Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

823-22-010-10-000101

Manufacturer

Mill-max Mfg
Manufacturer's Part Number

823-22-010-10-000101
Description

BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Type: SOLDER; No. of Rows Loaded: 2; Filter Feature: YES;
Datasheet

Datasheet

Not In Stock

Popular Products

LM317T/NOPB

National Semiconductor

ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; JESD-609 Code: e3; Package Shape: RECTANGULAR;

Details

NE555D

Philips Semiconductors

Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;

Details

2N7002-7-F

Diodes Incorporated

Diodes Inc. 2N7002-7-F is a N-channel FET with 60V DS breakdown voltage, 0.115A max drain current, and 13.5 ohm RDS(on). Ideal for switching applications in enhancement mode operation. Features Gull Wing terminals, small outline package style, and operates up to 150°C.

Details

2N7002

Sinyork

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Operating Temperature: 85 Cel; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Operating Mode: ENHANCEMENT MODE;

Details

FT232RL-REEL

FTDI

FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.

Details

LM107H

Advanced Micro Devices

OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Bias Current (IIB) @25C: .075 uA;

Details

ATMEGA328P-AU

Microchip Technology

ATMEGA328P-AU by Microchip: 8-bit RISC CPU, 20 MHz clock, 23 I/O lines. Ideal for industrial applications with SPI, TWI, USART connectivity and low power mode. Features include 2048 RAM bytes, 1024 EEPROM size, and 16384 ROM words.

Details

2N7002

Changzhou Galaxy Century Microelectronics

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Minimum DS Breakdown Voltage: 60 V; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; No. of Terminals: 3;

Details

SMBJ18CA

Bourns

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148WS

Tak Cheong Electronics Holdings

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM107H/883

Linear Technology

OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;

Details

BSS138LT3G

Onsemi

BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.

Details

NE555DR

Texas Instruments

NE555DR by Texas Instruments is an Analog Waveform Generation IC with 8 terminals, operating voltage of 5V, and power supplies ranging from 5-15V. It is a versatile component for pulse generation applications due to its small outline package and commercial temperature grade suitability.

Details

OPA2277UA

Texas Instruments

OPA2277UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 100 uV and micropower consumption of 1.65 mA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1000 kHz in a small outline package.

Details

MBRS1100T3G

Onsemi

MBRS1100T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.75V. It operates in temperatures ranging from -65 to 175°C, making it suitable for power applications. With a reverse test voltage of 100V, this diode is ideal for high-power circuits requiring efficient rectification.

Details

BSS138

Inter F E T

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: TIN LEAD; Package Body Material: PLASTIC/EPOXY;

Details

SMBJ18CA

Forward International Electronics

TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Nominal Breakdown Voltage: 21.05 V; Maximum Clamping Voltage: 29.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;

Details

1N4148

Baneasa S A

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

BSS138LT1G

Onsemi

BSS138LT1G by Onsemi is a N-CHANNEL FET with 50V DS Breakdown Voltage, 0.2A Drain Current, and 3.5 ohm On Resistance. Ideal for SWITCHING applications due to its ENHANCEMENT MODE operation and built-in DIODE. Operates b/w -55 to 150 °C with small outline package style for surface mount assembly.

Details

SS14

Zowie Technology

RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Operating Temperature: 125 Cel; No. of Elements: 1; Maximum Non Repetitive Peak Forward Current: 30 A;

Details

823-22-010-10-000101 Technical Details

TYPE	DESCRIPTION
Mounting Style:	STRAIGHT
Other Names:	823-22-010-10-000-101 ED8175-10 8232201010000100
Mixed Contacts:	NO
Mating Contact Finish:	NOT SPECIFIED
Filter Feature:	YES
IEC Conformity:	NO
Mounting Type:	BOARD
JESD-609 Code:	e4
Total No. of Contacts:	10
Terminal Pitch (mm):	2.54
MIL Conformity:	NO
No. of Rows Loaded:	2
Termination Type:	SOLDER
Termination Contact Finish:	GOLD OVER NICKEL
Contact Gender:	MALE
Connector Type:	BOARD STACKING CONNECTOR
Contact Material:	NOT SPECIFIED
Additional Features:	LOW PROFILE
Option:	GENERAL PURPOSE
DIN Conformance:	NO
UL Flammability Code:	94V-0

Category Top Products

B2B-PH-SM4-TB(LF)(SN)(P)

J S T Mfg

B2B-PH-SM4-TB(LF)(SN)(P) by J S T Mfg is a BOARD CONNECTOR with COPPER ALLOY contacts and TIN finish. Featuring 2 contacts, it has a terminal pitch of 2mm and UL 94V-0 flammability rating. Ideal for surface mount applications in headers & edge type connectors.

DT06-3S-EP06

TE Connectivity

TE Connectivity's DT06-3S-EP06 is a 3-contact board connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V, it operates b/w -55 to 125°C. Ideal for cable mounting applications, it has a polarization key and UL 94V-0 flammability code.

MEM2051-00-195-00-A

Global Connector Technology

MEM2051-00-195-00-A by Global Connector Technology is a PCB connector with 0.043" contact pitch, 500VAC dielectric voltage, and 1000000000 ohm insulation resistance. Ideal for applications requiring a female right-angle compression contact style with surface mount termination.

