Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

All prices are in USD

Bulk

QTY	Unit Price	Ext Price
2,052	$7.828	$16,063.056

MAX3485ESA-T

Manufacturer

Maxim Integrated
Manufacturer's Part Number

MAX3485ESA-T
Description

LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Datasheet

Datasheet

2052 In Stock

Popular Products

2N2222A

Semiconductors

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

BSS138NH6327XTSA2

Infineon Technologies

BSS138NH6327XTSA2 by Infineon is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for small signal applications. Operating in Enhancement Mode, it has 0.36W Power Dissipation and 3.5 ohm Drain-Source Resistance. With Gull Wing terminals and AEC-Q101 reference standard, it's suitable for automotive electronics due to its high temperature range of -55 to 150 °C.

Details

1N4148WT

Tak Cheong Electronics Holdings

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

OPA2227UA

Burr-Brown Corporation

OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

Details

1N4148

Weitron Technology

RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb);

Details

2N2222A

Good-ark Electronics

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): 1.8 W; Maximum Collector Current (IC): .8 A;

Details

ULN2803A

Allegro MicroSystems

NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;

Details

1N4148

Formosa Microsemi

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

ULN2803ADW

Texas Instruments

ULN2803ADW by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85 °C and has a max supply voltage of 3 V. Ideal for applications requiring buffer or inverter-based peripheral drivers with sink current flow direction.

Details

BSS123-7-F

Diodes Incorporated

BSS123-7-F by Diodes Inc. is a N-channel FET with 100V DS breakdown voltage and 0.17A drain current. Ideal for switching applications, it features a single configuration with built-in diode, operates in enhancement mode, and has a max power dissipation of 0.3W.

Details

BAV99

Taiwan Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM358N

Texas Instruments

LM358N by Texas Instruments is an operational amplifier with 2 functions, offering a max input offset voltage of 9000 uV and a nominal common mode reject ratio of 85 dB. Widely used in commercial applications, it operates at temperatures ranging from 0 to 70 °C and has a unity gain bandwidth of 1000 kHz.

Details

ULN-2803A

Vishay Sprague

Vishay Sprague's ULN-2803A is an 8-bit peripheral driver with a max supply voltage of 3V. Featuring open-collector output characteristics, it offers built-in transient protections and operates b/w -20°C to 85°C. Ideal for applications requiring sink current flow direction, this rectangular-shaped driver has a terminal pitch of 2.54mm and turn-on/off time of 1us.

Details

C1206C104K5RACTU

KEMET Corporation

KEMET C1206C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications due to its rectangular package shape and wraparound terminals.

Details

BAV99

Silicon Standard

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N2222A

Hi-tron Semiconductor

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

2N2222A

Crystalonics

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

ERJ3GEY0R00V

Panasonic

ERJ3GEY0R00V by Panasonic is a SMT fixed resistor with 0 ohm resistance, suitable for jumper applications. It features a metal glaze/thick film technology, rated for temperatures b/w -55 to 155 °C. With a compact rectangular construction and matte tin over nickel terminal finish, it is ideal for surface mount installations in various electronic devices.

Details

1N4148

Sensitron Semiconductor

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

2N7002

Formosa Microsemi

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Maximum Drain Current (Abs) (ID): .115 A;

Details

MAX3485ESA-T Technical Details

TYPE	DESCRIPTION
Minimum Supply Voltage:	3 V
Package Body Material:	PLASTIC/EPOXY
Nominal Supply Voltage:	3.3 V
Output Characteristics:	3-STATE
Maximum Time At Peak Reflow Temperature (s):	20
Maximum Seated Height:	1.75 mm
Minimum Out Swing:	1.5 V
Maximum High Level Input Current:	.000002 Amp
Sub-Category:	Line Driver or Receivers
Surface Mount:	YES
Maximum Supply Current:	2.2 mA
Terminal Finish:	TIN LEAD
No. of Terminals:	8
Terminal Position:	DUAL
Package Style (Meter):	SMALL OUTLINE
Technology:	CMOS
JESD-30 Code:	R-PDSO-G8
Package Shape:	RECTANGULAR
Terminal Form:	GULL WING
Maximum Operating Temperature:	85 Cel
Package Code:	SOP
Interface Standard:	EIA-422; EIA-485
Interface IC Type:	LINE TRANSCEIVER
Width:	3.9 mm
Maximum Output Low Current:	2.5 Amp
Moisture Sensitivity Level (MSL):	1
Output Polarity:	COMPLEMENTARY
Input Characteristics:	DIFFERENTIAL SCHMITT TRIGGER
Driver No. of Bits:	1
Maximum Supply Voltage:	3.6 V
Differential Output:	YES
JESD-609 Code:	e0
Minimum Operating Temperature:	-40 Cel
No. of Functions:	1
Qualification:	Not Qualified
Maximum Transmit Delay:	35 ns
Package Equivalence Code:	SOP8,.25
Receiver No. of Bits:	1
Length:	4.9 mm
Maximum Receive Delay:	90 ns
Additional Features:	COMMON I/O; 1 RECEIVER ACTIVE UNDER SHUTDOWN; TRISTATABLE RECEIVER
Peak Reflow Temperature (C):	240
Terminal Pitch:	1.27 mm
Temperature Grade:	INDUSTRIAL
Power Supplies (V):	3.3

Category Top Products

DS89C21TMX/NOPB

Texas Instruments

DS89C21TMX/NOPB by Texas Instruments is a Line Transceiver with 8 terminals, operating at 5V. It features differential outputs, Schmitt trigger input characteristics, and a max transmit delay of 10ns. Ideal for industrial applications requiring reliable data transmission in harsh environments.

