Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

1-770520-1

Manufacturer

TE Connectivity
Manufacturer's Part Number

1-770520-1
Description

CONNECTOR ACCESSORY; Rated Current: 11 A; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 105 Cel; Terminal Type: CRIMP; Minimum Wire Size: 24 AWG;
Datasheet

Datasheet

Not In Stock

Popular Products

LM358DT

STMicroelectronics

LM358DT by STMicroelectronics is a dual operational amplifier with a max input offset voltage of 9000 uV. It operates at a nominal voltage of 5V and has a min voltage gain of 25000. This amplifier is commonly used in applications requiring high precision and low power consumption.

Details

LAN8720AI-CP-TR

Microchip Technology

LAN8720AI-CP-TR by Microchip is an Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85 °C. It features a 3.3 V supply voltage, 54 mA supply current, and TS 16949 screening level. Ideal for network interfaces in industrial applications due to its compact square package and low profile design.

Details

2N7002

Vishay Intertechnology

2N7002 by Vishay Intertechnology is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE, suitable for surface mount with GULL WING terminals.

Details

1N4148

Shenzhen Yixinsemi Electronics

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

1N4148

Daco Semiconductor

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

LL4148

Itt Semiconductor

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

LM555CM

Texas Instruments

LM555CM by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V and max operating temperature of 70°C. It comes in a small outline package, suitable for applications requiring pulse generation or rectangular waveform outputs. With surface mount capability and low supply current of 15mA, it is ideal for commercial-grade electronic circuits.

Details

2N2222A

Ksl Microdevices

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

1N4148

Leshan Radio

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

LM7805CT

Onsemi

FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;

Details

2N2222A

Semiconductors

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

AMS1117-3.3

Advanced Monolithic Systems

AMS1117-3.3 by Advanced Monolithic Systems is a fixed positive single output LDO regulator with 1A max output current, 3% voltage tolerance, and 1.3V dropout voltage. Ideal for applications requiring stable 3.3V supply in compact designs due to its small outline package and excellent load regulation of 0.025%.

Details

2N2222A

New England Semiconductor

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

ECS-.327-12.5-17X-TR

Ecs International

ECS-0.327-12.5-17X-TR by Ecs International is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing in temperature ranges from -40 to 85 °C, such as telecommunications and industrial automation.

Details

1N4148

Hy Electronic

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

FDN5618P

Fairchild Semiconductor

P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Transistor Element Material: SILICON; Moisture Sensitivity Level (MSL): 1;

Details

2N2222A

Zetex Plc

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

DP83848IVVX/NOPB

Texas Instruments

Texas Instruments DP83848IVVX/NOPB is a 3.3V Ethernet transceiver with 100000 Mbps data rate, suitable for industrial applications. It features CMOS technology, operates b/w -40 to 85 °C, and comes in a low profile flatpack package with matte tin finish.

Details

2N2222A

Silicon Transistor

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

SMBJ18CA

Uniohm

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1-770520-1 Technical Details

TYPE	DESCRIPTION
Other Names:	-1076-1-770520-1CT 17-1-770520-1TR
Wire Gauge (AWG):	22
Maximum Wire Size:	22 AWG
Minimum Cable Entry:	.055 inch
Contact Design:	STAMPED
Terminal Type:	CRIMP
Minimum Operating Temperature:	-40 Cel
Cross Section Area:	.35 mm2
Minimum Wire Size:	24 AWG
Connector Accessory Type:	CONNECTOR ACCESSORY
Maximum Operating Temperature:	105 Cel
Rated Current:	11 A
Maximum Cable Entry:	.07 inch

Category Top Products

293726-1

TE Connectivity

CONNECTOR ACCESSORY;

SPH-002T-P0.5S

J S T Mfg

SPH-002T-P0.5S by J S T Mfg is a CRIMP terminal for PH SERIES HOUSING with 2A rated current, 20 mohm contact resistance, and 0.031-0.059 inch cable entry range. It is designed for SIGNAL applications with FEMALE SQ PIN-SKT contacts made of PHOSPHOR BRONZE material.

