Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

ECS-110.5-20-5G3XDS-TR

Manufacturer

Ecs International
Manufacturer's Part Number

ECS-110.5-20-5G3XDS-TR
Description

PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 30 ppm; Aging: 5 PPM/YEAR; Frequency Stability: 100 %; Minimum Operating Temperature: -40 Cel;
Datasheet

Datasheet

Not In Stock

Popular Products

FDN306P

Onsemi

FDN306P by Onsemi is a P-CHANNEL FET with 12V DS Breakdown Voltage, ideal for SWITCHING applications. It features SINGLE configuration with BUILT-IN DIODE and GULL WING terminals. Operating in ENHANCEMENT MODE, it has a max ID of 2.6A and 0.04 ohm RDS(on), suitable for small outline packages at temperatures ranging from -55 to 150°C.

Details

FT232RL-TUBE

FTDI

FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.

Details

SMBJ18CA

Jgd Semiconductors

TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V;

Details

AB26TRB-32.768KHZ--T

Abracon

AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.

Details

ECA2DHG4R7

Panasonic

ECA2DHG4R7 by Panasonic is a 4.7uF aluminum electrolytic capacitor with 200V rated DC voltage. It features tan delta of 0.15, leakage current of 0.0664mA, and ripple current of 50mA, making it ideal for applications requiring high capacitance stability and low leakage in through-hole mounting setups at temperatures ranging from -25 to 105°C.

Details

BAV99

Allegro MicroSystems

RECTIFIER DIODE; Terminal Position: END; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SMBJ18CA

General Semiconductor

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

261

Micronetics

Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;

Details

2N7002

Diodes Incorporated

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Form: GULL WING; JESD-30 Code: R-PDSO-G3;

Details

C1206C104M5RACTU

KEMET Corporation

KEMET C1206C104M5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±20% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.

Details

2N2222A

Hi-tron Semiconductor

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

LM358DT

STMicroelectronics

LM358DT by STMicroelectronics is a dual operational amplifier with a max input offset voltage of 9000 uV. It operates at a nominal voltage of 5V and has a min voltage gain of 25000. This amplifier is commonly used in applications requiring high precision and low power consumption.

Details

NE555DR

Texas Instruments

NE555DR by Texas Instruments is an Analog Waveform Generation IC with 8 terminals, operating voltage of 5V, and power supplies ranging from 5-15V. It is a versatile component for pulse generation applications due to its small outline package and commercial temperature grade suitability.

Details

1N4148WT

Formosa Microsemi

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

ULN-2803A

Vishay Sprague

Vishay Sprague's ULN-2803A is an 8-bit peripheral driver with a max supply voltage of 3V. Featuring open-collector output characteristics, it offers built-in transient protections and operates b/w -20°C to 85°C. Ideal for applications requiring sink current flow direction, this rectangular-shaped driver has a terminal pitch of 2.54mm and turn-on/off time of 1us.

Details

FDN306P

Fairchild Semiconductor

P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Maximum Drain Current (Abs) (ID): 2.6 A; Operating Mode: ENHANCEMENT MODE;

Details

MBR0520LT1

Motorola

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148

NXP Semiconductors

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

LM358DR2G

Onsemi

LM358DR2G by Onsemi is a dual operational amplifier with 7000uV max input offset voltage and 70dB nominal CMRR. Ideal for applications requiring low bias current such as sensor interfaces, signal conditioning circuits, and audio amplifiers. Package style: Small Outline, Technology: Bipolar, Unity Gain Bandwidth: 1000 kHz.

Details

DRV5053VAQLPG

Texas Instruments

Texas Instruments DRV5053VAQLPG is a magnetic field sensor with 2.5-38V supply voltage range, -40 to 125°C operating temperature, and 0-2V output. Ideal for applications requiring Hall effect sensors like automotive, industrial automation, and robotics due to its compact size (1.52" x 4mm) and high output current capability of 2.3A.

Details

ECS-110.5-20-5G3XDS-TR Technical Details

TYPE	DESCRIPTION
Load Capacitance:	20 pF
Frequency Tolerance:	30 ppm
Frequency Stability:	100 %
Series Resistance:	50 ohm
Terminal Finish:	Tin (Sn) - with Nickel (Ni) barrier
JESD-609 Code:	e3
Minimum Operating Temperature:	-40 Cel
Mounting Feature:	SURFACE MOUNT
Drive Level:	500 uW
Nominal Operating Frequency:	11.0592 MHz
Aging:	5 PPM/YEAR
Physical Dimension:	11.4mm x 4.7mm x 4.2mm
Crystal or Resonator Type:	PARALLEL - FUNDAMENTAL
Maximum Operating Temperature:	125 Cel

Category Top Products

CX5032GB24000H0PESZZ

Kyocera

Kyocera's CX5032GB24000H0PESZZ crystal oscillator operates at 24 MHz with 50% frequency stability. It features a series resistance of 100 ohm and load capacitance of 12 pF, suitable for surface mount applications in temperature range -10 to 70°C.

MP040-E

Cts

The Cts MP040-E is a crystal oscillator with a frequency tolerance of 30 ppm and frequency stability of 50%. It is commonly used in applications requiring a nominal operating frequency of 4 MHz, such as electronic devices and communication systems.

ATS049A

Cts

ATS049A by Cts is a crystal oscillator with 30 ppm frequency tolerance, 50% stability, and 120 ohm series resistance. Ideal for applications requiring precise timing at 4.9152 MHz, it operates b/w -20 to 70 °C with low aging of 5 PPM/YEAR.

