Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

MCP9700AT-E/LT

Manufacturer

Microchip Technology
Manufacturer's Part Number

MCP9700AT-E/LT
Description

TEMPERATURE SENSOR,ANALOG,RESISTANCE BASED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 5; Package Shape or Style: RECTANGULAR; Package Body Material: PLASTIC/EPOXY; Minimum Operating Temperature: -40 Cel;
Datasheet

Datasheet

Not In Stock

Popular Products

BAV99

Rfe International

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM107H

Linear Technology

LM107H by Linear Technology is an Operational Amplifier with a max input offset voltage of 3000uV, common mode reject ratio of 96dB, and min voltage gain of 50000. It is used in military applications due to its MILITARY temperature grade and BIPOLAR technology for precise signal processing in harsh environments.

Details

MS3V-T1R32.768KHZ+/-20PPM12.5PF

Golledge Electronics

MS3V-T1R32.768KHZ+/-20PPM12.5PF by Golledge Electronics is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 12.5 pF load capacitance. It is ideal for applications requiring precise timing in temperature-sensitive environments due to its -40 to 85 °C operating range.

Details

BAV99

Bkc Semiconductors

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148

Diotec Electronics

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

2N2222A

Swampscott Electronics

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

SN65HVD234DR

Texas Instruments

SN65HVD234DR by Texas Instruments is an 8-terminal interface circuit with a data rate of 1 Mbps. Operating temperature ranges from -40 to 125 °C, making it ideal for automotive applications. With a supply voltage of 3.3 V and low current draw of 6 mA, it's suitable for network interfaces in compact designs.

Details

STM32H753IIT6

STMicroelectronics

STM32H753IIT6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs and 2-Ch 12-Bit DACs, suitable for industrial applications requiring high-speed data processing and connectivity via CAN, ETHERNET, USB, and more.

Details

SMBJ18CA

Zowie Technology

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

RC0402JR-070RL

Yageo

Yageo's RC0402JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. It features METAL GLAZE/THICK FILM tech, WRAPAROUND terminals, and 0.0625 W power dissipation. Ideal for jumper applications in electronics requiring compact surface mount components.

Details

2N2222A

Semiconductors

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

BSS84-7-F

SPC TECHNOLOGY/ MULTICOMP

P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Transistor Element Material: SILICON;

Details

OPA2277UA

Burr-Brown Corporation

OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

Details

2N7002

North American Philips Discrete Products Div

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Operating Mode: ENHANCEMENT MODE; Maximum Drain Current (ID): .115 A;

Details

CRG0805F10K

Tyco Electronics Components

FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;

Details

CC0603KRX7R9BB104

Yageo

Yageo's CC0603KRX7R9BB104 is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. With X7R temperature characteristics, it operates b/w -55 to 125°C. Ideal for surface mount applications in electronics due to its compact size of 1.6mm x 0.8mm x 0.8mm and wraparound terminals.

Details

M39029/58360

Esterline Technologies

CONNECTOR ACCESSORY; Terminal Type: CRIMP; Removal Tools: M81969/14-01; Associated Military - Specifications: MIL-DTL-38999; IEC Conformity: NO; MIL-Connector Accessory Name: CONTACT;

Details

MMBF170LT1G

Onsemi

MMBF170LT1G by Onsemi is a N-CHANNEL FET with 60V DS Breakdown Voltage and 0.5A Drain Current. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with a max power dissipation of 0.225W. This small outline transistor has a temperature range from -55 to 150 °C.

Details

ULN2803ADWRG4

Texas Instruments

ULN2803ADWRG4 by Texas Instruments is a peripheral driver with 8 functions, open-collector output, and built-in transient protection. It operates b/w -40 to 85 °C with a max supply voltage of 3 V. Ideal for applications requiring sink current flow direction in a small outline package style.

Details

CL10B104KB8NNNC

Samsung Electro-mechanics

CL10B104KB8NNNC by Samsung Electro-mechanics is a ceramic capacitor with capacitance of 0.1uF and rated DC voltage of 50V. It has a negative tolerance of 10% and temperature coefficient of 15ppm/°C, suitable for surface mount applications in various electronic devices. With dimensions of 1.6mm x 0.8mm x 0.9mm, it operates b/w -55 to 125 °C providing stable performance in compact designs.

Details

MCP9700AT-E/LT Technical Details

TYPE	DESCRIPTION
No. of Bits:	12
Minimum Supply Voltage:	2.3 V
Package Body Material:	PLASTIC/EPOXY
Maximum Operating Current:	.015 mA
Maximum Accuracy (Cel):	4
Maximum Supply Voltage:	5.5 V
Sub-Category:	Other Sensors/Transducers
Housing:	PLASTIC
Terminal Finish:	Matte Tin (Sn)
JESD-609 Code:	e3
Minimum Operating Temperature:	-40 Cel
Mounting Feature:	SURFACE MOUNT
Body Width:	1.25 inch
Sensors or Transducers Type:	TEMPERATURE SENSOR,ANALOG,RESISTANCE BASED
No. of Terminals:	5
Package Equivalence Code:	TSSOP5/6,.08
Package Shape or Style:	RECTANGULAR
Termination Type:	SOLDER
Screening Level:	TS 16949
Body Height:	.95 mm
Body Length/Diameter:	2 mm
Maximum Operating Temperature:	125 Cel
Power Supplies (V):	2.5/5

Category Top Products

LM35DT

National Semiconductor

TEMPERATURE SENSOR,ANALOG,VOLTAGE OUTPUT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Package Shape or Style: RECTANGULAR; Body Width: 4.57 inch; Maximum Accuracy (Cel): 0.60;

LM335Z/NOPB

National Semiconductor

TEMPERATURE SENSOR,ANALOG,VOLTAGE OUTPUT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Package Shape or Style: ROUND; Package Equivalence Code: SIP3,.1,50; Minimum Operating Temperature: -40 Cel;

LM73CIMKX-1/NOPB

Texas Instruments

LM73CIMKX-1/NOPB by Texas Instruments is a 14-bit temperature sensor with a supply voltage range of 2.7V to 5.5V and operates b/w -40°C to 150°C. It features a 2-wire interface, digital output, and is ideal for applications requiring precise temperature monitoring in compact spaces due to its small form factor and surface mount capability.

