Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

FSD77-8-D

Manufacturer

Panduit
Manufacturer's Part Number

FSD77-8-D
Description

TERMINAL BLOCK ACCESSORY; Maximum Wire Size: 18 AWG; DIN Conformity: YES; Insulator Material: POLYPROPYLENE; Approvals (V): CSA; Assembly Item Name: FERRULE;
Datasheet

Datasheet

Not In Stock

Popular Products

2N7002

Vishay Intertechnology

2N7002 by Vishay Intertechnology is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE, suitable for surface mount with GULL WING terminals.

Details

U.FL-R-SMT-1(10)

Hirose Electric

U.FL-R-SMT-1(10) by Hirose Electric is a RF connector with 50 ohm impedance, 0.05 dB insertion loss, and 8 GHz operating frequency. Ideal for board mounting in commercial applications, it features gold termination finish, liquid crystal polymer insulator, and 200VAC dielectric voltage resistance.

Details

LL4148

Panjit International

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

SMBJ18CA

Thinking Electronic Industrial

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N2222A

Vishay Sprague

NPN; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JEDEC-95 Code: TO-18; Maximum Collector-Emitter Voltage: 40 V;

Details

AMS1117-3.3

Advanced Monolithic Systems

AMS1117-3.3 by Advanced Monolithic Systems is a fixed positive single output LDO regulator with 1A max output current, 3% voltage tolerance, and 1.3V dropout voltage. Ideal for applications requiring stable 3.3V supply in compact designs due to its small outline package and excellent load regulation of 0.025%.

Details

LM317T

STMicroelectronics

ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-XSFM-T3; Minimum Input-Output Voltage Differential: 3 V;

Details

SS14

Microsemi

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N7002

Formosa Microsemi

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Maximum Drain Current (Abs) (ID): .115 A;

Details

BAV99LT1G

Onsemi

BAV99LT1G by Onsemi is a series connected diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.006 us and can handle up to 100V repetitive peak reverse voltage. Ideal for rectification applications, this diode operates b/w -65°C to 150°C temperature range.

Details

SS14

Dc Components

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

FDV303N

Fairchild Semiconductor

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Transistor Application: SWITCHING; JESD-609 Code: e3;

Details

SS14

Onsemi

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BSS138

Sipex

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 240;

Details

SS14

Surge Components

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BAV99

Continental Device India

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

M39029/58-360

TE Connectivity

TE Connectivity's M39029/58-360 is a CRIMP terminal backshell for 22-28 AWG wires, rated at 5A. Ideal for male contacts in Mil-Spec applications, it offers a cross-section area of 0.34 mm2 and ensures secure connections in demanding environments.

Details

MBRS360T3G

Onsemi

MBRS360T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.63V and a max output current of 3A. It is designed for applications requiring high-speed switching and low power loss, making it suitable for use in various electronic devices.

Details

1N4148WS

Yangzhou Yangjie Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LL4148

Onsemi

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

FSD77-8-D Technical Details

TYPE	DESCRIPTION
Other Names:	3845-FSD77-8-D 298-10286 FSD77-8-D-ND FSD778D
Maximum Wire Size:	18 AWG
MIL Conformity:	NO
Connector Accessory Type:	TERMINAL BLOCK ACCESSORY
Assembly Item Name:	FERRULE
Insulator Material:	POLYPROPYLENE
IEC Conformity:	NO
Approvals (V):	CSA
DIN Conformity:	YES
Maximum Cable Entry:	.12 inch

Category Top Products

2-2154857-1

TE Connectivity

TE Connectivity's 2-2154857-1 is a POWER assembly product with a rated voltage of 250V and max operating temperature of 105°C. It can handle wire sizes up to 0 AWG and has a rated current of 4A. This versatile copper alloy component is commonly used in applications requiring high power transmission.

163557-2

TE Connectivity

The TE Connectivity 163557-2 is a MATE-N-LOK HOUSING with CRIMP terminals. It supports wire sizes from 22 AWG to 18 AWG and rated for 15A current at 250V AC. Ideal for power applications, it features FEMALE contacts with ROUND PIN-SOCKET design and BRASS material construction.

