Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

All prices are in USD

Bulk

QTY	Unit Price	Ext Price
1,854	$15.746	$29,193.548

LTM4622IY#PBF

Manufacturer

Linear Technology
Manufacturer's Part Number

LTM4622IY#PBF
Description

SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 25; Package Code: BGA; Package Shape: SQUARE; Surface Mount: YES;
Datasheet

Datasheet

1854 In Stock

Popular Products

LM358AN

National Semiconductor

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

LM358DR2G

Onsemi

LM358DR2G by Onsemi is a dual operational amplifier with 7000uV max input offset voltage and 70dB nominal CMRR. Ideal for applications requiring low bias current such as sensor interfaces, signal conditioning circuits, and audio amplifiers. Package style: Small Outline, Technology: Bipolar, Unity Gain Bandwidth: 1000 kHz.

Details

ULN2803A

Motorola

NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Terminal Position: DUAL; JESD-30 Code: R-PDIP-T18;

Details

1N4148WT

Sangdest Microelectronics (Nanjing)

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

EU2B-YS3103F

Idec

ROTARY SWITCH;

Details

SZNUP2105LT1G

Onsemi

SZNUP2105LT1G by Onsemi is a Transient Suppression Device with 2 elements in a common anode configuration. It has a max non-repetitive peak reverse power dissipation of 350W and breakdown voltage of 29.1V. Ideal for applications requiring bidirectional polarity protection, such as automotive electronics and industrial equipment due to its AEC-Q101 compliance and high clamping voltage of 44V.

Details

BAV99

Jgd Semiconductors

RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 150 Cel;

Details

BSS84-7-F

Diodes Incorporated

Diodes Inc. BSS84-7-F is a P-channel FET with 50V DS breakdown voltage, 0.13A max drain current, and 10 ohm RDS(on). Ideal for switching applications, it features a single configuration with built-in diode in a small outline package. Operating in enhancement mode at up to 150°C, it has Gull Wing terminals and matte tin finish.

Details

2N7002

Nte Electronics

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .115 A; No. of Terminals: 3;

Details

MMBT3906LT1G

Onsemi

MMBT3906LT1G by Onsemi is a PNP BJT with VCEsat of 0.4V, hFE of 30, and fT of 250MHz. Ideal for small signal applications in electronics due to its low power dissipation, high transition frequency, and compact SOT-23 package. Suitable for use in temperature-sensitive environments with an operating range from -65°C to 150°C.

Details

BSS138

National Semiconductor

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Feedback Capacitance (Crss): 10 pF; JEDEC-95 Code: TO-236AB;

Details

EPCS4SI8N

Intel

EPCS4SI8N by Intel is a small outline flash memory with 512Kx8 organization, operating at 3.3V. It features a max clock frequency of 40MHz and endurance of 100k write/erase cycles. Ideal for industrial applications requiring configuration memory with serial interface and low standby current consumption.

Details

MS3V-T1R32.768KHZ+/-20PPM12.5PF

Golledge Electronics

MS3V-T1R32.768KHZ+/-20PPM12.5PF by Golledge Electronics is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 12.5 pF load capacitance. It is ideal for applications requiring precise timing in temperature-sensitive environments due to its -40 to 85 °C operating range.

Details

2N2222A

Crimson Semiconductor

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

1N4148

Renesas Electronics

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

LM358N

Freescale Semiconductor

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

BSS138DW-7-F

Diodes Incorporated

BSS138DW-7-F by Diodes Incorporated is a N-channel small signal FET with a min DS breakdown voltage of 50V. It is used for switching applications and operates in enhancement mode. This surface mount transistor has a max drain current of 0.2A and a max power dissipation of 0.2W.

Details

LM555CN

National Semiconductor

PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;

Details

MBR0520LT1G

Onsemi

MBR0520LT1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, has a peak reflow temperature of 260°C, and a repetitive peak reverse voltage of 20V. This diode is ideal for applications requiring high-speed switching in compact electronic devices.

