Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

LBR2012T100K8

Manufacturer

Taiyo Yuden
Manufacturer's Part Number

LBR2012T100K8
Description

GENERAL PURPOSE INDUCTOR; Inductor Application: RF INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: NO; Surface Mount: YES;
Datasheet

Datasheet

Not In Stock

Popular Products

1N4148

Semitron

RECTIFIER DIODE; Surface Mount: NO; JESD-609 Code: e0; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Maximum Reverse Recovery Time: .004 us;

Details

1552200253

Molex

WIRE AND CABLE;

Details

1N4148

Good-ark Electronics

RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V; No. of Phases: 1;

Details

MBRA340T3G

Onsemi

MBRA340T3G by Onsemi is a Schottky rectifier diode with 40V reverse test voltage and 3A max output current. Ideal for power applications, it operates b/w -55 to 150°C, features matte tin terminal finish, and comes in a small outline package.

Details

LM358M

Texas Instruments

LM358M by Texas Instruments is an Operational Amplifier with 2 functions, featuring a max input offset voltage of 9000 uV and a nominal voltage of 5 V. It is commonly used in applications requiring high common mode rejection ratio and low bias current, such as sensor interfaces and signal conditioning circuits.

Details

4554

Jw Miller Magnetics

Other Semiconductors;

Details

1N4148WS

Dc Components

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM78L05ACMX/NOPB

National Semiconductor

FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;

Details

LM7805CT

Silicon Group

Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Package Body Material: PLASTIC/EPOXY; Maximum Load Regulation: .05 %;

Details

FT232RL-REEL

FTDI

FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.

Details

RK73H2ATTD10R0F

Koa Speer Electronics

RK73H2ATTD10R0F by Koa Speer Electronics is a 0805 SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.25 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V.

Details

USB2514BI-AEZG

Standard Microsystems

BUS CONTROLLER, UNIVERSAL SERIAL BUS; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 36; Package Code: HVQCCN; Package Shape: SQUARE;

Details

LM7805CT

National Semiconductor

FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;

Details

EU2B-YS2J03C

Idec

ROTARY SWITCH;

Details

2N2222A

Good-ark Electronics

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): 1.8 W; Maximum Collector Current (IC): .8 A;

Details

LL4148

International Semiconductor

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

1N4148

Iskra Semic Capacitors Industry

RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; JESD-609 Code: e0; Maximum Non Repetitive Peak Forward Current: 2 A;

Details

2N2222A

Shanghai Lunsure Electronic Technology

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;

Details

2N2222A

Philips Semiconductors

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

L7805CV

STMicroelectronics

L7805CV by STMicroelectronics is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in electronic circuits.

Details

LBR2012T100K8 Technical Details

TYPE	DESCRIPTION
Case or Size Code:	0805
Surface Mount:	Yes
Inductor Type:	General Purpose Inductor
Self Resonance Frequency:	32 MHz
Shielded:	No
Terminal Placement:	Dual Ended
No. of Terminals:	2
DC Resistance:	360 mΩ
Nominal Inductance (L):	10 μH
Package Style (Meter):	SMT
Package Height:	0.049 in (1.25 mm)
Test Frequency:	2.52 MHz
Maximum Operating Temperature:	105 °C (221 °F)
Special Feature:	DC Resistance is measured at 30%
Construction:	Rectangular
Shape or Size Description:	Rectangular Package
Packing Method:	Tape and Reel, Embossed, 7 in
Tolerance:	10 %
Package Length:	0.079 in (2 mm)
Minimum Operating Temperature:	-40 °C (-40 °F)
Inductor Application:	RF Inductor
Maximum Rated Current:	150 mA
No. of Functions:	1
Terminal Shape:	Wraparound
Package Width:	0.049 in (1.25 mm)

Category Top Products

CBC3225T100KR

Taiyo Yuden

Taiyo Yuden's CBC3225T100KR is a 10uH fixed inductor with dual-ended terminals, suitable for power applications. Featuring a max operating temperature of 105°C and 0.9A rated current, it offers low DC resistance at 0.1729 ohm. With a self-resonance frequency of 23MHz and ferrite core material, this general-purpose inductor is ideal for SMT designs.

DR125-470-R

Eaton Corporation

Eaton Corporation's DR125-470-R is a shielded, surface mount fixed inductor with 47uH nominal inductance. It has a max rated current of 2.71A and operates b/w -40 to 125°C. Ideal for power applications, this general purpose inductor features dual-ended terminals and ferrite core material.

DR74-101-R

Eaton Corporation

Eaton Corporation's DR74-101-R is a fixed inductor with 100uH nominal inductance, 0.383 ohm DC resistance, and 0.86A max rated current. It is a shielded, surface mount power inductor suitable for general purpose applications with a temperature range of -40 to 125°C.

