Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

DS1721S+T&R

Manufacturer

Maxim Integrated
Manufacturer's Part Number

DS1721S+T&R
Description

TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Body Width: 3.91 inch; JESD-609 Code: e3;
Datasheet

Datasheet

Not In Stock

Popular Products

BAV99

Sensitron Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SZNUP2105LT1G

Onsemi

SZNUP2105LT1G by Onsemi is a Transient Suppression Device with 2 elements in a common anode configuration. It has a max non-repetitive peak reverse power dissipation of 350W and breakdown voltage of 29.1V. Ideal for applications requiring bidirectional polarity protection, such as automotive electronics and industrial equipment due to its AEC-Q101 compliance and high clamping voltage of 44V.

Details

LM7805CT/NOPB

National Semiconductor

FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Max): 125 Cel; Maximum Output Voltage-1: 5.25 V;

Details

AT90CAN128-16AU

Microchip Technology

AT90CAN128-16AU by Microchip Technology is a microcontroller with 8-bit data RAM and 16-bit address bus width. It operates at a max clock frequency of 16 MHz, making it suitable for industrial applications requiring low power mode and connectivity options like CAN, SPI, and USART. With 53 I/O lines and 8-channel 10-bit ADCs, this microcontroller offers versatile peripheral support for various embedded systems.

Details

1N4148

Grande Electronics

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

LM317T

Comset Semiconductors

Other Regulators; No. of Terminals: 3; Terminal Pitch: 2.54 mm; Minimum Output Voltage-1: 1.2 V; Technology: BIPOLAR; Operating Temperature (TJ-Max): 125 Cel;

Details

SMBJ18CA

Meritek Electronics

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

FT232RQ-REEL

FTDI

FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.

Details

1N4148WT

Changzhou Galaxy Century Microelectronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148

Shanghai Lunsure Electronic Technology

RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Config: SINGLE;

Details

BAV99

Panasonic

MIXER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N2222A

Semiconductor Technology

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

LM317TG

Texas Instruments

LM317TG by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max output current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount, with a rectangular shape and through-hole terminals for easy installation.

Details

MURS160T3G

Onsemi

MURS160T3G by Onsemi is a single rectifier diode with a max output current of 2A and max repetitive peak reverse voltage of 600V. It has a fast recovery time of 0.075us, making it suitable for high voltage applications. The diode operates in temperatures ranging from -65 to 175°C, ideal for power systems requiring ultra-fast response.

Details

SS14

Frontier Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LL4148

Silicon Standard

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

BAV99

Weitronic Enterprise

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148WS

Rochester Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

MBR0520LT1

Onsemi

MBR0520LT1 by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring low power consumption in compact electronic devices. This single-configured diode is surface mountable and has a max repetitive peak reverse voltage of 20V, ideal for small outline package designs.

Details

LM317T

Onsemi

ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-PSFM-T3; Adjustability: ADJUSTABLE; Package Equivalence Code: SIP3,.1TB;

Details

DS1721S+T&R Technical Details

TYPE	DESCRIPTION
No. of Bits:	12
Minimum Supply Voltage:	2.7 V
Package Body Material:	PLASTIC/EPOXY
Maximum Operating Current:	1.25 mA
Maximum Accuracy (Cel):	1
Maximum Supply Voltage:	5.5 V
Sub-Category:	Other Sensors
Housing:	PLASTIC
Terminal Finish:	MATTE TIN
JESD-609 Code:	e3
Minimum Operating Temperature:	-55 Cel
Mounting Feature:	SURFACE MOUNT
Body Width:	3.91 inch
Sensors or Transducers Type:	TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL
No. of Terminals:	8
Package Equivalence Code:	SOP8,.25
Package Shape or Style:	RECTANGULAR
Termination Type:	SOLDER
Output Interface Type:	2-WIRE INTERFACE
Body Height:	1.395 mm
Additional Features:	COMPLIANCE TO MIL-150
Body Length/Diameter:	4.88 mm
Maximum Operating Temperature:	125 Cel
Power Supplies (V):	3/5

Category Top Products

LM335AZ

STMicroelectronics

TEMPERATURE SENSOR,ANALOG,VOLTAGE OUTPUT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Package Shape or Style: ROUND; Package Equivalence Code: SIP3,.1,50; Terminal Finish: Matte Tin (Sn);

700-101BAB-B00

Honeywell Sensing And Control

The Honeywell Sensing And Control 700-101BAB-B00 is a 0.9" wide RTD temperature sensor with a body height of 2.3mm and rectangular package style. It operates b/w -70°C to 500°C, has a max current of 1mA, and features wire termination. Ideal for through hole mounting applications in various industries.