ISL81387IAZ-T

Renesas Electronics

ISL81387IAZ-T by Renesas Electronics is a Line Driver & Receiver with 2 functions, operating voltage range of 4.5V to 5.5V, and max output low current of 3A. It is ideal for industrial applications requiring EIA-232, EIA-422, or EIA-485 interface standards in harsh environments with temperatures ranging from -40°C to 85°C.

MAX3232ECWE+

Analog Devices

MAX3232ECWE+ by Analog Devices is a Line Driver & Receiver with 16 terminals. It operates at 3-5.5V, suitable for EIA-232 and TIA-232 interfaces. With BICMOS technology, it has a small outline package ideal for commercial temperature applications.

AM26C32IDR

Texas Instruments

AM26C32IDR by Texas Instruments is a 4-function line driver/receiver with 16 terminals. It operates b/w -40 to 85°C, with a supply voltage range of 4.5-5.5V and max output low current of 6A. Ideal for EIA-422-B/TIA-422-B interfaces in industrial applications requiring differential Schmitt trigger input characteristics.

LTC2862ACS8-2#PBF

Linear Technology

LINE TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

MAX232AESE

Rochester Electronics

LINE TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;

MAX485CSA+

Maxim Integrated

LINE TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

DS2480B/T&R

Maxim Integrated

DS2480B/T&R by Maxim Integrated is a line driver with 8 terminals, operating at -40 to 85 °C. It has a supply voltage range of 4.5-5.5 V and follows EIA-232-C standard for interface IC type LINE DRIVER. Ideal for industrial applications requiring standard input characteristics in a small outline package style.

LTC2855HDE#PBF

Linear Technology

LINE TRANSCEIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: NO LEAD; No. of Terminals: 12; Package Code: HVSON; Package Shape: RECTANGULAR;

SN65LVDS2DBVR

Texas Instruments

SN65LVDS2DBVR by Texas Instruments is a Line Receiver IC with 3.6V max supply voltage, 3.1ns max transmit delay, and 8mA max supply current. Ideal for EIA-644-A/TIA-644-A interface standard applications requiring differential Schmitt trigger input characteristics in industrial temperature grade environments.

MAX3232CSE-T

Maxim Integrated

MAX3232CSE-T by Maxim Integrated is a Line Driver & Receiver with 3.3/5V power supplies, operating from 0 to 70°C. It features EIA-232 and EIA-562 interface standards, totem-pole output characteristics, and Schmitt trigger input characteristics. Ideal for commercial applications requiring inverted output polarity and dual terminal position in a small outline package style.

ISL83483IBZ-T

Intersil

LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

MAX485CSA+T

Maxim Integrated

LINE TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

SN65HVD78DRBR

Texas Instruments

SN65HVD78DRBR by Texas Instruments is a line driver/receiver with 3.6V max supply voltage, 15ns max transmit delay, and 8A max output low current. Ideal for automotive applications, it features EIA-422/EIA-485 interface standards and operates in temperatures ranging from -40 to 125°C.

MAX3160EEAP

Maxim Integrated

MAX3160EEAP by Maxim Integrated is a Line Driver & Receiver with 20 terminals. It operates at 3-5.5V, has a transmit delay of 800ns, and supports EIA-232/422/485 interfaces. Ideal for industrial applications requiring CMOS technology and differential outputs with low current consumption.

ADM3251EARWZ

Analog Devices

ADM3251EARWZ by Analog Devices is a Line Driver & Receiver with 3.3/5V supplies, 20 terminals, and EIA-232-E interface standard. It operates in industrial temperature range (-40 to 85°C) and has a max output low current of 4A. Ideal for applications requiring reliable data transmission over long distances.

L9637D013TR

STMicroelectronics

L9637D013TR by STMicroelectronics is a Line Driver & Receiver with 8 terminals, operating at supply voltages b/w 3-36V. It features Schmitt Trigger input characteristics and an ISO 9141 interface standard, suitable for automotive applications requiring robust communication over long distances. The compact rectangular package with a small outline makes it ideal for space-constrained designs.

MAX3430ESA-T

Maxim Integrated

MAX3430ESA-T by Maxim Integrated is a Line Driver & Receiver with 3.3V supply, EIA-422/EIA-485/TIA-485 interface standards, and BICMOS technology. It features 1500ns max transmit delay, 120ns max receive delay, and 1.6A max output low current. Ideal for industrial applications requiring reliable communication over long distances.

ADM3202ARNZ

Analog Devices

ADM3202ARNZ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V. It features a max supply voltage of 5.5V and can withstand temperatures from -40 to 85°C. Ideal for industrial applications requiring EIA-232-E, TIA-232-E, V.28 interface standards.

MAX232CWE

Maxim Integrated

MAX232CWE by Maxim Integrated is a Line Driver & Receiver with 2 functions, operating at 5V. It has a max transmit delay of 10000ns and output polarity is inverted. Widely used in EIA-232-E, TIA-232-E interfaces for communication applications.