Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

MC-40532.7680K-A0

Manufacturer

Seiko Epson
Manufacturer's Part Number

MC-40532.7680K-A0
Description

PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 100 ppm; Aging: 3 PPM/FIRST YEAR; Drive Level: 1 uW; Load Capacitance: 12.5 pF;
Datasheet

Datasheet

Not In Stock

Popular Products

LM107H

Linear Technology

LM107H by Linear Technology is an Operational Amplifier with a max input offset voltage of 3000uV, common mode reject ratio of 96dB, and min voltage gain of 50000. It is used in military applications due to its MILITARY temperature grade and BIPOLAR technology for precise signal processing in harsh environments.

Details

SMBJ18CA

Protek Devices

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148

Bytesonic Electronics

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

BAV99

Electronic Devices

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148

Digitron Semiconductors

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

1N4148

Kec

RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Non Repetitive Peak Forward Current: 2 A; Config: SINGLE; Maximum Operating Temperature: 200 Cel;

Details

ULN2803A

Motorola

NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Terminal Position: DUAL; JESD-30 Code: R-PDIP-T18;

Details

MBRM140T1G

Onsemi

MBRM140T1G by Onsemi is a Schottky rectifier diode with 40V max repetitive peak reverse voltage, 1A max output current, and 0.3V max forward voltage. It is used in applications requiring small outline surface mount diodes for efficient power management.

Details

BSS138-TP

Micro Commercial Components

BSS138-TP by Micro Commercial Components is a N-channel small signal FET with a min DS breakdown voltage of 50V and max drain current of 0.22A. It is commonly used in applications requiring enhancement mode operation, such as power management and switching circuits.

Details

RC0402FR-071KL

Yageo

The Yageo RC0402FR-071KL is a fixed resistor with a resistance of 1000 ohm and a tolerance of 1%. It is suitable for surface mount applications and has a max operating temperature of 155 °C.

Details

1N4148

Shanghai Lunsure Electronic Technology

RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Config: SINGLE;

Details

C0603C104K5RACAUTO

KEMET Corporation

KEMET C0603C104K5RACAUTO is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for automotive applications meeting AEC-Q200 standard, it comes in SMT package with matte tin finish and wraparound terminals.

Details

SMBJ18CA

International Semiconductor

TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;

Details

LM358D-T

NXP Semiconductors

LM358D-T by NXP Semiconductors is a dual operational amplifier with 70dB CMRR, 1000kHz unity gain bandwidth, and 9000uV max input offset voltage. Widely used in commercial applications due to its small outline package and low bias current of 0.5uA.

Details

1N4148WS

Rochester Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SS14

Jinan Jingheng Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SS14

Changzhou Starsea Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SS14

Frontier Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BAV99

Rfe International

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BAV99

Micro Commercial Components

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

MC-40532.7680K-A0 Technical Details

TYPE	DESCRIPTION
Load Capacitance:	12.5 pF
Frequency Tolerance:	100 ppm
Drive Level:	1 uW
Nominal Operating Frequency:	.032768 MHz
Frequency Stability:	144 %
Series Resistance:	50000 ohm
Aging:	3 PPM/FIRST YEAR
Physical Dimension:	9.6mm X 4.06mm X 3.6mm
Crystal or Resonator Type:	PARALLEL - FUNDAMENTAL
Maximum Operating Temperature:	85 Cel
Minimum Operating Temperature:	-40 Cel
Mounting Feature:	SURFACE MOUNT

Category Top Products

ABM3BAIG-8.000MHZ-1Z-T

Abracon

ABM3BAIG-8.000MHZ-1Z-T by Abracon is a 8 MHz crystal oscillator with 10 ppm frequency tolerance and 50% stability. Ideal for applications requiring precise timing in temperature range of -40 to 125 °C, such as IoT devices and communication systems.

8Y-19.200MEEQ-T

Txc

8Y-19.200MEEQ-T by Txc is a crystal oscillator with 10 ppm frequency tolerance and 10% stability, ideal for applications requiring precise timing. With a parallel-fundamental crystal type and 19.2 MHz operating frequency, it offers reliable performance in various electronic devices. Featuring surface mounting feature and compact dimensions of 2mm x 1.6mm x 0.5mm, it is suitable for space-constrained designs where size matters.

406I35E25M00000

Cts

Cts 406I35E25M00000 crystal oscillator offers 30 ppm frequency tolerance, 50% stability, and 40 ohm series resistance. Ideal for applications requiring a 25 MHz nominal operating frequency in parallel fundamental mode with gold over nickel terminal finish.

ABM3-13.560MHZ-B2-T

Abracon

ABM3-13.560MHZ-B2-T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 50% stability, and 60 ohm series resistance. Ideal for applications requiring precise timing at 13.56 MHz such as IoT devices and communication systems due to its compact surface mount design and low aging rate of 5 PPM/year.

ABM3B-12.000MHZ-22-D-3-W-T

Abracon

ABM3B-12.000MHZ-22-D-3-W-T by Abracon is a 12 MHz crystal oscillator with 25 ppm frequency tolerance and 25% stability. Ideal for applications requiring precise timing in temperature range of -40 to 85 °C, such as communication devices and industrial equipment.

