Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

CSCA0600A000B15B01

Manufacturer

Honeywell Sensing And Control
Manufacturer's Part Number

CSCA0600A000B15B01
Description

CURRENT SENSOR; No. of Terminals: 4; Output Type: VOLTAGE OUTPUT; Package Shape or Style: RECTANGULAR; Body Width: 29 inch; Maximum Supply Voltage: 15.75 V;
Datasheet

Datasheet

Not In Stock

Popular Products

SS14

Taiwan Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BAV99

Temic Semiconductors

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

EU2B-YS303C

Idec

ROTARY SWITCH;

Details

1N4148

Central Semiconductor

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

LM358D-T

NXP Semiconductors

LM358D-T by NXP Semiconductors is a dual operational amplifier with 70dB CMRR, 1000kHz unity gain bandwidth, and 9000uV max input offset voltage. Widely used in commercial applications due to its small outline package and low bias current of 0.5uA.

Details

LM78L05ACMX/NOPB

Texas Instruments

LM78L05ACMX/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.1A. It operates b/w 0-125°C, has a dropout voltage of 1.6V, and can handle input voltages up to 30V making it ideal for various electronic applications requiring stable power supply.

Details

SMBJ18CA

Zowie Technology

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

FDN5618P

Onsemi

FDN5618P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage. It features a single configuration with built-in diode, suitable for switching applications. With 10A IDM and 0.17 ohm RDS(on), it operates in the temperature range of -55 to 150 °C, making it ideal for various electronic devices.

Details

BSS138PS,115

Nexperia

N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 2; No. of Terminals: 6; Minimum DS Breakdown Voltage: 60 V;

Details

DS18B20Z+T&R

Analog Devices

DS18B20Z+T&R by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. The sensor comes in a plastic package suitable for surface mount applications, with a max supply voltage of 5.5V and min of 3V.

Details

2N7002

Jiangsu Changjiang Electronics Technology

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Operating Mode: ENHANCEMENT MODE; Transistor Application: SWITCHING;

Details

DS18B20U+

Analog Devices

DS18B20U+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.

Details

1N4148WS

Panjit International

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

ECS-.327-12.5-17X-TR

Ecs International

ECS-0.327-12.5-17X-TR by Ecs International is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing in temperature ranges from -40 to 85 °C, such as telecommunications and industrial automation.

Details

2N7002

Kec

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;

Details

1N4148W-7-F

Diodes Incorporated

1N4148W-7-F by Diodes Inc. is a single rectifier diode with 0.715V max forward voltage and 100V max reverse voltage. Ideal for applications requiring fast switching speeds, it has a small outline package style and matte tin terminal finish, making it suitable for surface mount PCB designs.

Details

RN41N-I/RM

Microchip Technology

Microchip Technology's RN41N-I/RM is a telecom IC with 35 terminals, operating from -40 to 85°C. It has a supply voltage of 3.3V and is surface mountable in industrial applications. The package style is rectangular, measuring 13.2mm x 20.1mm with a seated height of 2.2mm, suitable for telecom interface functions.

Details

L7805CV

STMicroelectronics

L7805CV by STMicroelectronics is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in electronic circuits.

Details

2N2222A

Fairchild Semiconductor

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

BSS138LT1G

Onsemi

BSS138LT1G by Onsemi is a N-CHANNEL FET with 50V DS Breakdown Voltage, 0.2A Drain Current, and 3.5 ohm On Resistance. Ideal for SWITCHING applications due to its ENHANCEMENT MODE operation and built-in DIODE. Operates b/w -55 to 150 °C with small outline package style for surface mount assembly.

Details

CSCA0600A000B15B01 Technical Details

TYPE	DESCRIPTION
Minimum Supply Voltage:	14.25 V
Other Names:	480-6168 CSCA0600A000B15B01-ND
Maximum Operating Current:	17 mA
Maximum Supply Voltage:	15.75 V
Maximum Accuracy (%):	2
Output Type:	VOLTAGE OUTPUT
Minimum Operating Temperature:	-10 Cel
Body Width:	29 inch
Sensors or Transducers Type:	CURRENT SENSOR
No. of Terminals:	4
Package Shape or Style:	RECTANGULAR
Termination Type:	CONNECTOR
Body Height:	35 mm
Body Length/Diameter:	40 mm
Maximum Operating Temperature:	80 Cel

Category Top Products

L06P800S05

Tamura

Other Sensors/Transducers;

HLSR32-SM/SP33

Lem International Sa

HLSR32-SM/SP33 by Lem International Sa is a current sensor with voltage output. It operates b/w -40°C to 105°C, with supply voltage range of 3.135V to 3.465V. This sensor has 10 terminals and is designed for surface mount applications.

