Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

70553-0005

Manufacturer

Molex
Manufacturer's Part Number

70553-0005
Description

BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Mounting Style: RIGHT ANGLE;
Datasheet

Datasheet

Not In Stock

Popular Products

1N4148WS

Vishay Intertechnology

Vishay Intertechnology's 1N4148WS is a single rectifier diode with a max forward voltage of 1V and output current of 0.15A. With a fast reverse recovery time of 0.004us, it operates up to 150°C. Ideal for applications requiring high-speed switching and low power consumption in surface mount configurations.

Details

1N4148

Nte Electronics

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

OPA2227UA

Texas Instruments

OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.

Details

SS14

Promax-johnton

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SZNUP2105LT1G

Onsemi

SZNUP2105LT1G by Onsemi is a Transient Suppression Device with 2 elements in a common anode configuration. It has a max non-repetitive peak reverse power dissipation of 350W and breakdown voltage of 29.1V. Ideal for applications requiring bidirectional polarity protection, such as automotive electronics and industrial equipment due to its AEC-Q101 compliance and high clamping voltage of 44V.

Details

LM358N

Intersil

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

1N4148WS

Fairchild Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BAV99

Microsemi

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N2222A

National Semiconductor

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .5 A;

Details

MMBT3904LT1G

Onsemi

MMBT3904LT1G by Onsemi is a NPN BJT with max. collector-emitter voltage of 40V, hFE of 30, and fT of 300MHz. Ideal for small signal applications in electronics due to its compact size, high transition frequency, and low power dissipation capabilities.

Details

BAV99

Philips Semiconductors

RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN; Maximum Reverse Recovery Time: .006 us;

Details

DS18B20Z+

Analog Devices

DS18B20Z+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.

Details

SS14

Taitron Components

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

ULN2003ADR

Texas Instruments

ULN2003ADR by Texas Instruments is a NPN BJT with 7 elements, max IC of 0.5A, and VCEsat of 1.6V. Ideal for switching applications in small outline packages with Gull Wing terminals.

Details

2N2222A

Electronic Transistors

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

EU2B-YS3203F

Idec

ROTARY SWITCH;

Details

M39029/56-351

Glenair

CONNECTOR ACCESSORY; Associated Backshell Military - Specifications: MIL-DTL-38999; Material: COPPER ALLOY; Associated Military - Specifications: MIL-DTL-38999; Contact Gender: FEMALE; DIN Conformity: NO;

Details

BAV99

Meritek Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

ULN-2803A

Vishay Sprague

Vishay Sprague's ULN-2803A is an 8-bit peripheral driver with a max supply voltage of 3V. Featuring open-collector output characteristics, it offers built-in transient protections and operates b/w -20°C to 85°C. Ideal for applications requiring sink current flow direction, this rectangular-shaped driver has a terminal pitch of 2.54mm and turn-on/off time of 1us.

Details

1554216004

Molex

WIRE AND CABLE;

Details

70553-0005 Technical Details

TYPE	DESCRIPTION
PCB Contact Pattern:	RECTANGULAR
Mating Contact Finish:	NOT SPECIFIED
Mating Info.:	MULTIPLE MATING PARTS AVAILABLE
IEC Conformity:	NO
Sub-Category:	Headers and Edge Type Connectors
MIL Conformity:	NO
No. of Rows Loaded:	1
Termination Type:	SOLDER
Body Length:	.7 inch
Contact Gender:	MALE
Connector Type:	BOARD CONNECTOR
Contact Material:	PHOSPHOR BRONZE
Mounting Option-2:	LOCKING
UL Flammability Code:	94V-0
Mounting Style:	RIGHT ANGLE
Mixed Contacts:	NO
Plating Thickness (inch):	15u
Contact Style:	SQ PIN-SKT
Filter Feature:	NO
No. of PCB Rows:	1
Mounting Type:	BOARD
JESD-609 Code:	e3
Body Depth:	.535 inch
Total No. of Contacts:	6
Body Width:	.275 inch
Terminal Pitch (mm):	2.54
Terminal Length:	.13 inch
Termination Contact Finish:	Matte Tin (Sn) - with Nickel (Ni) barrier
No. of Connectors:	ONE
Insulator Material:	GLASS FILLED POLYESTER
Additional Features:	LATCHED
Insulator Color:	BLACK
Reference Standard:	UL
Option:	GENERAL PURPOSE
Contact Pattern:	RECTANGULAR
Mating Contact Pitch (inch):	0.1
Body or Shell Style:	RECEPTACLE
Reliability:	COMMERCIAL
DIN Conformance:	NO

Category Top Products

VHR-4N-R

J S T Mfg

BOARD CONNECTOR;

341-054-500-101

Edac

Edac 341-054-500-101 is a CARD EDGE CONNECTOR with 54 contacts at 0.1" pitch. It has an insulation resistance of 5Gohm, rated for 3A signal current, and operates b/w -40 to 105°C. Ideal for wire wrap termination in applications requiring high contact reliability and low withdrawal force.

B5P-VH(LF)(SN)

J S T Mfg

B5P-VH(LF)(SN) by J S T Mfg is a 5-contact BOARD CONNECTOR with 0.156" pitch, 1500VAC dielectric voltage, and 10A signal current. It features POLYAMIDE66 insulation, BRASS contacts with Tin finish, and operates b/w -25 to 85 °C. Ideal for PCB applications requiring high insulation resistance and UL94V-0 flammability rating.