MAX6575LZUT-T

Maxim Integrated

TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; Package Shape or Style: RECTANGULAR; Maximum Accuracy (Cel): 5; Minimum Operating Temperature: -40 Cel; Termination Type: SOLDER;

TMP75AIDGKTG4

Texas Instruments

TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: SQUARE; Maximum Operating Current: .05 mA; Maximum Operating Temperature: 125 Cel;

MAX7500MSA-T

Maxim Integrated

MAX7500MSA-T by Maxim Integrated is a 9-bit temperature sensor with 3.3/5V power supplies, CMOS technology, and ±3°C accuracy. It features a 2-wire interface, operates b/w -55 to 125°C, and is ideal for applications requiring digital output in a compact surface-mount package.

AD590KR-REEL

Analog Devices

AD590KR-REEL by Analog Devices is a temperature sensor with 8 terminals, operating from -55 to 150°C. It has a supply voltage range of 4-30V and outputs 298.2uA current. Ideal for applications requiring resistance-based analog temperature sensing in a compact rectangular package.

MAX7500MUA+

Maxim Integrated

TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: SQUARE; Output Interface Type: 2-WIRE INTERFACE; Termination Type: SOLDER;

SE95DP,118

NXP Semiconductors

SE95DP,118 by NXP Semiconductors is a temperature sensor with 13-bit resolution and ±2°C accuracy. It operates b/w -55°C to 125°C, suitable for various applications requiring precise temperature monitoring. The sensor has a 2-wire interface and is ideal for surface mount installations in electronic devices.

LM20BIM7X

Texas Instruments

LM20BIM7X by Texas Instruments is a temperature sensor with voltage output. It operates b/w -55 to 130°C, with accuracy of 2.5°C and linearity of 0.4°C. Suitable for applications requiring precise temperature monitoring in a compact surface-mount package.

MAX31725MTA+T

Analog Devices

Analog Devices' MAX31725MTA+T is a temperature sensor with 3.7V max supply voltage, 150°C max operating temp, and 0.70°C accuracy. Ideal for applications requiring precise temperature monitoring in compact spaces due to its small form factor and surface mounting feature.

TMP235A4DCKT

Texas Instruments

TMP235A4DCKT by Texas Instruments is a temperature sensor with voltage output. It operates b/w -40 to 150°C, with ±5°C accuracy. Suitable for surface mount applications, it has a supply voltage range of 2.3V to 5.5V and features a compact rectangular plastic package design.

KTY81/220,112

NXP Semiconductors

NXP Semiconductors' KTY81/220,112 is a temperature sensor with 2 terminals, operating from -55 to 150°C. With a resistance-based analog design and positive temperature coefficient of 1630 ohm, it is ideal for through-hole mounting in various applications requiring precise temperature monitoring.

MAX7500MSA+T

Analog Devices

Analog Devices' MAX7500MSA+T is a 9-bit temperature sensor with 3.3/5V power supplies, CMOS technology, and ±3°C accuracy. It features a 2-wire interface, operates from -55 to 125°C, and has a surface-mount package suitable for various applications requiring precise temperature monitoring.

AD590JF/883B

Analog Devices

AD590JF/883B by Analog Devices is a temperature sensor with a max supply voltage of 30V and a power supply of 5V. It has a wide operating temperature range from -55 to 125°C and is commonly used in applications requiring accurate temperature measurements.

ADT7301ARTZ-REEL7

Analog Devices

ADT7301ARTZ-REEL7 by Analog Devices is a 13-bit temperature sensor with a supply voltage range of 2.7V to 5.25V, offering high accuracy within ±4°C. It features a digital output interface and is ideal for applications requiring precise temperature monitoring in a compact surface-mount package.

DS600U+

Maxim Integrated

TEMPERATURE SENSOR,ANALOG,VOLTAGE OUTPUT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: SQUARE; Maximum Output Voltage: .4 V; Maximum Operating Temperature: 125 Cel;

HPP845E131R5

TE Connectivity

TE Connectivity's HPP845E131R5 is a 14-bit temperature sensor with a supply voltage range of 1.5V to 3.8V, suitable for applications requiring digital output at temperatures ranging from -40°C to 125°C. This square-shaped sensor features a 2-wire interface and surface mounting feature, making it ideal for various industrial and consumer electronic devices.

DS1621V+T&R

Maxim Integrated

TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Body Length/Diameter: 4.88 mm; Minimum Supply Voltage: 2.7 V;

LM35AH

Texas Instruments

LM35AH by Texas Instruments is a temperature sensor with a voltage output. It operates b/w -55 to 150°C, with linearity of 0.18°C and positive temperature coefficient. With a supply voltage range of 4-30V, it is ideal for applications requiring precise temperature monitoring in various environments.