1-1452424-1

TE Connectivity

CONNECTOR ACCESSORY; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 125 Cel; Minimum Operating Temperature: -40 Cel;

2411-001-2405

TE Connectivity

TE Connectivity 2411-001-2405 nut item for HDP Series Size 24 assemblies. Features include max operating temp of 125°C, min operating temp of -55°C, and contact gender female. Ideal for use with 0 AWG wire due to glass-filled PEI material.

87116-2

TE Connectivity

CONNECTOR ACCESSORY; Maximum Wire Size: 0 AWG; Wire Gauge (AWG): 0; MIL Conformity: NO; Material: NYLON66; Assembly Item Name: KEYING ITEM;

1053002100

Molex

CONNECTOR ACCESSORY;

MTCB1X-105-XXX

TE Connectivity

TE Connectivity's MTCB1X-105-XXX is an Assembly Product with a max operating temperature of 125°C and min of -65°C. It supports up to 0 AWG wire size, rated for 1.5A current, and features male contact gender. Ideal for applications involving round wire due to its Polyarylene/Polyethylene material composition.

90119-0109

Molex

Molex 90119-0109 CONTACT features CRIMP terminal type, suitable for 24-22 AWG wires. Made of PHOSPHOR BRONZE with 0.168" length, it has FEMALE gender and SQUARE PIN-SOCKET style. Ideal for applications requiring 0.04-0.058" cable entry, such as assembly products needing a STRAIGHT mounting style.

3595

Keystone Electronics

Assembly Items;

42815-0114

Molex

CONNECTOR ACCESSORY;

1201578

Phoenix Contact

TERMINAL BLOCK ACCESSORY; IEC Conformity: NO; Insulator Material: POLYAMIDE; DIN Conformity: NO; MIL Conformity: NO; Assembly Item Name: RAIL ADAPTER;

1720630311

Molex

Molex 1720630311 CONTACT features CRIMP terminals, COPPER ALLOY material, and FEMALE contact gender. With a rated current of 23A and max operating temperature of 120°C, it is ideal for power applications with wire sizes ranging from 16 to 14 AWG.

1-1469492-1

TE Connectivity

TE Connectivity 1-1469492-1 is an Assembly Product with max. operating temp. of 105°C and min. operating temp. of -55°C. It features a max wire size of 0 AWG, rated current of 1A, and mounting style in right angle zinc alloy material. Ideal for guiding items in various applications.

3505-28B

3m Electronic Products Division

CONNECTOR ACCESSORY; Manufacturer Series: 3505;

SPH-002T-P0.5L

J S T Mfg

SPH-002T-P0.5L by J S T Mfg is a PAD SERIES CONNECTOR with CRIMP terminals, rated for 3A at 250V AC/DC. It has a contact resistance of 20 mohm and operates b/w -25°C to 85°C. Ideal for applications requiring FEMALE contacts with wire sizes ranging from 28 AWG to 24 AWG.

205089-1

TE Connectivity

TE Connectivity's 205089-1 CONTACT is a male signal round pin-socket designed for AMPLIMITE usage. It features a copper alloy construction, crimp terminal type, and can handle wire sizes from 24 to 20 AWG with a rated current of 7.5 A. Operating temperatures range from -55 to 125°C, making it suitable for various assembly applications.

R85049/85-08W02

TE Connectivity

CONNECTOR ACCESSORY; Material: ALUMINUM ALLOY; Maximum Wire Size: 0 AWG; Minimum Operating Temperature: -65 Cel; Wire Gauge (AWG): 0; Maximum Operating Temperature: 175 Cel;

66570-8

TE Connectivity

TE Connectivity 66570-8 is a male signal contact with solder terminal type. It has a max operating temperature of 105°C and min of -55°C. Suitable for CPC connectors and Amplimite HDP-20, it features a finish thickness of 30 microns, wire gauge up to 18 AWG, and rated current of 3.1A.

AT60-204-12141

Amphenol

CONNECTOR ACCESSORY;

3036916

Phoenix Contact

TERMINAL BLOCK ACCESSORY; MIL Conformity: NO; Approvals (V): UL; DIN Conformity: NO; Material: COPPER; IEC Conformity: NO;