Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

FFSD-10-D-12.00-01-N

Manufacturer

Samtec
Manufacturer's Part Number

FFSD-10-D-12.00-01-N
Description

CABLE ASSEMBLY; Connector Side-1: SOCKET; Connector Side-2: SOCKET; Rated Current: 2.3 A; Shielding: NO; Stranding: 7X38;
Datasheet

Datasheet

Not In Stock

Popular Products

SMBJ18CA

Leshan Radio

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

MMBT3904LT1G

Onsemi

MMBT3904LT1G by Onsemi is a NPN BJT with max. collector-emitter voltage of 40V, hFE of 30, and fT of 300MHz. Ideal for small signal applications in electronics due to its compact size, high transition frequency, and low power dissipation capabilities.

Details

LM2675M-ADJ/NOPB

Texas Instruments

LM2675M-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with 1A output current, 37V max output voltage, and 260kHz max switching frequency. Ideal for automotive applications due to its -40°C to 125°C operating temperature range and compact small outline package design.

Details

FDN5618P

Fairchild Semiconductor

P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Transistor Element Material: SILICON; Moisture Sensitivity Level (MSL): 1;

Details

LM317T

Texas Instruments

LM317T by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. Operating temperature ranges from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. With a max output current of 1.5A, this through-hole package regulator is ideal for power supply designs where adjustable voltage levels are needed.

Details

ERJ3GEY0R00V

Panasonic

ERJ3GEY0R00V by Panasonic is a SMT fixed resistor with 0 ohm resistance, suitable for jumper applications. It features a metal glaze/thick film technology, rated for temperatures b/w -55 to 155 °C. With a compact rectangular construction and matte tin over nickel terminal finish, it is ideal for surface mount installations in various electronic devices.

Details

1N4148WS

Weitron Technology

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BAV99

Vishay Intertechnology

Vishay Intertechnology's BAV99 diode features a max forward voltage of 1.3V and a max output current of 0.15A, making it ideal for rectification applications. With a small outline package style and dual terminal position, this series-connected diode is designed for surface mount usage in various electronic circuits with an operating temperature range from -55°C to 150°C.

Details

2N7002

Formosa Microsemi

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Maximum Drain Current (Abs) (ID): .115 A;

Details

USB3320C-EZK-TR

Standard Microsystems

INTERFACE CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;

Details

NE555D

STMicroelectronics

PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;

Details

LM358M

Raytheon Semiconductor

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

Details

2N7002

Yangzhou Yangjie Electronics

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 1; Terminal Form: GULL WING; Maximum Drain Current (ID): .34 A;

Details

350766-1

TE Connectivity

TE Connectivity 350766-1 is a rectangular power connector with 0.25" mating contact pitch, rated for 600V and operating temperatures from -55 to 105°C. It has a durable design with POLYAMIDE insulator material, suitable for commercial applications requiring secure crimp termination in cable mounting setups.

Details

1N4148

General Semiconductor

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

1N4148

Wuxi Xuyang Electronic

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

LM555CM

Intersil

Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;

Details

BAV99

Rectron

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BSS138-TP

Micro Commercial Components

BSS138-TP by Micro Commercial Components is a N-channel small signal FET with a min DS breakdown voltage of 50V and max drain current of 0.22A. It is commonly used in applications requiring enhancement mode operation, such as power management and switching circuits.

Details

MMSZ5245BT1G

Onsemi

MMSZ5245BT1G by Onsemi is a Zener diode with 15V nominal reference voltage, 8.5mA test current, and 16 ohm dynamic impedance. It is used in applications requiring precise voltage regulation in a compact SMD package for temperatures ranging from -55 to 150°C.

Details

FFSD-10-D-12.00-01-N Technical Details

TYPE	DESCRIPTION
Wire Gauge (AWG):	30
Construction:	STRANDED
Connector Side-1:	SOCKET
Connector Side-2:	SOCKET
IEC Conformity:	NO
Approvals (V):	UL
Shielding:	NO
Minimum Operating Temperature:	-40 Cel
Cross Section Area:	.0509 mm2
Conductor Finish:	TIN
MIL Conformity:	NO
Length:	.305 mm
Wire & Cable Name:	FLAT CABLE
Connector Accessory Type:	CABLE ASSEMBLY
Insulator Material:	POLYVINYL CHLORIDE
No. of Conductors:	20
Additional Features:	LOW PROFILE, TIGER EYE
Maximum Operating Temperature:	105 Cel
Rated Current:	2.3 A
Application:	HIGH RELIABILITY
DIN Conformity:	NO
Stranding:	7X38

Category Top Products

45-306

Gc Electronics

CABLE ASSEMBLY; Connector Side-1: DB9 MALE; Connector Side-2: DB9 FEMALE; Shielding: NO; Wire Gauge (AWG): 28; No. of Conductors: 9;

3051/1SL001

Alpha Wire

Alpha Wire 3051/1SL001 is a CSA/UL approved solid wire with tin finish. Rated for 300V, it has PVC insulation and operates b/w -40 to 105°C. Ideal for flexible cords and fixtures due to its copper alloy conductor, 0.326 mm2 cross-section area, and 0.055 ohm resistance.

