Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

1-350944-0

Manufacturer

TE Connectivity
Manufacturer's Part Number

1-350944-0
Description

POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Insulator Material: POLYAMIDE;
Datasheet

Datasheet

Not In Stock

Popular Products

2N2222A

Solid State Devices

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

BSS138LT1G

Onsemi

BSS138LT1G by Onsemi is a N-CHANNEL FET with 50V DS Breakdown Voltage, 0.2A Drain Current, and 3.5 ohm On Resistance. Ideal for SWITCHING applications due to its ENHANCEMENT MODE operation and built-in DIODE. Operates b/w -55 to 150 °C with small outline package style for surface mount assembly.

Details

SMBJ18CA

Hy Electronic

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148

Onsemi

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

1N4148

Shandong Yiguang Electronic Joint Stock

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

261

Micronetics

Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;

Details

INA826AIDGKR

Texas Instruments

INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.

Details

LM358N

Freescale Semiconductor

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

SMBJ18CA

Jiangsu Jiejie Microelectronics

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BSS123NH6327XTSA1

Infineon Technologies

Infineon BSS123NH6327XTSA1 is a N-CHANNEL FET with 100V DS breakdown voltage, 0.19A ID, and 6 ohm RDS(on). Ideal for small outline applications requiring high drain current and low on-resistance. AEC-Q101 compliant for automotive use.

Details

LM358D-T

Philips Semiconductors

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

Details

SMBJ18CA

Multicomp Pro

TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Diode Element Material: SILICON; Technology: AVALANCHE; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V;

Details

LM317T/NOPB

National Semiconductor

ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; JESD-609 Code: e3; Package Shape: RECTANGULAR;

Details

BSS138

Jiangsu Changjiang Electronics Technology

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Style (Meter): SMALL OUTLINE; Maximum Drain Current (ID): .22 A; Package Shape: RECTANGULAR;

Details

OPA2227UA

Texas Instruments

OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.

Details

STM32F401CDY6TR

STMicroelectronics

STM32F401CDY6TR by STMicroelectronics is a 32-bit microcontroller with 393216 ROM words, 50 MHz clock frequency, and 36 I/O lines. It is used in applications requiring high-speed processing, such as industrial automation and consumer electronics.

Details

LM555CN

Texas Instruments

LM555CN by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V. It operates b/w 0°C to 70°C, making it suitable for commercial applications. This rectangular package IC has dual terminals and uses bipolar technology for pulse generation in various electronic circuits.

Details

SMBJ18CA

Littelfuse

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

MMBT2907ALT1G

Onsemi

MMBT2907ALT1G by Onsemi is a PNP BJT transistor with 100 min hFE, 60V VCEO, and 200MHz fT. Ideal for switching applications, it has a small outline package with Gull Wing terminals and can handle up to 0.6A of collector current.

Details

FSMLF327

Fox Electronics

FSMLF327 by Fox Electronics is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing such as communication systems, industrial automation, and consumer electronics. Operating temperature range from -40 to 85 °C.

Details

1-350944-0 Technical Details

TYPE	DESCRIPTION
Mating Info.:	770019-1
IEC Conformity:	NO
Panel Mount:	NO
Sub-Category:	Headers and Edge Type Connectors
MIL Conformity:	NO
Body Length:	1.05 inch
Insulation Resistance:	100000000 ohm
Mixed Contacts:	NO
No. of Ports:	1
Contact Arrangement:	S0P4
EMI Shielded:	NO
Filter Feature:	NO
Mounting Type:	BOARD
Body Depth:	.36 inch
Body Width:	.36 inch
Termination Contact Finish:	Matte Tin (Sn)
No. of Connectors:	ONE
Insulator Material:	POLYAMIDE
Additional Features:	MATE-N-LOK
Option:	GENERAL PURPOSE
Board Mounting Option:	HOLE .112-.124
DIN Conformance:	NO
Mating Contact Finish:	NOT SPECIFIED
Mains Connector Rating:	115/230VAC
Empty Shell:	YES
No. of Rows Loaded:	1
Termination Type:	SOLDER
Maximum Operating Temperature (Cel):	105
Contact Gender:	MALE
Connector Type:	POWER CONNECTOR
Contact Material:	PHOSPHOR BRONZE
Mounting Option-1:	FRICTION RAMP
Mounting Option-2:	LOCKING
UL Flammability Code:	94V-0
Mounting Style:	RIGHT ANGLE
Polarization Key:	POLARIZED
Plating Thickness (inch):	200u
Contact Style:	RND PIN-SKT
JESD-609 Code:	e3
Minimum Operating Temperature:	-40 Cel
Total No. of Contacts:	4
Terminal Pitch (mm):	6.35
Terminal Length:	.16 inch
Rated Current - Signal:	19 A
Insulator Color:	NATURAL
Reference Standard:	CSA, UL, V
Contact Pattern:	RECTANGULAR
Body or Shell Style:	PLUG
Reliability:	COMMERCIAL

Category Top Products

43650-0215

Molex

The Molex 43650-0215 Power Connector features a body length of 0.38", insulation resistance of 1000000000 ohm, and termination contact finish with Bright Tin (Sn) - Nickel (Ni) barrier. It is used in board mounting applications, has a max operating temperature of 105°C, and rated current of 8.5A for signal transmission.

