Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

NX3225GA-20.000M-STD-CRG-1

Manufacturer

Nihon Dempa Kogyo
Manufacturer's Part Number

NX3225GA-20.000M-STD-CRG-1
Description

PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 20 ppm; Load Capacitance: 8 pF; Physical Dimension: L3.2XB2.5XH0.75 (mm)/L0.126XB0.098XH0.03 (inch); Maximum Operating Temperature: 70 Cel;
Datasheet

Datasheet

Not In Stock

Popular Products

NC7WZ07P6X

Fairchild Semiconductor

BUFFER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR;

Details

1N4148

Unitrode

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

EPCS4SI8N

Intel

EPCS4SI8N by Intel is a small outline flash memory with 512Kx8 organization, operating at 3.3V. It features a max clock frequency of 40MHz and endurance of 100k write/erase cycles. Ideal for industrial applications requiring configuration memory with serial interface and low standby current consumption.

Details

LM555CM

Harris Semiconductor

Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;

Details

LM2675M-ADJ/NOPB

Texas Instruments

LM2675M-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with 1A output current, 37V max output voltage, and 260kHz max switching frequency. Ideal for automotive applications due to its -40°C to 125°C operating temperature range and compact small outline package design.

Details

LL4148

Kec

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

BAV99

Allegro MicroSystems

RECTIFIER DIODE; Terminal Position: END; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM358MX

ROHM

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR;

Details

SZNUP2105LT1G

Onsemi

SZNUP2105LT1G by Onsemi is a Transient Suppression Device with 2 elements in a common anode configuration. It has a max non-repetitive peak reverse power dissipation of 350W and breakdown voltage of 29.1V. Ideal for applications requiring bidirectional polarity protection, such as automotive electronics and industrial equipment due to its AEC-Q101 compliance and high clamping voltage of 44V.

Details

SS14

Zowie Technology

RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Operating Temperature: 125 Cel; No. of Elements: 1; Maximum Non Repetitive Peak Forward Current: 30 A;

Details

EU2B-YS3303C

Idec

ROTARY SWITCH;

Details

BAV99

Panasonic

MIXER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N2222A

Tt Electronics Plc

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;

Details

261

Deltrol Controls

Other Relays;

Details

BAV99

Diotec Semiconductor Ag

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LL4148

Secos

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

1N4148

American Power Devices

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

1N4148WT

Formosa Microsemi

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM358AN

Philips Semiconductors

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

SSL-LXA228SRC-TR11

Lumex

SSL-LXA228SRC-TR11 by Lumex is a 1.9mm SINGLE COLOR LED with peak wavelength of 660nm and max forward current of 0.03A. Ideal for applications requiring SUPER RED light emission, such as indicator lights in electronic devices due to its clear lens and surface mounting feature.

Details

NX3225GA-20.000M-STD-CRG-1 Technical Details

TYPE	DESCRIPTION
Load Capacitance:	8 pF
Frequency Tolerance:	20 ppm
Drive Level:	10 uW
Nominal Operating Frequency:	20 MHz
Frequency Stability:	30 %
Series Resistance:	80 ohm
Physical Dimension:	L3.2XB2.5XH0.75 (mm)/L0.126XB0.098XH0.03 (inch)
Crystal or Resonator Type:	PARALLEL - FUNDAMENTAL
Maximum Operating Temperature:	70 Cel
Minimum Operating Temperature:	-10 Cel
Mounting Feature:	SURFACE MOUNT

Category Top Products

ST3215SB32768H5HPWAA

Kyocera

Kyocera ST3215SB32768H5HPWAA crystal oscillator offers 20 ppm frequency tolerance, 200% stability, and 70000 ohm series resistance. Ideal for applications requiring 0.032768 MHz frequency with -40 to 85 °C operating temperature range. Suitable for surface mount setups needing precise timing control.

HCM498000000ABJT

Citizen Finedevice

Citizen Finedevice's HCM498000000ABJT crystal oscillator offers 8 MHz nominal frequency with 30 ppm tolerance and 50% stability. Ideal for applications requiring precise timing, it operates b/w -10°C to 60°C, featuring a compact size of 11.4mm x 4.7mm x 4.3mm for surface mount installation in various electronic devices.

ABM13W-80.0000MHZ-6-N2Y-T5

Abracon

ABM13W-80.0000MHZ-6-N2Y-T5 by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 30% frequency stability, and 25 ohm series resistance. It is used in applications requiring precise timing at a nominal operating frequency of 80 MHz.

MC-30632.7680K-A3:ROHS

Seiko Epson

MC-30632.7680K-A3:ROHS by Seiko Epson is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. It operates at 0.032768 MHz and is ideal for applications requiring precise timing in temperature ranges from -40 to 85 °C.

ABMM2-10.000MHZ-E2-T

Abracon

ABMM2-10.000MHZ-E2-T by Abracon is a 10 MHz crystal oscillator with 20 ppm frequency tolerance and 20% stability. Ideal for applications requiring precise timing, such as telecommunications equipment or industrial automation systems.

ABM8-12.000MHZ-B2-T

Abracon

ABM8-12.000MHZ-B2-T by Abracon is a 12MHz crystal oscillator with 20ppm frequency tolerance and 50% stability. Ideal for applications requiring precise timing in temperature range of -20 to 70°C, such as IoT devices and communication systems.