1060-14-0122

TE Connectivity

TE Connectivity's 1060-14-0122 contact features crimp terminal type, stamped contact design, and copper alloy material. With a wire gauge of 14 AWG and rated current of 13 A, it is ideal for applications requiring male round pin-socket contacts in assembly products.

1-206062-6

TE Connectivity

TE Connectivity's 1-206062-6 cable clamp is UL approved with shell size 11. It accommodates up to 0 AWG wire and 0.329" cable entry, made of polyethylene for straight mounting with a 5/8-24 UNEF-2B screw option. Ideal for securing cables in various assembly applications.

7810.6412.0

Molex

CONNECTOR ACCESSORY;

2411-002-1805

TE Connectivity

CONNECTOR ACCESSORY; Contact Gender: FEMALE; Wire Gauge (AWG): 0; Minimum Operating Temperature: -55 Cel; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 125 Cel;

979-009-030R121

Norcomp Interconnect Devices

Norcomp's 979-009-030R121 backshell is a zinc alloy D-SUB connector accessory. It can operate in temperatures ranging from -45°C to 120°C, with a screw mounting option. Ideal for assembly products requiring durable and reliable interconnect solutions.

DF13-3032SCF

Hirose Electric

DF13-3032SCF by Hirose Electric is a CRIMP terminal with POLYAMIDE insulator. Rated for 150V AC, it has a contact resistance of 30 mohm and can handle up to 1A current. Ideal for applications requiring FEMALE contacts, such as in UL-approved assemblies operating b/w -35°C to 85°C.

VN020160002(1)

Amphenol

Amphenol's VN020160002(1) features crimp terminal type, 600V AC/DC voltage rating, and 14A current. Ideal for applications requiring stamped contact design, with wire sizes ranging from 26-16 AWG. Suitable for use in environments with temperatures b/w -40 to 125°C.

293726-1

TE Connectivity

CONNECTOR ACCESSORY;

0462-005-2031

TE Connectivity

TE Connectivity's 0462-005-2031 contact features crimp terminal type, machined contact design, and rated current of 7.5A. Ideal for applications requiring female gender contacts with wire gauge ranging from 16 to 18 AWG in straight mounting style.

14

TE Connectivity

TERMINAL BLOCK ACCESSORY; Usage: 100 SERIES TERMINAL BLOCK, MINIATURE & SINGLE TIER; Assembly Item Name: GANGING ROD;

02-08-1003

Molex

Molex 02-08-1003 CONTACT is a FEMALE CRIMP terminal made of BRASS. It features STRAIGHT mounting style and SQ PIN-SKT contact style. Ideal for assembly products requiring reliable electrical connections in various applications.

WM-2PA

TE Connectivity

CONNECTOR ACCESSORY; Material: POLYBUTYLENE TEREPHTHALATE; Design: POWER AND SIGNAL; Maximum Operating Temperature: 125 Cel; Minimum Operating Temperature: -55 Cel;

HDR-E26LPHP+

Honda Tsushin Kogyo

CONNECTOR ACCESSORY; Mounting Option-1: M2; MIL Conformity: NO; IEC Conformity: NO; Material: PBT RESIN; DIN Conformity: NO;

08-52-0071

Molex

Molex 08-52-0071 is a CRIMP terminal with PHOSPHOR BRONZE material. It supports wire sizes from 24 AWG to 18 AWG and has a finish thickness of 100. Ideal for applications in various SERIES HOUSING models with 0.11" to 0.118" cable entry.

AT13-204-2005

Amphenol

CONNECTOR ACCESSORY;

0460-202-16141

TE Connectivity

TE Connectivity's 0460-202-16141 contact features a crimp terminal type, machined contact design, and rated AC voltage of 1500V. With a wire gauge range of 20-16 AWG, it is ideal for applications requiring a male round pin-socket contact style in assembly products.

1727040100

Molex

Molex 1727040100 BACKSHELL for FCT D-SUB features 0.118" to 0.335" cable entry, ZINC ALLOY material, and -35°C to 100°C operating temp. Mounting options include SCREW or 4-40 UNC. Ideal for securing cables in electronic assemblies.

1718250100

Molex

CONNECTOR ACCESSORY;