a unity gain bandwidth of 1000 kHz.

Details

1N4148

Forward International Electronics

RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Maximum Operating Temperature: 200 Cel; No. of Phases: 1;

Details

STM32F103C8T6

STMicroelectronics

STM32F103C8T6 by STMicroelectronics is a 32-bit microcontroller with 48 terminals, operating at up to 16 MHz. It features 10-Ch 12-Bit ADC channels and 7 DMA channels, suitable for industrial applications requiring low power consumption and high-speed connectivity via CAN, I2C(2), SPI(2), USART(3), USB.

Details

SMBJ18CA

KYOCERA AVX

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

INA826AIDGKR

Texas Instruments

INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.

Details

1N4148WT

Diotec Semiconductor Ag

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

165565-1 Technical Details

TYPE	DESCRIPTION
Wire Cross Section:	1.5 mm²
Terminal Gender:	Female
Product Type:	Push-On Terminal
Safety Compliance:	UL
Additional Features:	Nylon
Wire Gauge:	16 AWG
Rated Voltage:	300 V

Category Top Products

1733651

Phoenix Contact

Phoenix Contact 1733651 is a BARRIER STRIP TERMINAL BLOCK with 10 ways, rated for 17.5A current and 400V voltage. It uses SCREW fastening method and supports wire gauge up to 14 AWG. Ideal for BOARD mounting, it has safety approvals from CB, CCA, CSA, CUL, GOST, and UL.

1840366

Phoenix Contact

Phoenix Contact 1840366 is a BARRIER STRIP TERMINAL BLOCK with 2 ways, rated for 8A current and 300V voltage. It accepts wire gauge up to 14 AWG (1.5 mm2) and is approved by CSA, UL, VDE. Ideal for CABLE mounting applications requiring secure connections.

1777811

Phoenix Contact

Phoenix Contact 1777811 is a UL-approved barrier strip terminal block with 3 ways, rated for 12A current and 250V voltage. It has a mounting type of CABLE and accepts wire gauge up to 12 AWG. Ideal for industrial applications requiring secure electrical connections.

AMP-0-0640903-1

TE Connectivity

TE Connectivity's AMP-0-0640903-1 is a FEMALE PUSH-ON TERMINAL with UL approval, rated for 300V voltage and 18 AWG wire gauge. Ideal for 0.96 mm2 wire cross sections, it excels in various applications requiring reliable electrical connections.

19001-0007

Molex

Molex 19001-0007 is a UL-approved TAB TERMINAL for 18 AWG wire, rated at 300V. With 0.8 mm2 wire cross section, it's ideal for male terminal applications in various industries.

64319-1201

Molex

FORK TERMINAL; Manufacturer Series: 64319;

36161

TE Connectivity

RING TERMINAL; Additional Features: NYLON; Wire Gauge: 10 AWG; Voltage (Rated): 300 V; Wire Cross Section: 6.64 mm2; No. of Ways: 1;

770904-1

Tyco Electronics Amp

WIRE TERMINAL; Wire Gauge: 22 AWG; Manufacturer Series: 770904; Wire Cross Section: .9 mm2; Terminal Gender: FEMALE;

221-413/VE00-2500

Wago

The Wago 221-413/VE00-2500 is a BARRIER STRIP TERMINAL BLOCK with 3 ways, rated for 20A current and 600V voltage. It supports wire gauge up to 12 AWG and wire cross section of 4 mm2. Ideal for CABLE mounting applications, it holds safety approvals like ABS, CUL, EN/EC, PSE, and UL.