NX3225GA-10.000M-STD-CRG-2

Nihon Dempa Kogyo

NX3225GA-10.000M-STD-CRG-2 by Nihon Dempa Kogyo is a crystal oscillator with 10 MHz frequency, 20 ppm tolerance, and 30% stability. Ideal for applications requiring precise timing in a temperature range of -40 to 85°C, it features surface mounting and low drive level of 10 uW.

ABM3-12.000MHZ-B2-T

Abracon

ABM3-12.000MHZ-B2-T by Abracon is a 12 MHz crystal oscillator with 20 ppm frequency tolerance and 50% stability. Ideal for applications requiring precise timing, such as telecommunications equipment or industrial automation systems. Operating temperature range from -20 to 70 °C with surface mount feature for easy installation.

ECS-100-20-7SX-TR

Ecs International

ECS-100-20-7SX-TR by Ecs International is a crystal oscillator with 30 ppm frequency tolerance, 50% stability, and 50 ohm series resistance. Ideal for applications requiring precise timing at 10 MHz, such as telecommunications equipment or industrial automation systems. Operating temperature range from -10 to 70 °C with surface mount feature.

MA-40612.2880M-G3:ROHS

Seiko Epson

Seiko Epson's MA-40612.2880M-G3:ROHS crystal oscillator operates at 12.288 MHz with 50 ppm frequency tolerance and 30% stability, suitable for applications requiring precise timing in a temperature range of -20 to 70 °C. It features parallel-fundamental type, aging rate of 5 PPM/yr, and surface mounting, making it ideal for compact electronic devices.

FC-13532.7680KA-AC0

Seiko Epson

Seiko Epson's FC-13532.7680KA-AC0 crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in a compact 3.2mm x 1.5mm x 0.8mm surface mount package with gold over nickel finish.

R1612-25.000-9-F-1010-TR

Raltron Electronics

Raltron Electronics' R1612-25.000-9-F-1010-TR is a crystal oscillator with 10 ppm frequency tolerance and 10% stability, suitable for applications requiring precise timing. With a series resistance of 150 ohm, it operates at frequencies up to 25 MHz and features a parallel fundamental crystal type. Ideal for surface mount setups, this component has a compact size of 1.6mm x 1.25mm x 0.32mm and can withstand temperatures from -10°C to 60°C.

ABMM-24.000MHZ-B-2-T

Abracon

ABMM-24.000MHZ-B-2-T by Abracon is a 24 MHz crystal oscillator with 20 ppm frequency tolerance and 50% stability. Ideal for applications requiring precise timing, it operates b/w -20 to 70 °C and features a parallel-fundamental crystal type. Suitable for surface mounting, it has a compact size of L7.2XB5.2XH1.3 (mm).

ABMM-7.3728MHZ-B-2-T

Abracon

ABMM-7.3728MHZ-B-2-T by Abracon is a 7.3728 MHz crystal oscillator with 20 ppm frequency tolerance and 50% stability. Ideal for applications requiring precise timing, it operates b/w -20 to 70 °C, featuring a parallel-fundamental crystal type and surface mounting feature.

ABLS-4.9152MHZ-B-2-T

Abracon

ABLS-4.9152MHZ-B-2-T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 50% stability, and 180 ohm series resistance. Ideal for applications requiring precise timing at 4.9152 MHz, such as telecommunications equipment or industrial automation systems. Operating temperature range from -20 to 70 °C with compact surface mount design.

CM41532768DZFT

Citizen Finedevice

Citizen Finedevice's CM41532768DZFT is a 0.032768 MHz crystal oscillator with 20 ppm frequency tolerance and 122% stability, ideal for applications requiring precise timing in a compact form factor. With a surface mount feature and gold terminal finish, it operates b/w -40 to 85 °C, making it suitable for various electronic devices.

405I35B33M00000

Cts

405I35B33M00000 by Cts is a crystal oscillator with 30 ppm frequency tolerance, 50% stability, and 40 ohm series resistance. Ideal for applications requiring precise timing at 33 MHz, such as telecommunications equipment or industrial automation systems. Operating temperature ranges from -40 to 85 °C.

ABM3B-25.000MHZ-10-1-U-T

Abracon

ABM3B-25.000MHZ-10-1-U-T by Abracon is a crystal oscillator with 25MHz frequency, 10ppm tolerance, and 10% stability. Ideal for applications requiring precise timing in electronics due to its high accuracy and low aging rate of 5PPM/yr.

NX5032GA-8.000M-STD-CSU-1

Nihon Dempa Kogyo

NX5032GA-8.000M-STD-CSU-1 by Nihon Dempa Kogyo is an 8 MHz crystal oscillator with 50 ppm frequency tolerance and 150% stability. Ideal for applications requiring a surface mount, it operates b/w -40 to 150 °C, with a drive level of 10 uW.

7B-12.000MAAJ-T

Txc

7B-12.000MAAJ-T by Txc is a crystal oscillator with 30 ppm frequency tolerance and 30% stability, ideal for applications requiring precise timing. Featuring a parallel fundamental type, it operates at 12 MHz with aging of 3 PPM/year. With surface mounting feature and gold-nickel terminal finish, it ensures reliable performance in temperatures ranging from -20 to 70°C.