Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

SHT45-AD1B-R2

Manufacturer

Sensirion Ag
Manufacturer's Part Number

SHT45-AD1B-R2
Description

HUMIDITY AND TEMPERATURE SENSOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Output Type: DIGITAL VOLTAGE; Package Shape or Style: SQUARE; Body Height: .54 mm;
Datasheet

Datasheet

Not In Stock

Popular Products

LM358N

Onsemi

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

1N4148WS

Weitron Technology

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SMBJ18CA

Microsemi

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

E8WSDC12-32.768KTR

Abracon

Abracon's E8WSDC12-32.768KTR crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and communication systems.

Details

LL4148

Good-ark Electronics

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

BSS138NH6327XTSA2

Infineon Technologies

BSS138NH6327XTSA2 by Infineon is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for small signal applications. Operating in Enhancement Mode, it has 0.36W Power Dissipation and 3.5 ohm Drain-Source Resistance. With Gull Wing terminals and AEC-Q101 reference standard, it's suitable for automotive electronics due to its high temperature range of -55 to 150 °C.

Details

1554216002

Molex

WIRE AND CABLE;

Details

LL4148

International Semiconductor

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

NUP2105LT1G

Onsemi

NUP2105LT1G by Onsemi is a Transient Suppression Device with 350W power dissipation, 29.1V breakdown voltage, and 44V clamping voltage. Commonly used in electronic circuits for surge protection due to its bidirectional polarity and silicon diode element material.

Details

1N4148

Hitachi

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

BSS138-7-F

SPC TECHNOLOGY/ MULTICOMP

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain Current (ID): .2 A; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;

Details

ULN-2803A

Vishay Sprague

Vishay Sprague's ULN-2803A is an 8-bit peripheral driver with a max supply voltage of 3V. Featuring open-collector output characteristics, it offers built-in transient protections and operates b/w -20°C to 85°C. Ideal for applications requiring sink current flow direction, this rectangular-shaped driver has a terminal pitch of 2.54mm and turn-on/off time of 1us.

Details

BAV99

Micro Commercial Components

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BAV99

Vishay Intertechnology

Vishay Intertechnology's BAV99 diode features a max forward voltage of 1.3V and a max output current of 0.15A, making it ideal for rectification applications. With a small outline package style and dual terminal position, this series-connected diode is designed for surface mount usage in various electronic circuits with an operating temperature range from -55°C to 150°C.

Details

2N7002

Secos

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;

Details

BAV99

Good-ark Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM358MX

Fairchild Semiconductor

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

Details

RC0805FR-0710RL

Yageo

Yageo's RC0805FR-0710RL is a 10 ohm SMT fixed resistor with 1% tolerance and 0.125 W power dissipation. With a temperature range of -55 to 155 °C, it suits applications requiring precise resistance values in compact surface mount designs.

Details

LM358AN

Onsemi

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

1N4148WS

Vishay Intertechnology

Vishay Intertechnology's 1N4148WS is a single rectifier diode with a max forward voltage of 1V and output current of 0.15A. With a fast reverse recovery time of 0.004us, it operates up to 150°C. Ideal for applications requiring high-speed switching and low power consumption in surface mount configurations.

Details

SHT45-AD1B-R2 Technical Details

TYPE	DESCRIPTION
Minimum Supply Voltage:	1.08 V
Other Names:	1649-SHT45-AD1B-R2CT 3.000.645 1649-SHT45-AD1B-R2TR 1649-SHT45-AD1B-R2DKR
Package Body Material:	PLASTIC/EPOXY
Maximum Supply Voltage:	3.6 V
Output Type:	DIGITAL VOLTAGE
Minimum Operating Temperature:	-40 Cel
Mounting Feature:	SURFACE MOUNT
Body Width:	1.5 inch
Sensors or Transducers Type:	HUMIDITY AND TEMPERATURE SENSOR
No. of Terminals:	4
Package Equivalence Code:	SOLCC4,.06,32
Package Shape or Style:	SQUARE
Output (V):	DIGITAL
Body Height:	.54 mm
Body Length/Diameter:	1.5 mm
Maximum Operating Temperature:	125 Cel

Category Top Products

ACS733KMATR-65AB-T

Allegro MicroSystems

ACS733KMATR-65AB-T by Allegro MicroSystems is a current sensor with a max supply voltage of 3.46V and an output type of analog voltage. It is commonly used in automotive applications due to its AEC-Q100 screening level and surface mounting feature.

ISM330DHCX

STMicroelectronics

ISM330DHCX by STMicroelectronics is a 14-terminal accelerometer sensor with a supply voltage range of 1.71V to 3.6V. It offers digital output voltage ranging from 0.2V to 1.42V, suitable for applications requiring precise motion detection in various environments up to 105°C. This rectangular-shaped sensor, based on CMOS technology, is ideal for surface mount installations in compact devices where space is limited.