1954289-1

TE Connectivity

TE Connectivity 1954289-1 is a RECTANGULAR POWER CONNECTOR with Dielectric Withstanding Voltage of 1500VAC. It has a Rated Current of 6A and operates b/w -40 to 105 °C. Ideal for board mounting applications requiring high voltage and current capabilities.

15-06-0080

Molex

Molex 15-06-0080 is a rectangular power connector with 8 contacts, POLYAMIDE66 insulator, and UL94V-2 flammability rating. It operates b/w -40°C to 105°C, suitable for commercial applications requiring high insulation resistance of 1Gohm. With solder termination and panel mounting, it offers reliable power connections in various electronic devices.

1723161204

Molex

Molex 1723161204 is a rectangular power connector with matte tin finish, liquid crystal polymer insulator, and copper alloy contacts. Rated for 11A signal current, it operates b/w -40°C to 120°C. Ideal for board mounting applications requiring reliable male connectors with square pin sockets.

120953-2

TE Connectivity

TE Connectivity's 120953-2 is a RECTANGULAR POWER CONNECTOR with 5 contacts, rated at 16A and 250V. Featuring PRESS FIT termination, it has a body size of 0.61" x 0.392" x 0.478". Ideal for board mounting applications in power systems with operating temperatures from -55 to 125°C.

36804-0001

Molex

RECTANGULAR POWER CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Manufacturer Series: 36804; Contact Material: NOT SPECIFIED;

93445-4202

Molex

RECTANGULAR POWER CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;

39-30-1021

Molex

Molex 39-30-1021 is a rectangular power connector with matte tin finish, suitable for board mounting. With dielectric voltage of 1500VAC and insulation resistance of 1000000000 ohm, it operates b/w -40 to 105 °C. This durable connector has male contact gender, brass material, and is ideal for commercial applications requiring reliable signal current up to 9A.

15-24-4449

Molex

The Molex 15-24-4449 is a rectangular power connector with 4 contacts, featuring matte tin finish and polyamide66 insulator. It has a dielectric voltage of 1500VAC, operating temperature range from -40 to 105°C, and durability of 50 cycles. Ideal for board mounting applications in commercial settings.

1-480710-0

TE Connectivity

TE Connectivity 1-480710-0 is a Power Connector with insulation resistance of 100MΩ, operating temp range -55 to 105°C. It has 15 contacts arranged in S0P15 pattern for cable mounting applications.

39-01-2100

Molex

Molex 39-01-2100 is a rectangular power connector with 10 contacts, POLYAMIDE66 insulator, and 1500VAC dielectric voltage. It is used in commercial applications for crimp termination on cables and panels, offering high insulation resistance of 1Gohm and operating temperature range from -40 to 105°C.

1053081208

Molex

Molex 1053081208 is a rectangular power connector with 8 female contacts. It has 0.5" x 0.395" x 0.618" dimensions and uses POLYAMIDE insulator material. Ideal for cable mounting, it operates at -40°C, complies with UL 94V-0 flammability code, and meets CSA and UL standards.

43650-0301

Molex

Molex 43650-0301 is a rectangular power connector with 3 contacts, 0.118" pitch, and 0.172" body width. It features matte tin over nickel finish, glass-filled liquid crystal polymer insulator, and UL 94V-0 flammability rating. Ideal for board mounting applications requiring reliable commercial-grade power connections.

794278-1

TE Connectivity

TE Connectivity 794278-1 is a rectangular power connector with silicone rubber insulator. It has 9 contacts, supports wire sizes from 20 to 14 AWG, and operates b/w -55°C to 105°C. Ideal for cable mounting applications in power systems up to 115/230VAC.

1723104102

Molex

Molex 1723104102 is a POWER CONNECTOR with dimensions 0.405" x 0.352" x 0.614". Made of LIQUID CRYSTAL POLYMER, it operates b/w -40°C to 105°C. Ideal for BOARD mounting, it has 2 SQ PIN-SKT contacts and meets UL standards.

794821-1

TE Connectivity

TE Connectivity's 794821-1 is a RECTANGULAR POWER CONNECTOR with POLYAMIDE insulator, rated at 600V and operating temperature range of -20 to 105 °C. It has 8 contacts, suitable for cable mounting applications in power systems with UL certification.

39-29-1047

Molex

The Molex 39-29-1047 is a rectangular power connector with 4 contacts, made of brass and polyamide insulator. It has a dielectric voltage of 2200VAC, operates b/w -40 to 105°C, and offers durability for up to 30 cycles. Ideal for board mounting applications requiring reliable commercial-grade power connections.

39-01-2085

Molex

The Molex 39-01-2085 is a rectangular power connector with 8 contacts, POLYAMIDE66 insulator, and UL94V-0 flammability rating. It operates b/w -40 to 105°C, withstands up to 1500VAC, and has an insulation resistance of 1Gohm. Ideal for commercial applications requiring reliable crimp termination in cable mounting setups.

2002411125

Molex

RECTANGULAR POWER CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;

34566-0203

Molex

Molex 34566-0203 is a RECTANGULAR POWER CONNECTOR with 73 contacts, ideal for BOARD mounting. Made of GLASS FILLED SYNDIOTACTIC POLYSTYRENE, it features FEMALE contacts and SOLDER termination. Commonly used in applications requiring high-power connections.