DF3A-2P-2DSA

Hirose Electric

DF3A-2P-2DSA by Hirose Electric is a board connector with 0.079" mating contact pitch, 650VAC dielectric voltage, and 1000000000 ohm insulation resistance. Ideal for commercial applications, it features a solder termination type and operates b/w -30 to 85 °C temperatures.

746-060-520-601

Edac

Edac 746-060-520-601 is a CARD EDGE CONNECTOR with 60 contacts, rated at 3A signal current. It has a mating pitch of 0.125", insulation resistance of 5Gohm, and dielectric voltage rating of 1500VAC. Ideal for board mounting applications requiring high reliability in temperatures ranging from -40 to 105°C.

475532001

Molex

PCB CONNECTOR; Option: GENERAL PURPOSE; DIN Conformance: NO; MIL Conformity: NO; Contact Material: NOT SPECIFIED; IEC Conformity: NO;

50-37-5063

Molex

The Molex 50-37-5063 is a board connector with 0.098" mating contact pitch, 0.685" body length, and 1000000000 ohm insulation resistance. It is used in applications requiring a durable female connector with 6 contacts, crimp termination, and POLYBUTYLENE TEREPHTHALATE insulator material.

154763-E

TE Connectivity

TE Connectivity's 154763-E header connector features a mating contact pitch of 0.05", insulation resistance of 10^10 ohm, and dielectric voltage rating of 707VAC. Ideal for board mounting applications in electronics, this male connector with liquid crystal polymer insulator offers durability up to 500 cycles at temperatures ranging from -55°C to 125°C.

22-27-2051

Molex

The Molex 22-27-2051 is a board connector with 5 contacts, featuring a mating pitch of 0.1", insulation resistance of 1Gohm, and rated current of 4A. It is used in applications requiring a durable, polarized housing with solder termination and UL94V-0 flammability rating.

35572-0300

Molex

Molex 35572-0300 is a board connector with 3 contacts, 0.098" pitch, and 1000VAC voltage rating. Ideal for commercial applications, it features tin finish contacts, operates b/w -40 to 105°C temperatures, and has UL94V-0 flammability rating.

351-80-139-00-004101

Preci-dip Sa

351-80-139-00-004101 by Preci-dip Sa is a BOARD CONNECTOR with 39 contacts, BRASS material, and TIN finish. It has a terminal pitch of 2.54mm and UL Flammability Code of 94V-0. Ideal for applications requiring reliable male connectors on circuit boards with solder termination.

SSW-102-01-T-D

Samtec

SSW-102-01-T-D by Samtec is a 2-row, 4-contact board connector with a mating contact pitch of 0.1". It features liquid crystal polymer insulator material and phosphor bronze contact material. Ideal for commercial applications requiring a reliable, straight-mount socket connection on PCBs.

DF3A-4P-2DSA

Hirose Electric

DF3A-4P-2DSA by Hirose Electric is a 4-contact board connector with 0.079" pitch, suitable for commercial applications. It features a dielectric voltage of 650VAC, insulation resistance of 1Gohm, and operates b/w -30 to 85°C. Ideal for PCB mounting with solder termination and UL94V-0 flammability rating.

22-01-3047

Molex

Molex 22-01-3047 is a board connector with 0.1" pitch, suitable for headers & edge type connectors. Featuring POLYAMIDE insulation, it offers 700VAC dielectric voltage and operates b/w -40 to 105 °C. Ideal for commercial applications requiring a durable, polarized female connector with 4A signal current capacity.

FTS-105-01-L-DV-P-TR

Samtec

Samtec FTS-105-01-L-DV-P-TR is a 10-contact board connector with 0.05" mating pitch, suitable for commercial applications. It features gold over nickel finish, liquid crystal polymer insulator, and matte tin termination. Ideal for PCBs with 1.27mm terminal pitch and operating temperatures from -55 to 125°C.

S6B-XH-SM4-TB(LF)(SN)

J S T Mfg

BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Contact Finish: TIN; Mixed Contacts: NO; Terminal Pitch (mm): 2.5;

B02B-PASK(LF)(SN)

J S T Mfg

B02B-PASK(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 0.079" mating contact pitch, 800VAC dielectric voltage, and 3A signal current rating. It features GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator material and is suitable for board mounting applications requiring high insulation resistance and reliable signal transmission.

2-640456-4

Tyco Electronics Amp

BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Contact Finish: TIN; No. of Rows Loaded: 1; Mounting Type: BOARD;

801-43-038-10-003000

Mill-max Mfg

801-43-038-10-003000 by Mill-max Mfg is a BOARD CONNECTOR with GOLD OVER NICKEL finish. Featuring 38 contacts on a 2.54mm pitch, it's ideal for applications requiring FEMALE SOCKET connectors in a STRAIGHT mounting style on PCBs with UL94V-0 flammability rating.

292171-9

TE Connectivity

TE Connectivity's 292171-9 is a board connector with 0.079" mating contact pitch, 1000000000 ohm insulation resistance, and 125V rated voltage. Ideal for commercial applications, it features GLASS FILLED POLYAMIDE insulator material and supports wire sizes from 28 AWG to 22 AWG.