Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

1952047

Manufacturer

Phoenix Contact
Manufacturer's Part Number

1952047
Description

BARRIER STRIP TERMINAL BLOCK; Mounting Type: CONNECTOR; Fastening Method: SPRING LOADED; Additional Features: PA, UL 94V-0; Wire Gauge: 16 AWG; Voltage (Rated): 160 V;
Datasheet

Datasheet

Not In Stock

Popular Products

OPA2227UA

Burr-Brown Corporation

OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

Details

M24308/2-1F

TE Connectivity

TE Connectivity's M24308/2-1F D-Sub Connector features 9 contacts, 2 rows, and a shell size of 1/E. With a rated current of 7.5A, it operates b/w -55°C to 125°C. Ideal for cable mounting applications, this connector has a steel shell with cadmium finish and uses crimp termination for female contact pins.

Details

FDC5614P

Onsemi

FDC5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 20A Max IDM and 0.105 ohm RDS(ON), operating in ENHANCEMENT MODE at -55 to 150 °C. This SMALL OUTLINE transistor has a built-in diode, GULL WING terminals, and METAL-OXIDE SEMICONDUCTOR technology.

Details

1N4148WS

Diotec Semiconductor Ag

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N2222A

NXP Semiconductors

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Operating Temperature: 150 Cel;

Details

STM32F103C8T6

STMicroelectronics

STM32F103C8T6 by STMicroelectronics is a 32-bit microcontroller with 48 terminals, operating at up to 16 MHz. It features 10-Ch 12-Bit ADC channels and 7 DMA channels, suitable for industrial applications requiring low power consumption and high-speed connectivity via CAN, I2C(2), SPI(2), USART(3), USB.

Details

MC33269T-3.3G

Onsemi

MC33269T-3.3G by Onsemi is a fixed positive single output LDO regulator with a max output current of 0.8 A and a dropout voltage of 1.35 V. It is commonly used in applications that require stable voltage regulation, such as power supplies for electronic devices.

Details

2N2222A

Semicoa

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

SMBJ18CA

Changzhou Galaxy Century Microelectronics

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LIS3DHTR

STMicroelectronics

LIS3DHTR by STMicroelectronics is a 16-terminal accelerometer with output range of 0.18-1.62V, ideal for motion sensing applications. Operating temperature ranges from -40 to 85°C, making it suitable for various environments. With a compact square package body of 3x3mm and digital voltage output type, it is commonly used in surface mount designs.

Details

2N7002,215

NXP Semiconductors

2N7002,215 by NXP Semiconductors is a small signal N-CHANNEL FET with a min DS breakdown voltage of 60V and max drain current of 0.3A. It is used for switching applications in enhancement mode, operates b/w -65 to 150 °C, and has a max power dissipation of 0.2W.

Details

2N7002

Siliconix

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain Current (ID): .115 A; Operating Mode: ENHANCEMENT MODE;

Details

LL4148

Weitronic Enterprise

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

LM555CM

Texas Instruments

LM555CM by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V and max operating temperature of 70°C. It comes in a small outline package, suitable for applications requiring pulse generation or rectangular waveform outputs. With surface mount capability and low supply current of 15mA, it is ideal for commercial-grade electronic circuits.

Details

NE555DR

Texas Instruments

NE555DR by Texas Instruments is an Analog Waveform Generation IC with 8 terminals, operating voltage of 5V, and power supplies ranging from 5-15V. It is a versatile component for pulse generation applications due to its small outline package and commercial temperature grade suitability.

Details

ISO1050DUBR

Texas Instruments

ISO1050DUBR by Texas Instruments is a network interface IC with 8 terminals, operating from -55 to 105°C. It features a small outline package, nickel palladium gold finish, and gull wing terminal form. Ideal for telecom applications requiring a 5V supply voltage and peak reflow temperature of 260°C.

Details

1N4148

Jgd Semiconductors

RECTIFIER DIODE; Surface Mount: NO; Maximum Operating Temperature: 175 Cel; Maximum Reverse Recovery Time: .004 us; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V;

Details

NE555D

Philips Semiconductors

Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;

Details

BSS138

Siemens

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain-Source On Resistance: 3.5 ohm; Terminal Finish: Tin/Lead (Sn/Pb);

Details

LM358ADR

Texas Instruments

LM358ADR by Texas Instruments is an operational amplifier with 2 functions, featuring a max input offset voltage of 5000 uV and nominal voltage of 5V. Widely used in applications requiring high voltage gain, it operates within a temperature range of 0-70°C and offers frequency compensation for stability.