Details

LM2675M-ADJ/NOPB

Texas Instruments

LM2675M-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with 1A output current, 37V max output voltage, and 260kHz max switching frequency. Ideal for automotive applications due to its -40°C to 125°C operating temperature range and compact small outline package design.

Details

LTM4622IY#PBF Technical Details

TYPE	DESCRIPTION
Package Body Material:	PLASTIC/EPOXY
Control Mode:	CURRENT-MODE
Maximum Time At Peak Reflow Temperature (s):	30
Width (mm):	6.25 mm
Maximum Seated Height:	1.92 mm
Surface Mount:	YES
Terminal Finish:	Tin/Silver/Copper (Sn/Ag/Cu)
Switcher Config:	BUCK
No. of Terminals:	25
Terminal Position:	BOTTOM
Package Style (Meter):	GRID ARRAY
JESD-30 Code:	S-PBGA-B25
Package Shape:	SQUARE
Terminal Form:	BALL
Maximum Operating Temperature:	125 Cel
Package Code:	BGA
Control Technique:	PULSE WIDTH MODULATION
Moisture Sensitivity Level (MSL):	4
Maximum Switching Frequency:	1000 kHz
Minimum Input Voltage:	3.6 V
Maximum Input Voltage:	20 V
JESD-609 Code:	e1
Minimum Operating Temperature:	-40 Cel
No. of Functions:	1
Nominal Input Voltage:	12 V
Other IC type:	SWITCHING REGULATOR
Length:	6.25 mm
Additional Features:	OUTPUT VOLTAGE RANGE FROM 0.6 VOLT TO 5.5 VOLT
Peak Reflow Temperature (C):	260
Terminal Pitch:	1.27 mm
Temperature Grade:	AUTOMOTIVE

Category Top Products

TPS560430X3FDBVR

Texas Instruments

TPS560430X3FDBVR by Texas Instruments is a switching regulator with 0.6A output current, 1V min output voltage, and 3.3V nominal output voltage. It is used in automotive applications due to its compact size, pulse width modulation control technique, and wide operating temperature range from -40°C to 125°C.

LTM8055MPY#PBF

Linear Technology

SWITCHING REGULATOR; Temperature Grade: MILITARY; No. of Terminals: 121; Package Code: BGA; Package Shape: SQUARE; Surface Mount: YES;

LMZ14202HTZ/NOPB

Texas Instruments

LMZ14202HTZ/NOPB by Texas Instruments is a switching regulator with 2A output current, 5-24V output voltage range, and 1000kHz max switching frequency. Ideal for automotive applications due to its -40 to 125°C operating temperature range and compact size of 10.16mm x 9.85mm x 4.82mm.

LM2674MX-5.0/NOPB

Texas Instruments

LM2674MX-5.0/NOPB by Texas Instruments is a voltage-mode switching regulator with 8 terminals, operating b/w -40 to 125°C. It offers a max output current of 0.5A, nominal output voltage of 5V, and supports buck configuration. Ideal for automotive applications due to its compact size (4.9mm x 3.9mm) and DMOS technology with PWM control technique at a max frequency of 260kHz.

LM2596S-5.0/NOPB

National Semiconductor

SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 5; Package Code: TO-263; Package Shape: RECTANGULAR; Surface Mount: YES;

LTC3646EDE-1#PBF

Analog Devices

LTC3646EDE-1#PBF by Analog Devices is a current-mode switching regulator with 14 terminals, operating b/w -40 to 85°C. It has a buck switcher configuration, supporting input voltages from 4V to 40V and output voltage of 5V. Ideal for industrial applications requiring efficient power management in compact spaces.