SRN8040-220M

Bourns

Bourns SRN8040-220M is a shielded, surface mount inductor with 22uH nominal inductance and 2.2A max rated current. Ideal for power applications, it operates b/w -40 to 125°C with a self-resonance frequency of 12MHz.

B82472G4104M000

TDK

The TDK B82472G4104M000 is a shielded, surface mount fixed inductor with 100uH nominal inductance. It operates b/w -55°C to 125°C, with a max rated current of 0.56A. Ideal for power applications requiring a general purpose inductor in a compact rectangular package.

SRN6045-4R7Y

Bourns

Bourns SRN6045-4R7Y is a shielded SMT inductor with 4.7uH nominal inductance, 3A max current, and -40 to 125°C operating temp. Ideal for power applications due to its general purpose design and ferrite core material.

744773047

Wuerth Elektronik & Kg

Wurth Elektronik 744773047 is a SMT fixed inductor with 4.7uH nominal inductance, 1.82A max current, and -40 to 125°C operating temp range. Ideal for power applications due to its nickel-zinc ferrite core material and rectangular package design.

DRA74-100-R

Eaton Corporation

Eaton Corporation's DRA74-100-R is a shielded fixed inductor with 10uH nominal inductance, 2.97A max current, and -40 to 165°C operating range. Ideal for general purpose applications requiring compact SMT package (7.6x7.6x4.35mm) with 20% tolerance and low DC resistance (0.043 ohm).

DR73-151-R

Coiltronics

GENERAL PURPOSE INDUCTOR; Inductor Application: POWER INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: YES; Surface Mount: YES;

MLZ2012N4R7LT000

TDK

TDK's MLZ2012N4R7LT000 is a surface mount, shielded fixed inductor with dual-ended terminal placement. It has a nominal inductance of 4.7 uH and can handle a max rated current of 0.6 A. This general purpose inductor is suitable for various applications requiring high temperature resistance and low DC resistance.

70-2

Coilcraft

GENERAL PURPOSE INDUCTOR; Inductor Application: FILTER CHOKE; No. of Terminals: 2; Package Style (Meter): Axial; Shielded: NO; Surface Mount: NO;

5609

Bourns

The Bourns 5609 is a fixed inductor with 2500 uH nominal inductance, suitable for RF applications. Featuring radial terminal placement, it has a max operating temperature of 105°C and DC resistance of 2.04 ohm. Ideal for general purpose use, this cylindrical package inductor has a lead spacing of 18 mm.

1506

Hammond Manufacturing

GENERAL PURPOSE INDUCTOR; Inductor Application: RF INDUCTOR; No. of Terminals: 2; Package Style (Meter): Axial; Shielded: NO; Surface Mount: NO;

ETQP4M220YFP

Panasonic

Panasonic ETQP4M220YFP is a shielded, dual-ended fixed inductor with 22uH nominal inductance. Ideal for power applications, it has a max rated current of 2.3A and operates b/w -40 to 150°C. This general-purpose inductor features metal composite core material and meets AEC-Q200 standard.

B82472P6104M000

TDK

The TDK B82472P6104M000 is a shielded, surface mount fixed inductor with 100uH nominal inductance. It has a max rated current of 0.67A and operates b/w -55°C to 150°C. Ideal for power applications, this general purpose inductor features a ferrite core and wraparound terminals.

33467

Hirel Systems

GENERAL PURPOSE INDUCTOR; No. of Terminals: 2; Shielded: NO; Surface Mount: NO; Tolerance: 12 %; DC Resistance: .00017 ohm;

4646

Jw Miller Magnetics

GENERAL PURPOSE INDUCTOR; Inductor Application: RF INDUCTOR; No. of Terminals: 2; Shielded: NO; Surface Mount: NO; Minimum Operating Temperature: -55 Cel;

P1252.782T

Pulse Electronics

Pulse Electronics P1252.782T is a surface mount fixed inductor with 7.8uH nominal inductance, suitable for power applications. It has a max rated current of 7.5A and operates b/w -40°C to 130°C, making it ideal for general purpose use in various electronic circuits.

77A-100M-00

Fastron Electronics

77A-100M-00 by Fastron Electronics is a general purpose inductor with 10uH nominal inductance, 0.042 ohm DC resistance, and 5A max rated current. It is used for various applications requiring a fixed inductor with tubular construction and ferrite core material.

744770147

Wuerth Elektronik & Kg

Wurth Elektronik 744770147 is a shielded SMT inductor with 47uH nominal inductance, suitable for power applications. It has a max rated current of 3A, operating temperature range from -40 to 125°C, and self-resonance frequency of 7.9MHz.