Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

1073

Manufacturer

Ntt
Manufacturer's Part Number

1073
Description

LUG TERMINAL; Additional Features: MATERIAL: STEEL; FINISH: TIN;
Datasheet

Datasheet

Not In Stock

Popular Products

M39029/58-360

Molex

CONNECTOR ACCESSORY; Alternate Contact Sources: MILITARY; Removal Tool Sources: MILITARY; Material: COPPER ALLOY; National Stock Number (NSN): 5999004733551; Mating Contacts: M39029/56-348, M39029/57-354;

Details

MMBT2907ALT1G

Rochester Electronics

PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 200 MHz; Maximum Collector Current (IC): .6 A; Terminal Form: GULL WING;

Details

SMBJ18CA

Jiangsu Jiejie Microelectronics

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148WS

Sangdest Microelectronics (Nanjing)

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148

Weitron Technology

RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb);

Details

BSS138BKW,115

NXP Semiconductors

NXP Semiconductors' BSS138BKW,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A ID. Ideal for SWITCHING applications, it features a built-in diode, 1.6 ohm RDS(on), and operates in ENHANCEMENT MODE. Suitable for surface mount with GULL WING terminals, it meets AEC-Q101 standards.

Details

MBR130T1G

Onsemi

MBR130T1G by Onsemi is a Schottky rectifier diode with max output current of 1A and max repetitive peak reverse voltage of 30V. It operates b/w -65 to 125°C, suitable for surface mount applications in electronics requiring low forward voltage drop.

Details

SS14

Promax-johnton

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BAV99

Infinex

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM107H/883C

General Electric Solid State

OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Wideband: NO;

Details

1N4148

Temic Semiconductors

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

LM107H/883

Advanced Micro Devices

OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;

Details

BSS138

Micro Commercial Components

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Position: DUAL;

Details

BAV99

Itt Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BSS138W-7-F

Multicomp Pro

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Transistor Element Material: SILICON; No. of Elements: 1;

Details

LL4148

Sinyork

RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V;

Details

C0603X104K5RACAUTO

KEMET Corporation

C0603X104K5RACAUTO by KEMET Corp is a ceramic capacitor with capacitance of 0.1 uF and rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate b/w -55 to 125 °C. This SMT package is commonly used in automotive applications due to its AEC-Q200 reference standard.

Details

LAN8720A-CP-TR

Microchip Technology

LAN8720A-CP-TR by Microchip: Ethernet transceiver with 100 Mbps data rate, operates at 3.3V, and consumes 54mA max supply current. Ideal for network interfaces in commercial applications due to its small size (4x4mm) and low power consumption.

Details

MBRS360T3G

Onsemi

MBRS360T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.63V and a max output current of 3A. It is designed for applications requiring high-speed switching and low power loss, making it suitable for use in various electronic devices.

Details

1N4148

Unitrode

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

1073 Technical Details

TYPE	DESCRIPTION
Product Type:	Lug Terminal
Additional Features:	Material: Steel; Finish: Tin

Category Top Products

517

TE Connectivity

MODULAR TERMINAL BLOCK; Additional Features: PHENOLIC; Wire Gauge: 12 AWG; Voltage (Rated): 300 V; Current (Rated): 20 A; Manufacturer Series: 517;

DRA1-CMX60D10

Sensata Technologies

MODULAR TERMINAL BLOCK; Mounting Type: DIN RAIL; Fastening Method: SCREW; Voltage (Rated): 60 V; No. of Ways: 4; Current (Rated): 10 A;

8-33465-2

TE Connectivity

RING TERMINAL; Wire Gauge: 6 AWG; Wire Cross Section: 15 mm2; Terminal Gender: FEMALE; Safety Approval: UL; No. of Ways: 1;

MS-25036-107

Molex

Molex MS-25036-107 is a UL-approved RING TERMINAL for 14 AWG wire with 300V rating. Ideal for single-way connections with 2.08 mm2 wire cross-section, commonly used in electrical applications.

1043

Ntt

LUG TERMINAL; Additional Features: MATERIAL: STEEL; FINISH: TIN;

250-202

Wago

The Wago 250-202 is a BARRIER STRIP TERMINAL BLOCK with BOARD mounting type. It has a rated voltage of 250V, current of 8A, and accepts wire gauge up to 16 AWG. With safety approvals from CCA, CSA, KEMA, and UL, it's ideal for applications requiring secure electrical connections in limited space.

1869253

Phoenix Contact

Phoenix Contact 1869253 is a UL-approved barrier strip terminal block with 6 ways. It supports wire gauge up to 16 AWG and rated voltage of 250V, ideal for board mounting applications requiring a current rating of 13.5A.

1844210

Phoenix Contact

The Phoenix Contact 1844210 is a BOARD-mounted BARRIER STRIP TERMINAL BLOCK with CSA, UL, VDE safety approvals. It has a rated voltage of 300V and current of 8A, suitable for applications requiring secure connections in industrial settings. The connector fastening method and 2-way configuration make it ideal for various terminal connection needs.

1SNK506315R0000

TE Connectivity

TE Connectivity's 1SNK506315R0000 is a DIN RAIL mounted MODULAR TERMINAL BLOCK with UL safety approval. It supports wire gauge up to 10 AWG, voltage rating of 300V, and current rating of 25A. Ideal for applications requiring secure electrical connections in industrial settings.

1247

Keystone Electronics

TAB TERMINAL;

BNH30W

Idec

MODULAR TERMINAL BLOCK;

2-3.7

J S T Mfg

RING TERMINAL; Wire Gauge: 14 AWG; Wire Cross Section: 2.63 mm2;

MS-25036-146

Molex

RING TERMINAL; Terminal Gender: FEMALE; Manufacturer Series: MS-25036;

9-160583-5

TE Connectivity

TE Connectivity 9-160583-5 is a UL-approved PUSH-ON TERMINAL for 16 AWG wire, rated at 300V. With a wire cross section of 1.5 mm2, it's ideal for female terminals in various applications.

2061-602/998-404

Wago

Wago's 2061-602/998-404 is a BOARD-mounted BARRIER STRIP TERMINAL BLOCK with 16 AWG wire gauge, 300V rated voltage, and 1.5mm2 wire cross section. It features SPRING LOADED fastening method for secure connections in applications requiring up to 17.5A current across 2 ways, meeting IEC and UL safety standards.

970

Zierick Manufacturing

RING TERMINAL;

2002-3211/1000-410

Wago

MODULAR TERMINAL BLOCK;

1-963748-1

Tyco Electronics Amp

TAB TERMINAL; Manufacturer Series: 963748; Terminal Gender: MALE; Wire Cross Section: 1 mm2;

MS25036-157

Amphenol Communications Solutions

RING TERMINAL; Additional Features: NYLON; Wire Gauge: 10 AWG; Voltage (Rated): 600 V; Safety Approval: CSA; UL; Wire Cross Section: 6 mm2;

222-413

Wago

Wago 222-413 is a DIN RAIL strip terminal block with 3 ways, rated for 32A current and 400V voltage. It supports wire gauge up to 12 AWG and wire cross section of 2.5 mm2. Ideal for industrial applications requiring secure push-on fastening method on terminal blocks.