TPS61170DRVT

Texas Instruments

TPS61170DRVT by Texas Instruments is a switching regulator with a max output current of 1.44A and max output voltage of 38V. It operates in a temperature range from -40 to 85°C, making it suitable for industrial applications requiring precise current-mode control. With a compact square package style and pulse width modulation technique, it is ideal for space-constrained designs needing efficient power conversion.

LM51561HPWPR

Texas Instruments

LM51561HPWPR by Texas Instruments is a switching controller with a 12V nominal input voltage, operating b/w -40 to 150°C. It features a buck-boost switcher configuration, current-mode control mode, and pulse width modulation technique. Ideal for automotive applications due to AEC-Q100 screening level and moisture sensitivity level of 3.

L7987LTR

STMicroelectronics

L7987LTR by STMicroelectronics is a voltage-mode switching regulator with 16 terminals, operating at a max frequency of 1650 kHz. With a max output current of 3.45 A and input voltage range from 4.5 V to 61 V, it is ideal for applications requiring efficient power conversion in compact spaces.

LMZ14203HTZ/NOPB

Texas Instruments

LMZ14203HTZ/NOPB by Texas Instruments is a switching regulator with 3A output current, 5-24V output voltage range, and 1000kHz max switching frequency. Ideal for automotive applications due to its -40 to 125°C operating temperature range and compact design. Suitable for various power management needs in automotive electronics.

TPS61200DRCRG4

Texas Instruments

TPS61200DRCRG4 by Texas Instruments is a switching regulator with max output voltage of 5.5V, operating temp range -40 to 85°C, and max output current of 1.5A. Ideal for battery charge control applications due to boost switcher config, PWM control mode, and compact square package design.

UCC28C45DGKR

Texas Instruments

UCC28C45DGKR by Texas Instruments is a voltage-mode switching controller with a max output current of 1A and a max switching frequency of 1000kHz. It operates in an industrial temperature grade range from -40°C to 105°C, making it suitable for various power management applications. With a small outline package style and surface-mount capability, this IC is ideal for compact designs requiring efficient pulse width modulation control.

UCC28070PWR

Texas Instruments

UCC28070PWR by Texas Instruments is a current-mode power factor controller with a boost switcher configuration. It operates at a max switching frequency of 300 kHz and has a max output current of 0.75 A. Ideal for automotive applications due to its wide temperature range and small outline package style.

LM2596S-50

First Components International

LM2596S-50 by First Components International is a switching regulator with 5 terminals, operating b/w -40 to 125°C. It has a max output current of 7.5A and nominal input voltage of 12V, suitable for automotive applications due to its technology and compact design.

LMZ23605TZE/NOPB

Texas Instruments

LMZ23605TZE/NOPB by Texas Instruments is a switching regulator with 5A output current, 950 kHz max switching frequency, and 3.3V nominal output voltage. Ideal for industrial applications requiring efficient power management in a compact package.

TPS54202HDDCR

Texas Instruments

TPS54202HDDCR by Texas Instruments is a switching regulator with 2A output current, 500kHz max frequency, and -40 to 125°C operating temp. Ideal for automotive applications due to its small size, PWM control mode, and buck switcher configuration.

MC34063AP1G

Shenzhen Changyuntong Ic Design

SWITCHING REGULATOR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;

LM3478MM

National Semiconductor

SWITCHING CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: TSSOP; Package Shape: SQUARE; Surface Mount: YES;

LM2675M-5.0/NOPB

Texas Instruments

LM2675M-5.0/NOPB by Texas Instruments is a voltage-mode switching regulator with 1A output current, 5V nominal output voltage, and 260kHz max switching frequency. Ideal for automotive applications due to its -40 to 125°C operating temperature range and compact small outline package style.

XTPS560430XFDBVR

Texas Instruments

XTPS560430XFDBVR by Texas Instruments is a small outline switching regulator with 6 terminals. It operates b/w -40 to 125°C, with an output voltage range of 1-24V and max current of 0.6A. Ideal for applications requiring pulse width modulation control at frequencies up to 2100kHz.