Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

165536-1

Manufacturer

TE Connectivity
Manufacturer's Part Number

165536-1
Description

PUSH-ON TERMINAL; Wire Gauge: 13.5 AWG; Wire Cross Section: 2.5 mm2; Terminal Gender: FEMALE; Safety Approval: UL;
Datasheet

Datasheet

Not In Stock

Popular Products

SBAV99LT1G

Onsemi

SBAV99LT1G by Onsemi is a rectifier diode with a max repetitive peak reverse voltage of 100V. It has a small outline package style and a fast max reverse recovery time of 0.006 us. It is commonly used in applications requiring low power dissipation and high operating temperatures.

Details

FDN306P

Onsemi

FDN306P by Onsemi is a P-CHANNEL FET with 12V DS Breakdown Voltage, ideal for SWITCHING applications. It features SINGLE configuration with BUILT-IN DIODE and GULL WING terminals. Operating in ENHANCEMENT MODE, it has a max ID of 2.6A and 0.04 ohm RDS(on), suitable for small outline packages at temperatures ranging from -55 to 150°C.

Details

BSS138-TP

Micro Commercial Components

BSS138-TP by Micro Commercial Components is a N-channel small signal FET with a min DS breakdown voltage of 50V and max drain current of 0.22A. It is commonly used in applications requiring enhancement mode operation, such as power management and switching circuits.

Details

BAV99

Meritek Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LL4148

Vishay Telefunken

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

LM2675M-ADJ/NOPB

Texas Instruments

LM2675M-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with 1A output current, 37V max output voltage, and 260kHz max switching frequency. Ideal for automotive applications due to its -40°C to 125°C operating temperature range and compact small outline package design.

Details

NE555D

STMicroelectronics

PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;

Details

1N4148

Microsemi

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

M39029/58-360

Fct Electronic

CONNECTOR ACCESSORY; IEC Conformity: NO; Alternate Contact Sources: MILITARY; MIL Conformity: YES; Contact Gender: MALE; MIL-Connector Accessory Name: CONTACT;

Details

MBR130T1G

Onsemi

MBR130T1G by Onsemi is a Schottky rectifier diode with max output current of 1A and max repetitive peak reverse voltage of 30V. It operates b/w -65 to 125°C, suitable for surface mount applications in electronics requiring low forward voltage drop.

Details

C1210C104K5RACTU

KEMET Corporation

KEMET C1210C104K5RACTU is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics and ±10% tolerance, suitable for surface mount applications in a wide temperature range from -55°C to 125°C. Its compact rectangular package makes it ideal for various electronic devices.

Details

AT90CAN128-16AUR

Microchip Technology

AT90CAN128-16AUR by Microchip: 16 MHz clock, 8-bit data RAM, and 131072 ROM words. Ideal for industrial applications with CAN, SPI, TWI connectivity and low power mode. Contains 4 timers, 8 ADC channels, and supports up to 10-bit analog to digital conversion.

Details

2N7002

Kec

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;

Details

FDLL4148

Fairchild Semiconductor

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

SMBJ18CA

General Semiconductor

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BAV99

ROHM

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

INA826AIDGKR

Texas Instruments

INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.

Details

ULN2803A

Onsemi

NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified;

Details

1554216004

Molex

WIRE AND CABLE;

Details

SS14

Surge Components

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

165536-1 Technical Details

TYPE	DESCRIPTION
Wire Cross Section:	2.5 mm²
Terminal Gender:	Female
Product Type:	Push-On Terminal
Safety Compliance:	UL
Wire Gauge:	13.5 AWG

Category Top Products

1776228-1

TE Connectivity

TE Connectivity's 1776228-1 is a BARRIER STRIP TERMINAL BLOCK with 4 ways, rated for 20A current and 300V voltage. It uses SCREW fastening method and supports 12 AWG wire gauge. Ideal for CABLE mounting applications, it holds CSA and UL safety approvals.