19034

Helukabel

WIRE AND CABLE;

ASPUDSPUD22K305

J S T Mfg

ASPUDSPUD22K305 by J S T Mfg is a UL approved electrical wire with 22 AWG, rated for 250V and 3A. Ideal for flexible cord and fixture wire applications due to its 0.326 mm2 cross-section area and PUD CONTACT connectors on both sides.

115101-20-72.00

Amphenol

CABLE ASSEMBLY;

1110051020

Molex

CABLE ASSEMBLY;

2205306-1

TE Connectivity

TE Connectivity 2205306-1 wire is designed for power and signal applications with 7 conductors. It has a rated voltage of 200V, insulator material POLYESTER, and can operate b/w -40 to 105°C. Ideal for use in electrical systems requiring a max current of 1.6A with wire gauge up to 28 AWG.

44A0111-20-6-US

TE Connectivity

WIRE AND CABLE;

55A0111-16-9

TE Connectivity

TE Connectivity's 55A0111-16-9 wire is a CSA, CAA, MIL, UL approved stranded cable with a rated voltage of 600V. Featuring a tin finish and copper alloy conductor material, it operates b/w -65°C to 150°C. Ideal for applications requiring flexible cord and fixture wire such as SPEC 55 cables.

3365/20

3m Electronic Products Division

The 3m Electronic Products Division 3365/20 is a UL-approved FLAT FLEXIBLE CABLE with 20 conductors of TINNED COPPER. Featuring STRANDED construction, it has a rated voltage of 300V and operates b/w -20 to 105°C. Ideal for applications requiring flexibility and durability in electrical wiring setups.

M16878/6BDE-9

Weico Wire & Cable

WIRE AND CABLE; Rated Voltage: 250 V; Shielding: NO; Minimum Operating Temperature: -60 Cel; Length: 30.48 mm; Maximum Operating Temperature: 200 Cel;

24450

Helukabel

WIRE AND CABLE; Rated Voltage: 300 V; Shielding: NO; Wire Gauge (AWG): 20; Wire & Cable Name: FLEXIBLE CORD AND FIXTURE WIRE; Insulator Material: POLYPROPYLENE;

44A1121-24-0/9-9

TE Connectivity

TE Connectivity's 44A1121-24-0/9-9 cable is a stranded wire with radiation-crosslinked modified PVF jacket, shielding, and tin conductor finish. It has a rated voltage of 600V, operates b/w -65 to 150°C, and features copper alloy conductors in 24 AWG size. Ideal for flexible cord and fixture wire applications.

13230

Helukabel

Helukabel 13230 is a stranded wire with polymer jacket, rated at 600V. With approvals from BS, CUL, DIN, IEC, UL, VDE it's ideal for fixed installations. Featuring bare copper conductor and operating temperatures from -40 to 80°C, it's suitable for various electrical applications.

34123

Helukabel

WIRE AND CABLE;

P569-016

Tripp Lite

CABLE ASSEMBLY;

2273116-4

TE Connectivity

TE Connectivity's 2273116-4 is a 22 AWG communication cable with a rated voltage of 250V. It operates b/w -40°C to 80°C, supporting up to 4A current. Ideal for applications requiring reliable electrical connections in various environments.

PMHDMF-5

Infinite Electronics International

CABLE ASSEMBLY;

3365/16-100SF

3m Electronic Products Division

3M 3365/16-100SF is a FLAT FLEXIBLE CABLE with 7 STRANDED conductors, TIN finish, and UL/CUL approvals. Rated for 300V, AWG 28 gauge, it's ideal for electrical wiring in compact spaces like electronics or appliances.

55A0111-14-0

TE Connectivity

TE Connectivity 55A0111-14-0 is a CSA, CAA, MIL, UL approved stranded wire with 600V rating. Featuring tin finish copper alloy conductor, it operates b/w -65 to 150°C. Ideal for flexible cord and fixture wire applications due to its 14 AWG size and SPEC 55 cable type.