Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

LF2005-S

Manufacturer

Lem International Sa
Manufacturer's Part Number

LF2005-S
Description

Other Sensors/Transducers;
Datasheet

Datasheet

Not In Stock

Popular Products

BSS138-7-F

SPC TECHNOLOGY/ MULTICOMP

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain Current (ID): .2 A; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;

Details

2N2222A

Loras Industries

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

1N4148

Sangdest Microelectronics (Nanjing)

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

FDN306P

Onsemi

FDN306P by Onsemi is a P-CHANNEL FET with 12V DS Breakdown Voltage, ideal for SWITCHING applications. It features SINGLE configuration with BUILT-IN DIODE and GULL WING terminals. Operating in ENHANCEMENT MODE, it has a max ID of 2.6A and 0.04 ohm RDS(on), suitable for small outline packages at temperatures ranging from -55 to 150°C.

Details

2N7002,215

NXP Semiconductors

2N7002,215 by NXP Semiconductors is a small signal N-CHANNEL FET with a min DS breakdown voltage of 60V and max drain current of 0.3A. It is used for switching applications in enhancement mode, operates b/w -65 to 150 °C, and has a max power dissipation of 0.2W.

Details

1N4148

General Semiconductor

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

LM358MX

Texas Instruments

LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.

Details

LM358D-T

NXP Semiconductors

LM358D-T by NXP Semiconductors is a dual operational amplifier with 70dB CMRR, 1000kHz unity gain bandwidth, and 9000uV max input offset voltage. Widely used in commercial applications due to its small outline package and low bias current of 0.5uA.

Details

LM358AN

STMicroelectronics

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

SMBJ18CA

Bytesonic Electronics

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

MMBT2222ALT1G

Onsemi

MMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, max power dissipation of 0.3W, and hFE of 75. Ideal for switching applications, it operates b/w -55 to 150 °C with a max collector-emitter voltage of 40V. This surface-mount device has a transition frequency of 300MHz and turn-on time of 35ns.

Details

SS14

Goodwork Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

GRM155R71H103KA88D

Murata Manufacturing

The Murata Manufacturing GRM155R71H103KA88D is a ceramic capacitor with 0.01uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and high reliability.

Details

2N2222A

Ksl Microdevices

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

LM107H

Intersil

OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Nominal Common Mode Reject Ratio: 96 dB;

Details

1N4148WS

Fairchild Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148WT

Continental Device India

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BSS138

Diodes Incorporated

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Minimum DS Breakdown Voltage: 50 V; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;

Details

1N4148WS

Diotec Semiconductor Ag

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148WT

Surge Components

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

Category Top Products

L07P003D15

Tamura

Other Sensors/Transducers;

LIS3DSH

STMicroelectronics

LIS3DSH by STMicroelectronics is a 16-terminal accelerometer with a supply voltage range of 1.71-3.6V, outputting digital voltage from 0.18-1.62V. It operates b/w -40 to 85°C and is ideal for applications requiring precise motion sensing in compact spaces like wearables or IoT devices.

ACS713ELCTR-20A-T

Allegro MicroSystems

ACS713ELCTR-20A-T by Allegro MicroSystems is a current sensor with 8 terminals, operating voltage range of 4.5V to 5.5V, and outputting analog voltage. It has a compact rectangular shape measuring 3.9" x 1.47mm x 4.9mm, suitable for surface mount applications in temperature ranges from -40°C to 85°C. Ideal for precise current measurements in various electronic systems.

AT42QT1060-MMUR

Microchip Technology

AT42QT1060-MMUR by Microchip is a capacitive touch sensor with 28 terminals, operating voltage range of 1.8V to 5.5V, and digital output type. It has a compact square package design ideal for surface mount applications in various electronic devices such as consumer electronics and industrial control systems. Temperature range from -40°C to 85°C ensures reliable performance in different environments.