ABM81-14.31818MHZ-B4Y-T3

Abracon

ABM81-14.31818MHZ-B4Y-T3 by Abracon is a 14.31818 MHz crystal oscillator with 30 ppm frequency tolerance and 30% stability. It operates b/w -20 to 70 °C, suitable for applications requiring precise timing in electronic devices. The surface mount design with gold over nickel finish makes it ideal for compact PCB layouts.

CX2016SA16000D0GSSCC

Kyocera

PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 15 ppm; Maximum Operating Temperature: 125 Cel; Physical Dimension: L2.05XB1.65XH0.45 (mm)/L0.081XB0.065XH0.018 (inch); Additional Features: AEC-Q200; TR;

ECS-.327-12.5--1210B-N-TR

Ecs International

ECS-0.327-12.5--1210B-N-TR by Ecs International is a 32.768 kHz crystal oscillator with 20 ppm frequency tolerance and 144% stability. Ideal for applications requiring precise timekeeping in compact devices due to its small size, surface mount feature, and low drive level of 1 uW.

ABM8AIG-20.000MHZ-4-T

Abracon

PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 30 ppm; Aging: 3 PPM/FIRST YEAR; Nominal Operating Frequency: 20 MHz; Additional Features: AT CUT; TR, 7 INCH; AEC-Q200 QUALIFIED;

CMR200T32768DZFT

Citizen Finedevice

Citizen Finedevice's CMR200T32768DZFT crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 50000 ohm series resistance. Ideal for applications requiring a 0.032768 MHz nominal operating frequency, such as IoT devices and wearables due to its compact 6mm x 2mm size and surface mounting feature.

ABM11W-16.0000MHZ-8-K1Z-T3

Abracon

ABM11W-16.0000MHZ-8-K1Z-T3 by Abracon is a 16 MHz crystal oscillator with 10 ppm frequency tolerance and 50% stability. Ideal for applications requiring precise timing, it operates b/w -40°C to 125°C and features a compact surface-mount design.

FC-13532.7680KA-A5

Seiko Epson

FC-13532.7680KA-A5 by Seiko Epson is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as in telecommunications equipment or industrial automation systems. Operating temperature ranges from -40 to 85 °C with GOLD OVER NICKEL terminal finish.

MS1V-T1K32.768KHZ7PF+/-20PPMTAQCAU

Micro Crystal Ag

MS1V-T1K32.768KHZ7PF+/-20PPMTAQCAU by Micro Crystal Ag is a 32.768 kHz crystal oscillator with 20 ppm frequency tolerance and 126% stability. Ideal for applications requiring precise timing in temperature ranges from -40 to 85°C, featuring gold terminal finish and surface mounting feature.

ABM7-20.000MHZ-D-2-Y-T

Abracon

ABM7-20.000MHZ-D-2-Y-T by Abracon is a 20 MHz crystal oscillator with 20 ppm frequency tolerance and 30% stability. Ideal for applications requiring precise timing, such as telecommunications equipment or industrial automation systems.

FA-23825.0000MB-C0

Seiko Epson

FA-23825.0000MB-C0 by Seiko Epson is a crystal oscillator with 25 MHz nominal frequency, 50 ppm tolerance, and 30% stability. Ideal for applications requiring precise timing in temperature range of -20 to 70 °C, such as telecommunications equipment or industrial automation systems.

ABM8-25.000MHZ-D2Y-T

Abracon

ABM8-25.000MHZ-D2Y-T by Abracon is a 25 MHz crystal oscillator with 20 ppm frequency tolerance and 30% stability. Ideal for applications requiring precise timing in temperature range of -40 to 85 °C, such as telecommunications equipment and industrial automation systems.

ECS-.327-6-12-TR

Ecs International

ECS-0.327-6-12-TR by Ecs International is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 90000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in temperatures ranging from -40 to 85 °C. Suitable for surface mount setups due to its compact L2.0XB1.2XH0.6 (mm) size.

ECS-.327-12.5-16-TR

Ecs International

ECS-0.327-12.5-16-TR by Ecs International is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 90000 ohm series resistance. Ideal for applications requiring precise timing in temperature ranges from -40 to 85 °C, such as IoT devices and wearables due to its compact size of 1.6mm x 1.0mm x 0.5mm and surface mount feature.

ATS120BSM-1E

Cts

PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 30 ppm; Aging: 5 PPM/YEAR; Physical Dimension: 11.1mm X 4.83mm X 4.3 mm; Additional Features: AT CUT;

R26-32.768-12.5-SMD-TR

Raltron Electronics

Raltron Electronics' R26-32.768-12.5-SMD-TR crystal oscillator offers 20 ppm frequency tolerance, 42% stability, and 35000 ohm series resistance. Ideal for applications requiring a 0.032768 MHz nominal operating frequency, such as IoT devices and wearables due to its compact size of 1.9mm x 6.1mm and surface mounting feature.