Details

1952047 Technical Details

TYPE	DESCRIPTION
Mounting Style:	Connector
Other Names:	FMC154ST35RF 1952047-ND FMC1.5/4-ST-3.5-RF 277-9095
Total Ways:	4
Total Rows:	1
Fastening Style:	Spring Loaded
Wire Gauge:	16 AWG
Total Decks:	1
Rated Voltage:	160 V
Wire Cross Section:	1.5 mm²
Product Type:	Barrier Strip Terminal Block
Safety Compliance:	UL
Additional Features:	PA, UL 94V-0
Rated Current:	8 A

Category Top Products

2005-7642

Wago

MODULAR TERMINAL BLOCK;

1546670-3

Tyco Electronics Elcon

BARRIER STRIP TERMINAL BLOCK; Mounting Type: CABLE AND PANEL; Fastening Method: SCREW; Additional Features: STANDARD: UL94V-0, THERMOPLASTIC; Wire Gauge: 14 AWG; Voltage (Rated): 300 V;

1757019

Phoenix Contact

The Phoenix Contact 1757019 is a Barrier Strip Terminal Block with UL and CSA safety approvals. It supports wire gauge up to 12 AWG and rated voltage of 250V, making it ideal for industrial applications requiring secure connections. With a current rating of 12A and fastening method via connector, it offers reliable performance in various electrical setups.

9-160481-1

Tyco Electronics Amp

PUSH-ON TERMINAL; Additional Features: NYLON; Wire Gauge: 16 AWG; Voltage (Rated): 300 V; Safety Approval: UL; Wire Cross Section: 1.5 mm2;

51863-1

Tyco Electronics Amp

RING TERMINAL; Wire Gauge: 16 AWG; Voltage (Rated): 300 V; Wire Cross Section: 1.42 mm2; Safety Approval: UL; No. of Ways: 1;

640903-1

TE Connectivity

TE Connectivity's 640903-1 is a UL-approved PUSH-ON TERMINAL for 18 AWG wire with a rated voltage of 300V. Featuring a 0.96 mm2 wire cross section, this FEMALE terminal block is ideal for various electrical applications.

796644-2

TE Connectivity

TE Connectivity 796644-2 is a BOARD mount STRIP TERMINAL BLOCK with UL approval. It supports 12 AWG wire, rated for 300V and 15A current. Ideal for applications requiring secure CONNECTOR fastening in electrical systems up to 300V.

19002-0024

Molex

PUSH-ON TERMINAL; Wire Gauge: 14 AWG; Wire Cross Section: 2 mm2; Terminal Gender: FEMALE;

2-32994-1

TE Connectivity

TE Connectivity's 2-32994-1 is a UL-approved RING TERMINAL for 10 AWG wire with a 6 mm2 cross section. It is a FEMALE terminal suitable for various applications in Terminals & Terminal Blocks category.

MC1,5/2-ST-3,81

Phoenix Contact

Phoenix Contact's MC1,5/2-ST-3,81 is a 2-way barrier strip terminal block with a rated voltage of 160V and current of 8A. It supports wire gauge up to 16 AWG and wire cross-section of 1.5mm², making it ideal for industrial applications requiring secure connections in tight spaces. The terminal block is approved by CB, CSA, CUL, EAC, UL, and VDE for safety compliance.

1005

Ntt

TAB TERMINAL;

1-1776263-5

Tyco Electronics Amp

BARRIER STRIP TERMINAL BLOCK; Mounting Type: BOARD; Fastening Method: SCREW; Additional Features: STANDARD: UL94V-0, POLYAMIDE/ POLYESTER; Wire Gauge: 16 AWG; Voltage (Rated): 300 V;

4622-0-15-01-30-27-10-0

Mill-max Mfg

PCB TERMINAL; Terminal Gender: FEMALE;

2-320569-3

TE Connectivity

TE Connectivity 2-320569-3 is a UL-approved RING TERMINAL for 10 AWG wire, rated at 300V. With a wire cross section of 6 mm2, it is ideal for female terminals in various electrical applications.

1787111

Phoenix Contact

Phoenix Contact 1787111 is a 2-row barrier strip terminal block with 12 ways. Rated for 160V and 8A, it has CB, CUL, UL, VDE safety approvals. Ideal for board and panel mounting applications due to its connector fastening method.

MS25036-105

Amphenol Communications Solutions

RING TERMINAL; Additional Features: NYLON; Wire Gauge: 18 AWG; Voltage (Rated): 600 V; Safety Approval: CSA; UL; Wire Cross Section: 1.5 mm2;

733-366

Wago

Wago 733-366 is a STRIP TERMINAL BLOCK with 6 ways, rated for 150V and 4A. It uses CONNECTOR fastening method and holds safety approvals from ABS, CCA, CSA, DNVGL, EN, IEC. Ideal for BOARD mounting applications in various industries.

3-520106-2

TE Connectivity

TE Connectivity 3-520106-2 TAB TERMINAL is a UL approved male terminal block for 14 AWG wire with 600V rating. Ideal for applications requiring secure connections with 2.08 mm² wire cross section.

1729128

Phoenix Contact

The Phoenix Contact 1729128 is a BARRIER STRIP TERMINAL BLOCK with 2 ways, rated for 13.5A current and 400V voltage. It has safety approvals from CB, CCA, CSA, CUL, EAC, GL and uses SCREW fastening method. Ideal for BOARD mounting applications with wire gauge up to 16 AWG and wire cross section of 1.5 mm2.

1952047

Phoenix Contact

The Phoenix Contact 1952047 is a UL-approved barrier strip terminal block with 1 row and 4 ways. It has a rated voltage of 160V, can handle up to 8A current, and supports wire gauge up to 16 AWG. This connector is commonly used in applications requiring secure electrical connections and easy installation.