AS7262-BLGT

Ams Ag

SPECTRUM SENSOR;

TMCS1108A2UQDR

Texas Instruments

TMCS1108A2UQDR by Texas Instruments is a current sensor with 8 terminals, operating voltage range of 3-5V. It offers analog voltage output, suitable for surface mount applications in temperature range -40 to 85°C.

SNG-SPSC-001

Honeywell Sensing And Control

SPEED SENSOR;

TMCS1107A4BQDR

Texas Instruments

TMCS1107A4BQDR by Texas Instruments is a current sensor with 8 terminals. It operates b/w -40°C to 85°C, producing analog voltage output. With a supply voltage range of 3V to 5.5V, it is ideal for surface mount applications in various industries.

TEMD6200FX01

Vishay Intertechnology

The Vishay Intertechnology TEMD6200FX01 is a surface mount ambient light sensor with AEC-Q101 screening. It operates b/w -40°C to 100°C, making it suitable for automotive applications. The rectangular sensor has a body width of 1.25" and a height of 0.85mm.

DVL1500

Lem International Sa

VOLTAGE SENSOR;

BPS230-D3P0-S10E

Bourns

Other Sensors/Transducers;

LSM6DSO16ISN

STMicroelectronics

Other Sensors/Transducers; null: ANALOG CIRCUIT;

IVT-S-1K-U3-I-CAN1-12/24

Isabellenhuette Heusler & Kg

CURRENT SENSOR;

HAIS100-P

Lem International Sa

HAIS100-P by Lem International Sa is a current sensor with 6 terminals, operating voltage range of 4.75-5.25 V, and outputting analog voltage. It has a compact rectangular design measuring 33x14x29.5 mm, suitable for through-hole mounting applications in temperature range -40 to 85°C.

SHT41-AD1B-R3

Sensirion Ag

Sensirion Ag's SHT41-AD1B-R3 is a humidity and temperature sensor with 4 terminals. It operates b/w -40 to 125°C, outputting digital voltage at a supply voltage range of 1.08V to 3.6V. This square-shaped sensor in plastic/epoxy package is ideal for surface mount applications.

LESR15-NP/SP1

Lem International Sa

CURRENT SENSOR;

SHT31-DIS-P2.5KS

Sensirion Ag

Sensirion Ag's SHT31-DIS-P2.5KS is a humidity and temperature sensor with 8 terminals, operating from -40 to 125°C. It features digital output, open-drain configuration, and CMOS technology. Ideal for surface mount applications due to its compact square package measuring 2.5mm x 2.5mm x 0.9mm in size.

T3022-1-5K-1-MX

Amphenol

Other Sensors/Transducers;

LIS2DH12TR

STMicroelectronics

LIS2DH12TR by STMicroelectronics is a 3-axis accelerometer with digital voltage output. It operates b/w -40 to 85°C, with supply voltage range of 1.71-3.6V. Ideal for applications requiring precise motion sensing in compact spaces like wearables and IoT devices.

CCT261631-30-06-00

TDK

CURRENT SENSOR;

SHT40I-HD1B-R2

Sensirion Ag

Sensirion Ag's SHT40I-HD1B-R2 sensor features a 4-terminal design, operating voltage range of 4.5-5.5V, and output range of 0.50-4.50V for humidity and temperature sensing applications. With a compact square shape (1.5mm x 1.5 inch x 0.54 mm), it is ideal for surface mount installations in environments ranging from -40 to 125°C.

TMCS1108A3UQDRQ1

Texas Instruments

TMCS1108A3UQDRQ1 by Texas Instruments is a current sensor with 8 terminals, operating voltage range of 3-5V, and AEC-Q100 screening. It measures current output as analog voltage in temperatures from -40 to 125°C. Ideal for automotive applications due to its surface mount package and high temperature tolerance.