Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

All prices are in USD

Bulk

QTY	Unit Price	Ext Price
675	$7.011	$4,732.425

BTS721L1

Manufacturer

Siemens
Manufacturer's Part Number

BTS721L1
Description

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 20; Package Shape: RECTANGULAR; Terminal Position: DUAL; Turn-off Time: 400 us;
Datasheet

Datasheet

675 In Stock

Popular Products

1N4148WS

Taiwan Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

ULN-2803A

Vishay Sprague

Vishay Sprague's ULN-2803A is an 8-bit peripheral driver with a max supply voltage of 3V. Featuring open-collector output characteristics, it offers built-in transient protections and operates b/w -20°C to 85°C. Ideal for applications requiring sink current flow direction, this rectangular-shaped driver has a terminal pitch of 2.54mm and turn-on/off time of 1us.

Details

SN65HVD234DR

Texas Instruments

SN65HVD234DR by Texas Instruments is an 8-terminal interface circuit with a data rate of 1 Mbps. Operating temperature ranges from -40 to 125 °C, making it ideal for automotive applications. With a supply voltage of 3.3 V and low current draw of 6 mA, it's suitable for network interfaces in compact designs.

Details

LL4148-GS08

Vishay Telefunken

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

1N4148

Itt Components

RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .15 A;

Details

MMBT3904LT1G

Onsemi

MMBT3904LT1G by Onsemi is a NPN BJT with max. collector-emitter voltage of 40V, hFE of 30, and fT of 300MHz. Ideal for small signal applications in electronics due to its compact size, high transition frequency, and low power dissipation capabilities.

Details

1N4148WS

Diodes Incorporated

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LL4148

Lite-on Semiconductor

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

2N2222A

Swampscott Electronics

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

ULN2803A

Rochester Electronics

NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Additional Features: LOGIC LEVEL COMPATIBLE; Qualification: Not Qualified;

Details

SDR0604-101KL

Bourns

SDR0604-101KL by Bourns is a surface mount fixed inductor with a nominal inductance of 100 uH. It is a general purpose inductor suitable for power applications, with a max rated current of 0.52 A and a self-resonance frequency of 9 MHz.

Details

LL4148

Rugao Dachang Electronic

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

BAV99

Changzhou Galaxy Century Microelectronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

FT232RQ-REEL

FTDI

FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.

Details

PIC18F4550-I/P

Microchip Technology

PIC18F4550-I/P by Microchip Technology is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it ideal for industrial applications requiring low power consumption and high-speed data processing. With 2048 RAM bytes and 256 Data EEPROM size, this CMOS technology-based microcontroller offers versatile performance in various embedded systems.

Details

CC0603KRX7R9BB103

Yageo

Yageo CC0603KRX7R9BB103 is a 0603 SMT ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.

Details

LM7805CT

Integrated Circuit Technology

Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Position: SINGLE; Operating Temperature (TJ-Min): 0 Cel;

Details

2N2222A

ROHM

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;

Details

BAV99WT1G

Onsemi

BAV99WT1G by Onsemi is a series connected diode with 0.006 us reverse recovery time. It is a small outline rectifier diode with 70V peak reverse voltage, ideal for surface mount applications in electronics requiring fast switching and low forward voltage drop.

Details

DS18B20U+

Maxim Integrated

TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: SQUARE; Housing: PLASTIC; Minimum Supply Voltage: 3 V;

Details

BTS721L1 Technical Details

TYPE	DESCRIPTION
Minimum Supply Voltage:	5 V
Package Body Material:	PLASTIC/EPOXY
Nominal Supply Voltage:	12 V
Output Characteristics:	OPEN-SOURCE
Surface Mount:	YES
Maximum Supply Current:	12 mA
No. of Terminals:	20
Terminal Position:	DUAL
Package Style (Meter):	SMALL OUTLINE
Technology:	MOS
JESD-30 Code:	R-PDSO-G20
Package Shape:	RECTANGULAR
Terminal Form:	GULL WING
Built-in Protections:	OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE
Interface IC Type:	BUFFER OR INVERTER BASED PERIPHERAL DRIVER
Turn-off Time:	400 us
Other Names:	BTS721L1T BTS721L1T-ND SP000011303
Output Polarity:	TRUE
Input Characteristics:	SCHMITT TRIGGER
Maximum Supply Voltage:	34 V
Turn-on Time:	400 us
Nominal Output Peak Current Limit:	18 A
No. of Functions:	2
Qualification:	Not Qualified
Output Current Flow Direction:	SOURCE

Category Top Products

DRV8846RGET

Texas Instruments

Texas Instruments DRV8846RGET is a 24-terminal peripheral driver with built-in protections for transient, over current, thermal, and under voltage. It operates in industrial temperature range (-40 to 85°C) with a max output current of 2A. Ideal for applications requiring source and sink output current flow direction in a compact chip carrier package.

IRS2184STRPBF

Infineon Technologies

IRS2184STRPBF by Infineon Technologies is a peripheral driver with 8 terminals and built-in transient & under voltage protections. It operates b/w -40 to 125 °C, with turn-on time of 0.9 us and turn-off time of 0.4 us. Ideal for automotive applications due to its CMOS technology and half bridge based interface IC type.