ABM3B-26.000MHZ-10-1-U-T

Abracon

ABM3B-26.000MHZ-10-1-U-T by Abracon is a crystal oscillator with 26MHz frequency, 10ppm tolerance, and 10% stability. Ideal for applications requiring precise timing in electronics due to its high accuracy and low aging rate of 5PPM/yr.

ATS12A

Cts

The Cts ATS12A crystal oscillator operates at 12 MHz with a frequency tolerance of 30 ppm and stability of 50%. Ideal for applications requiring precise timing, it features a parallel fundamental type, through-hole mounting, and low aging rate of 5 PPM/year.

FOXSDLF/080-20-T1

Fox Electronics

FOXSDLF/080-20-T1 by Fox Electronics is an 8 MHz crystal oscillator with 30 ppm frequency tolerance and 50% stability. Ideal for applications requiring precise timing, it operates b/w -20 to 70 °C, featuring a load capacitance of 20 pF and surface mounting feature.

ABL-8.000MHZ-B2

Abracon

Abracon ABL-8.000MHZ-B2 crystal oscillator operates at 8 MHz with 20 ppm frequency tolerance and 50% stability. Ideal for applications requiring precise timing, such as in communication systems or industrial automation. Features include 80 ohm series resistance, -20 to 70 °C operating temperature range, and compact L11.5XB5.0XH3.5 mm size.

NKS7-120-20

Pericom Semiconductor

NKS7-120-20 by Pericom Semiconductor is a 12 MHz crystal oscillator with 50 ppm frequency tolerance and 50% stability. Ideal for applications requiring precise timing, it features a surface mount design, gold terminal finish, and operates b/w -20°C to 70°C temperature range.

ECS-120-20-3X-TR

Ecs International

ECS-120-20-3X-TR by Ecs International is a crystal oscillator with a frequency tolerance of 30 ppm and frequency stability of 50%. It is commonly used in applications requiring a nominal operating frequency of 12 MHz, such as communication systems and electronic devices.

SC32S-7PF20PPM

Seiko Instruments Usa

SC32S-7PF20PPM by Seiko Instruments Usa is a crystal oscillator with 20 ppm frequency tolerance, 70000 ohm series resistance, and 0.032768 MHz nominal operating frequency. Ideal for applications requiring precise timing in temperature-sensitive environments.

CM315DL32768DZFT

Citizen Finedevice

Citizen Finedevice's CM315DL32768DZFT crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing at a frequency of 0.032768 MHz, such as in telecommunications and industrial automation systems.

ABM12W-25.0000MHZ-8-B1U-T3

Abracon

Abracon's ABM12W-25.0000MHZ-8-B1U-T3 crystal oscillator operates at 25 MHz with 10 ppm frequency tolerance and 10% stability. Ideal for applications requiring precise timing, it features a parallel fundamental type, -20 to 70 °C operating range, and surface mounting.

ECS-.327-12.5-49--TR

Ecs International

ECS-0.327-12.5-49--TR by Ecs International is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring 0.032768 MHz frequency, it operates b/w -40 to 85 °C with gold-nickel terminal finish in a compact 4.1mm x 1.5mm x 0.9mm surface mount package.

ABLS-27.000MHZ-B-2-F-T

Abracon

ABLS-27.000MHZ-B-2-F-T by Abracon is a 27 MHz crystal oscillator with 20 ppm frequency tolerance and 50% stability. Ideal for applications requiring precise timing, it operates b/w -20 to 70 °C and features a parallel resonator type with matte tin finish.

ABLS-12.000MHZ-20-D-3-H-T

Abracon

ABLS-12.000MHZ-20-D-3-H-T by Abracon is a crystal oscillator with 12MHz frequency, 25 ppm tolerance, and 35% stability. Ideal for applications requiring precise timing in electronics, telecommunications, and industrial automation due to its compact size and surface mount feature.

ABLS-12.000MHZ-16-A-4-H-T

Abracon

ABLS-12.000MHZ-16-A-4-H-T by Abracon is a 12MHz crystal oscillator with 30ppm frequency tolerance and 35% stability. Ideal for applications requiring precise timing, it operates b/w -10°C to 60°C and features a parallel-fundamental crystal type.

NX5032GA-8.000M-STD-CSU-1

Nihon Dempa Kogyo

NX5032GA-8.000M-STD-CSU-1 by Nihon Dempa Kogyo is an 8 MHz crystal oscillator with 50 ppm frequency tolerance and 150% stability. Ideal for applications requiring a surface mount, it operates b/w -40 to 150 °C, with a drive level of 10 uW.

R26-32.768-12.5

Raltron Electronics

Raltron Electronics' R26-32.768-12.5 crystal oscillator offers 20 ppm frequency tolerance, 42% stability, and 35000 ohm series resistance. Ideal for applications requiring precise timing at a frequency of 0.032768 MHz, such as in telecommunications and industrial automation systems.

ABS10-32.768KHZ-9-T

Abracon

Abracon's ABS10-32.768KHZ-9-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 70000 ohm series resistance. Ideal for applications requiring a 0.032768 MHz nominal operating frequency, such as IoT devices and wearables due to its compact size and low power consumption.

445W2XJ25M00000

Cts

The Cts 445W2XJ25M00000 crystal oscillator offers a frequency tolerance of 20 ppm and stability of 15%. With a nominal operating frequency of 25 MHz, it is ideal for applications requiring precise timing such as telecommunications equipment and industrial automation systems. The surface mount design and gold over nickel terminal finish make it suitable for compact electronic devices.