LM94022QBIMG/NOPB

National Semiconductor

Other Sensors/Transducers; Mounting Feature: SURFACE MOUNT; No. of Terminals: 5; Package Shape or Style: RECTANGULAR; Package Body Material: PLASTIC/EPOXY; Minimum Operating Temperature: -50 Cel;

LTR-308ALS-01

Lite-on Technology

AMBIENT LIGHT SENSOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Output Type: DIGITAL VOLTAGE; Package Shape or Style: SQUARE; Package Equivalence Code: SOLCC6,.8,25;

QT60160-ISG

Microchip Technology

TOUCH SENSOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 32; Output Type: DIGITAL VOLTAGE; Package Shape or Style: SQUARE; Output Range: 0.20-4.20V;

ACS715LLCTR-30A-T

Allegro MicroSystems

CURRENT SENSOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Output Type: ANALOG VOLTAGE; Package Shape or Style: RECTANGULAR; Package Equivalence Code: SOP8,.25;

AT42QT1011-MAHR

Microchip Technology

AT42QT1011-MAHR by Microchip: Cap. touch sensor, 8 terminals, 1.8-5.5V supply, digital output (0.50-2.30V). Ideal for automotive applications due to TS 16949 screening, -40 to 85°C operating temp range and compact rectangular package design.

SNG-SPRC-002

Honeywell Sensing And Control

SPEED SENSOR;

ADXL367BCCZ-RL7

Analog Devices

ACCELEROMETER;

1-101400-01

Sensirion Ag

1-101400-01 by Sensirion Ag is a humidity and temperature sensor with a package body made of plastic. It operates b/w -40 to 125°C, with a supply voltage range of 2.15V to 5.5V. This sensor has digital output and is suitable for surface mount applications in various industries.

D6F-10A5-000

Omron

Other Sensors/Transducers;

ACS725LLCTR-10AB-T

Allegro MicroSystems

ACS725LLCTR-10AB-T by Allegro MicroSystems is a current sensor with 8 terminals. It operates b/w -40°C to 150°C, providing analog voltage output at a max supply voltage of 3.6V. This rectangular surface-mount sensor is ideal for automotive applications due to its AEC-Q100 screening level.

2308030

Phoenix Contact

Phoenix Contact 2308030 is a CURRENT SENSOR with output range of 4-20mA. It operates b/w -40 to 65 °C and has a supply voltage range of 20-30 V. Ideal for DIN RAIL MOUNT applications due to its compact size (33.8" x 70mm x 90mm).

LM71CIMFX/NOPB

National Semiconductor

Other Sensors/Transducers; Mounting Feature: SURFACE MOUNT; No. of Terminals: 5; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -40 Cel; Package Equivalence Code: TSOP5/6,.11,37;

MCS1803GS-20-Z

Monolithic Power Systems

MCS1803GS-20-Z by Monolithic Power Systems is a current sensor with 2.5% accuracy, 0.5-4.5V analog output range, and operates b/w -40 to 125°C. It has a rectangular shape, surface mount feature, and is used in applications requiring precise current monitoring in the range of 4.5-5.5V supply voltage.

LAH125-P

Lem International Sa

LAH125-P by Lem International Sa is a CURRENT SENSOR with 0-125mA output range. It operates b/w -40 to 85 °C and requires 11.4-12.6 V supply voltage. With RECTANGULAR shape, it has 11 terminals for THROUGH HOLE MOUNT applications.

ACS711ELCTR-12AB-T

Allegro MicroSystems

ACS711ELCTR-12AB-T by Allegro MicroSystems is a current sensor with a supply voltage range of 3V to 5.5V and output as analog voltage. It has a response time of 4.6us, making it suitable for applications requiring precise current measurements in tight spaces or surface mount environments at temperatures ranging from -40°C to 85°C.

ACS770KCB-150U-PSF-T

Allegro MicroSystems

ACS770KCB-150U-PSF-T by Allegro MicroSystems is a current sensor with 5V power supply, AEC-Q100 screening level, and single-ended output circuit. It operates b/w -40°C to 125°C, ideal for automotive applications due to its BICMOS technology and through-hole mounting feature.