DTM06-6S-E007

Deutsch

BOARD CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1500VAC; No. of Connectors: ONE; Mounting Option-2: LOCKING;

502351-0800

Molex

The Molex 502351-0800 is a board connector with mating contact pitch of 0.079", insulation resistance of 1Gohm, and operating temperature range from -40 to 105°C. It is used in commercial applications requiring an 8-contact male receptacle with crimp termination for cable mounting.

2-640456-3

Tyco Electronics Amp

BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; UL Flammability Code: 94V-0; Terminal Pitch (mm): 2.54;

M50-3500542

Harwin Plc

The Harwin PLC M50-3500542 is a 10-contact male board connector with 0.05" mating contact pitch and 1A signal current rating. Featuring a durable design for 300 cycles, it is ideal for commercial applications requiring a reliable connection in temperatures ranging from -40 to 105°C.

50-57-9008

Molex

The Molex 50-57-9008 is a board connector with 0.1" mating contact pitch, 0.099" body width, and 0.6" body depth. It features glass-filled polyester insulator material and UL 94V-0 flammability code. Ideal for commercial applications requiring an 8-contact female connector with crimp termination on cables.

PHR-10

J S T Mfg

PHR-10 by J S T Mfg is a 10-contact board connector with 0.079" pitch, suitable for cables with 24-30 AWG wires. Featuring POLYAMIDE66 insulation and 800VAC dielectric voltage, it operates b/w -25 to 85°C. With UL94V-0 flammability rating, it offers high insulation resistance of 1 Gohm for various applications.

SM04B-SRSS-TB(LF)(SN)

J S T Mfg

SM04B-SRSS-TB(LF)(SN) by J S T Mfg is a 4-contact board connector with 0.039" pitch, 100000000 ohm insulation resistance, and 500VAC dielectric voltage. Ideal for PCB applications requiring male contacts, surface mount termination, and right-angle mounting.

502

Keystone Electronics

PCB CONNECTOR; Option: GENERAL PURPOSE; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; DIN Conformance: NO; MIL Conformity: NO;

53313-3465

Molex

Molex 53313-3465 is a 34-contact board connector with TIN finish. Featuring 2 loaded rows, it has a terminal pitch of 2mm and UL94V-0 flammability rating. Ideal for applications requiring male contacts, solder termination, and straight mounting style.

22-01-3047

Molex

Molex 22-01-3047 is a board connector with 0.1" pitch, suitable for headers & edge type connectors. Featuring POLYAMIDE insulation, it offers 700VAC dielectric voltage and operates b/w -40 to 105 °C. Ideal for commercial applications requiring a durable, polarized female connector with 4A signal current capacity.

929665-04-31-EU

3m Electronic Products Division

929665-04-31-EU by 3M Electronic Products Division is a BOARD CONNECTOR with Gold (Au) - Nickel (Ni) finish, 62 contacts in 2 rows. It has a terminal pitch of 2.54mm and is ideal for applications requiring high-quality male connectors with solder termination on boards.

61300611821

Wuerth Elektronik & Kg

61300611821 by Wurth Elektronik is a BOARD CONNECTOR with 6 contacts, rated at 3A. It features GOLD contact finish, POLYBUTYLENE TEREPHTHALATE insulator material, and operates b/w -40 to 125 °C. Ideal for commercial applications requiring a reliable connection on PCBs with a mating contact pitch of 0.1 inch.

801-43-020-10-002000

Mill-max Mfg

801-43-020-10-002000 by Mill-max Mfg is a BOARD CONNECTOR with 20 contacts, featuring MATTE TIN OVER NICKEL finish. It has a terminal pitch of 2.54mm and uses SOLDER termination. Ideal for applications requiring FEMALE contact gender in STRAIGHT mounting style on a PCB.

B6B-PH-SM4-TBT(LF)(SN)

J S T Mfg

B6B-PH-SM4-TBT(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 6 contacts, COPPER ALLOY material, and Tin (Sn) finish. It has a terminal pitch of 2mm and is used in applications requiring surface mount male connectors for edge type connections.

1410189-3

TE Connectivity

TE Connectivity 1410189-3: Headers & Edge Type Connector with 0.07" pitch, LCP insulator, and 1A signal current rating. Ideal for board connections in commercial applications due to its durability, UL certification, and polarization key feature.

BM03B-SRSS-TB(LF)(SN)(P)

J S T Mfg

BM03B-SRSS-TB(LF)(SN)(P) by J S T Mfg is a BOARD CONNECTOR with 0.039" pitch, 0.197" body length, and 100000000 ohm insulation resistance. It operates b/w -25 to 85 °C, has a dielectric voltage of 500VAC, and features POLARIZED HOUSING for applications requiring high signal current in PCB mounting setups.

66506-353LF

Amphenol Communications Solutions

Amphenol's 66506-353LF is a 2-row, 34-contact board connector with UL94V-0 flammability rating. Featuring 2.54mm terminal pitch and solder termination, it is ideal for straight mounting applications in headers & edge type connectors.