MLX90632SLD-BCB-000-RE

Melexis N V

TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL;

KTY81/210,112

NXP Semiconductors

NXP Semiconductors' KTY81/210,112 is a temperature sensor with 2 terminals and resistance-based analog output. It operates b/w -55 to 150°C with positive temperature coefficient. The cylindrical sensor in plastic housing has nominal R0 of 1630 ohm, ideal for through-hole mounting applications.

DS600U/T&R

Maxim Integrated

DS600U/T&R by Maxim Integrated is a temperature sensor with voltage output. It operates b/w -40 to 125 °C, with accuracy of 0.75 °C and linearity of 0.20 °C. Suitable for surface mount applications in various industries.

HIH8131-000-001

Honeywell Sensing And Control

HIH8131-000-001 by Honeywell is a 14-bit temperature sensor with SPI interface. It operates b/w -40 to 125°C, suitable for various applications. The sensor has a rectangular shape, plastic housing, and requires 2.3-5.5V supply voltage for operation.

LMT01LPG

Texas Instruments

LMT01LPG by Texas Instruments is a temperature sensor with 13-bit resolution, operating from -50 to 150°C. It has a supply voltage range of 2-5.5V and low power consumption at 0.039mA max current. Ideal for applications requiring precise temperature monitoring in compact designs.

LMT86LP

Texas Instruments

LMT86LP by Texas Instruments is a temperature sensor with voltage output. It operates b/w -50°C to 150°C, offering high accuracy of 2.70 °C. With a supply voltage range of 2.2V to 5.5V, it is ideal for applications requiring precise temperature monitoring in various environments.

KTY82/110

NXP Semiconductors

NXP Semiconductors' KTY82/110 is a temperature sensor with resistance-based analog output. It operates b/w -55°C to 150°C, featuring a positive temperature coefficient of resistance. With a nominal R0 of 815 ohm, it is ideal for surface mount applications in various industries.

MCP9803-M/MS

Microchip Technology

MCP9803-M/MS by Microchip is a 12-bit temperature sensor with a max accuracy of 3 °C. It operates b/w -55 to 125 °C, suitable for various applications requiring precise temperature monitoring. The sensor has an output interface of 2-WIRE and comes in a compact SQUARE package for easy surface mounting.

LM20BIM7X

National Semiconductor

TEMPERATURE SENSOR,ANALOG,VOLTAGE OUTPUT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 5; Package Shape or Style: RECTANGULAR; Nominal Output Current: 10 uA; Housing: PLASTIC;

DHT11

Microchip Technology

DHT11 by Microchip is a temp sensor with 8-bit resolution, 5.5V max supply voltage, and 2.5mA max operating current. It's used for temp sensing in various applications like climate control systems due to its 1-wire interface and ±5°C accuracy.

TMP117NAIDRVT

Texas Instruments

TMP117NAIDRVT by Texas Instruments is a 16-bit temperature sensor with ±0.1°C accuracy, operating from -55 to 150°C. It features a 2-wire interface, digital output, and operates on 1.8-5.5V supply voltage range. Ideal for applications requiring precise temperature monitoring in compact spaces like IoT devices and wearables.

KTY82/110,235

NXP Semiconductors

NXP Semiconductors' KTY82/110,235 is a temperature sensor with a body size of 1.3" x 2.9mm x 1mm. It operates b/w -55°C to 150°C, providing an output current of up to 10mA. Ideal for surface mount applications in various industries requiring precise temperature monitoring.

AD590KH

Intersil

TEMPERATURE SENSOR,ANALOG,RESISTANCE BASED; Mounting Feature: THROUGH HOLE MOUNT; Package Shape or Style: ROUND; Nominal Output Current: 298.2 uA; Minimum Operating Temperature: -55 Cel; Minimum Supply Voltage: 4 V;

DS1821S

Dallas Semiconductor

TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; No. of Bits: 8; Minimum Operating Temperature: -55 Cel;

TMP275AIDGKRG4

Texas Instruments

TMP275AIDGKRG4 by Texas Instruments is a 12-bit temperature sensor with 2.7-5.5V supply, -55 to 127°C operating range, and ±0.5°C accuracy. It features a digital output interface, surface mounting, and is ideal for applications requiring precise temperature monitoring in compact spaces.

LIS2DTW12TR

STMicroelectronics

TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL;

NCT75DR2G

Onsemi

NCT75DR2G by Onsemi is a 12-bit temperature sensor with a max supply voltage of 5.5V and accuracy of 3 °C. It features a 2-wire interface, operates b/w -55 to 125 °C, and is ideal for applications requiring precise temperature monitoring in compact spaces.

TMP75AIDGKR

Texas Instruments

TMP75AIDGKR by Texas Instruments is a 12-bit temperature sensor with a supply voltage range of 2.7V to 5.5V. It features a 2-wire interface, operates b/w -40°C to 125°C, and consumes only 0.05mA current. Ideal for applications requiring precise temperature monitoring in compact spaces like consumer electronics and industrial equipment.