L293DNE

Texas Instruments

L293DNE by Texas Instruments is a 16-terminal peripheral driver with a max supply voltage of 36V. It features built-in transient and thermal protections, output current flow in both source and sink directions, and a turn-on time of 0.4us. Ideal for applications requiring precise control of motors or actuators in commercial temperature environments.

NCV8402ASTT1G

Onsemi

NCV8402ASTT1G by Onsemi is a small outline peripheral driver with built-in protections against transient, over current, and over voltage. It has a nominal output peak current limit of 4.8A and interface IC type as buffer or inverter based. Ideal for applications requiring sink output current flow direction in automotive electronics.

VNH5200ASTR-E

STMicroelectronics

VNH5200ASTR-E by STMicroelectronics is a half bridge peripheral driver with 16 terminals. It offers built-in protections for over voltage, thermal, and under voltage. With a max supply voltage of 18V and nominal output peak current limit of 8A, it is ideal for applications requiring source and sink current flow control.

NCP45521IMNTWG-H

Onsemi

NCP45521IMNTWG-H by Onsemi is a peripheral driver with max supply voltage of 5.5V, built-in protections for transient, over current, thermal & under voltage. It operates in industrial temperature range from -40 to 85 °C and has a small outline package style suitable for buffer or inverter based applications.

TPS22965DSGR

Texas Instruments

TPS22965DSGR by Texas Instruments is a Peripheral Driver with 8 terminals, operating b/w -40 to 105 °C. It has a supply voltage range of 2.5V to 5.7V and built-in transient protection. Ideal for industrial applications requiring source/sink current flow control in compact designs.

VN808CM-32-E

STMicroelectronics

STMicroelectronics' VN808CM-32-E is a peripheral driver with 8 functions, operating at 10.5-32V, offering thermal and under voltage protection. Ideal for automotive applications, it has a max supply voltage of 45V, turn-on time of 100us, and turn-off time of 150us.

FDC6330L

Fairchild Semiconductor

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: MILITARY; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: LSSOP; Package Shape: RECTANGULAR;

ULN2003AFWG

Toshiba

Toshiba's ULN2003AFWG is a 16-terminal peripheral driver with open-collector output, ideal for buffer or inverter-based applications. With a small outline package style and gull wing terminals, it offers standard input characteristics and inverted output polarity. This bipolar technology device features transient protection and sink current flow direction, making it suitable for various electronic designs.

BSP752RXUMA2

Infineon Technologies

BSP752RXUMA2 by Infineon is a Peripheral Driver with 8 terminals, MOS technology, and built-in protections against transient, over current, and over voltage. It operates b/w -40 to 85 °C with a supply voltage range of 6-52 V. Ideal for industrial applications requiring a small outline package style.

AUIPS6041GTR

Infineon Technologies

AUIPS6041GTR by Infineon is a peripheral driver with 28V max supply voltage, built-in transient and over current protections. It has 8 terminals, sink output current flow direction, and turn-on time of 15us. Ideal for automotive applications requiring buffer or inverter based peripheral drivers meeting AEC-Q100 standards.

PTPS272C45ARHFR

Texas Instruments

PTPS272C45ARHFR by Texas Instruments is a peripheral driver with 2 functions, operating voltage range of 6-36V, and built-in protections. It is used in automotive applications due to its high side driver feature and standard input characteristics. The chip carrier package style with very thin profile makes it suitable for compact designs.

BTS6163DPB

Infineon Technologies

BUFFER OR INVERTER BASED PERIPHERAL DRIVER;

BTS5210G

Infineon Technologies

BTS5210G by Infineon is a MOS technology peripheral driver with 2 functions, operating at 5.5-40V. It offers built-in protections against transient, over current, and over voltage. Ideal for automotive applications due to AEC-Q100 screening level and small outline package style.

BTS428L2ATMA1

Infineon Technologies

BTS428L2ATMA1 by Infineon is a 4-terminal peripheral driver with built-in protections for transient, over current, and over voltage. It operates at a nominal voltage of 12V with a max of 41V. With a turn-on/off time of 200us, it's ideal for applications requiring a sink output current flow direction in small outline packages.

ISO8200B

STMicroelectronics

ISO8200B by STMicroelectronics is a peripheral driver with built-in protections for transient, over current, and over voltage. It operates b/w -40 to 125 °C with a supply voltage range of 10.5-36 V, making it suitable for automotive applications requiring a nominal output peak current limit of 1.1 A.

IRS2186STRPBF

Infineon Technologies

IRS2186STRPBF by Infineon Technologies is a peripheral driver with a max supply voltage of 20V. It is used in automotive applications and offers built-in protections against transients and under voltage. Its turn-on and turn-off time is 0.25us, making it suitable for fast switching operations.

BTS141TCXT

Infineon Technologies

BTS141TCXT by Infineon Technologies is a peripheral driver with built-in protections for transient, over current, and over voltage. It has a nominal output peak current limit of 35A and turn-on time of 40us. This small outline package driver is ideal for applications requiring sink output current flow direction.

VNQ500PEPTR-E

STMicroelectronics

STMicroelectronics' VNQ500PEPTR-E is a 4-function peripheral driver with built-in protections for transient, over current, over voltage, thermal, and under voltage. It operates within a supply voltage range of 5.5V to 36V and has a compact package style suitable for various applications requiring source output current flow direction.