4470

Keystone Electronics

PUSH-ON TERMINAL;

EM4095-000

TE Connectivity

SPLICE TERMINAL; Wire Gauge: 16 AWG; Safety Approval: UL;

48-7191

Amphenol

SPLICE TERMINAL;

221-612

Wago

The Wago 221-612 Barrier Strip Terminal Block is rated for 600V and 30A, accommodating wire gauge up to 10 AWG. With safety approvals from CUL, EN, IEC, KEMA, KEUR, and UL, it's ideal for applications requiring a secure connection with its spring-loaded fastening method. Suitable for use in various industries due to its versatility and reliability.

MS25036-101

Defense Logistics Agency

RING TERMINAL; Wire Gauge: 16 AWG; Voltage (Rated): 300 V; Safety Approval: UL; Wire Cross Section: 1.42 mm2; No. of Ways: 1;

MS25036-103

TE Connectivity

TE Connectivity's MS25036-103 is a UL-approved ring terminal with a wire gauge of 16 AWG and a rated voltage of 300V. It is suitable for applications requiring a single-way connection, with a wire cross section of 1.65 mm2.

MKDS1,5/3-5,08

Phoenix Contact

Phoenix Contact MKDS1,5/3-5,08 is a BARRIER STRIP TERMINAL BLOCK with 1.5mm2 wire cross section and 400V rated voltage. It supports up to 17.5A current, suitable for BOARD mounting in various applications requiring CCA, CSA, CUL, GOST, SEV, and UL safety approvals.

74650073R

Wuerth Elektronik & Kg

POWER TERMINAL; Current (Rated): 50 A;

MS25036-108

Amphenol Communications Solutions

RING TERMINAL; Additional Features: MATERIAL: POLYAMIDE; Wire Gauge: 14 AWG; Voltage (Rated): 600 V; Safety Approval: CSA; MIL; UL; Wire Cross Section: 2.08 mm2;

7460307

Wuerth Elektronik & Kg

PCB TERMINAL;

1731721

Phoenix Contact

Phoenix Contact 1731721 is a UL-approved barrier strip terminal block with 2 ways, rated for 24A current and 500V voltage. It accommodates wire gauge up to 12 AWG and wire cross section of 2.5mm², mounted on board using screws. Ideal for industrial applications requiring secure electrical connections.

MS25036-156

Defense Logistics Agency

RING TERMINAL; Wire Gauge: 10 AWG; Voltage (Rated): 300 V; Safety Approval: UL; Wire Cross Section: 6 mm2; No. of Ways: 1;

744-303/000-007

Wago

BARRIER STRIP TERMINAL BLOCK;

2-320569-3

Tyco Electronics Amp

RING TERMINAL; Wire Gauge: 10 AWG; Voltage (Rated): 300 V; Safety Approval: UL; Terminal Gender: FEMALE; No. of Ways: 1;

1935174

Phoenix Contact

The Phoenix Contact 1935174 is a UL-approved BARRIER STRIP TERMINAL BLOCK for BOARD mounting. It supports wire gauge up to 14 AWG with a rated voltage of 250V and current of 17.5A, suitable for applications requiring secure connections in industrial control systems.

MSTBA2,5/4-G-5,08

Phoenix Contact

The Phoenix Contact MSTBA2,5/4-G-5,08 is a 4-way strip terminal block with a rated current of 12A and voltage of 320V. It supports wire gauge up to 13 AWG and wire cross-section of 2.5mm², making it ideal for board mounting applications requiring secure connections. This terminal block has safety approvals from CB, CSA, CUL, EAC, UL, and VDE.

1SNK705010R0000

TE Connectivity

TE Connectivity's 1SNK705010R0000 is a DIN RAIL modular terminal block with UL safety approval. Rated for 600V voltage, it supports 12 AWG wire gauge and 2.5mm2 wire cross section, handling up to 20A current. Ideal for industrial applications requiring secure electrical connections on DIN rails.

51863-4

Tyco Electronics Amp

RING TERMINAL; Wire Gauge: 18 AWG; Voltage (Rated): 300 V; Wire Cross Section: .96 mm2; Terminal Gender: FEMALE; Safety Approval: UL;

15118

Etco

WIRE TERMINAL;