SHT40I-AD1B-R2

Sensirion Ag

HUMIDITY AND TEMPERATURE SENSOR;

G-MRCO-016

TE Connectivity

TE Connectivity's G-MRCO-016 is an angle sensor with 8 terminals, providing analog output at a max current of 1.6 mA. With a package body made of plastic/epoxy and dimensions of 2.5mm x 2.5 inch x 0.8 mm, it operates b/w -40 to 150 °C, suitable for surface mount applications in various industries.

D6F-50A6-000

Omron

Other Sensors/Transducers;

ACS773ECB-250B-PFF-NR-T

Allegro MicroSystems

CURRENT SENSOR;

TMCS1107A1UQDRQ1

Texas Instruments

TMCS1107A1UQDRQ1 by Texas Instruments is a current sensor with 8 terminals, operating voltage range of 3-5.5V, and AEC-Q100 screening for automotive applications. It offers analog voltage output, operates b/w -40 to 125°C, and features surface mounting in a rectangular package.

ACS722LLCTR-20AB-T

Allegro MicroSystems

CURRENT SENSOR;

ACS723LLCTR-10AB-T

Allegro MicroSystems

Allegro MicroSystems' ACS723LLCTR-10AB-T is a current sensor with 8 terminals, operating from -40 to 150°C. It offers analog voltage output, BICMOS technology, and a supply voltage range of 4.5V to 5.5V. Ideal for applications requiring precise current measurements in compact spaces.

TARS-LCASS

Honeywell Sensing And Control

TARS-LCASS by Honeywell is an ACCELEROMETER/GYROSCOPE sensor with a PBT body, 90.1mm diameter, and 18.5mm height. It operates b/w -40°C to 85°C, has a digital output, and requires a supply voltage of 4.5V to 5.5V. Ideal for applications requiring precise motion sensing in various environments.

MAX32664GTGD+T

Maxim Integrated

SENSOR/TRANSDUCER CIRCUIT; JESD-609 Code: e3; Terminal Finish: MATTE TIN;

HAFUHT0300L4AXT

Honeywell Sensing And Control

Honeywell Sensing And Control's HAFUHT0300L4AXT is a MASS AIR FLOW SENSOR with 3-10V supply voltage range, 3.5% accuracy, and digital output. Ideal for PANEL MOUNT applications, it operates b/w -20°C to 70°C temperatures with a compact body size of 71.4mm x 35 inch.

ACS732KLATR-65AU-T

Allegro MicroSystems

ACS732KLATR-65AU-T by Allegro MicroSystems is a current sensor with 16 terminals, operating voltage range of 4.75V to 5.25V, and AEC-Q100 screening level. It offers analog voltage output via open-drain configuration and is suitable for automotive applications due to its surface mounting feature and wide temperature range from -40°C to 125°C.

ACS72981LLRATR-050U5

Allegro MicroSystems

Allegro MicroSystems' ACS72981LLRATR-050U5 is a current sensor with 7 terminals, operating b/w -40°C to 150°C. It offers an analog voltage output, suitable for automotive applications due to AEC-Q100 screening and BICMOS technology. With a supply voltage range of 4.5V to 5.5V, it is designed in a rectangular package for surface mount assembly.

ACS780KLRTR-150U-T

Allegro MicroSystems

Allegro MicroSystems' ACS780KLRTR-150U-T is a current sensor with 7 terminals, operating from -40°C to 125°C. It provides analog voltage output at a max supply voltage of 5.5V and min of 4.5V. This rectangular surface-mount sensor in plastic/epoxy package is ideal for automotive applications due to AEC-Q100 screening level compliance.

MTCH108-I/GZ

Microchip Technology

SENSOR CONTROLLERS; Terminal Finish: MATTE TIN;

ZNI1000TA

Zetex Plc

Other Sensors/Transducers; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; JESD-609 Code: e3; Package Body Material: PLASTIC/EPOXY; Maximum Operating Temperature: 150 Cel;

KX134-1211

ROHM

ROHM's KX134-1211 is a 12-terminal accelerometer with a supply voltage range of 1.7V to 3.6V, outputting digital voltage from 0.40-1.60V. This silicon micromachine sensor operates b/w -40°C to 105°C, making it ideal for applications requiring precise digital acceleration measurements in compact spaces.

ACS72981KLRATR-150B5

Allegro MicroSystems

Allegro MicroSystems' ACS72981KLRATR-150B5 is a current sensor with 7 terminals, operating voltage range of 4.5V to 5.5V, and AEC-Q100 screening for automotive applications. It offers analog voltage output, BICMOS technology, and operates b/w -40°C to 125°C making it suitable for surface mount installations in various industries.

SEN55-SDN-T

Sensirion Ag

SENSOR MODULE;