Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

DHABS/134

Manufacturer

Lem International Sa
Manufacturer's Part Number

DHABS/134
Description

CURRENT SENSOR; Output Type: CURRENT OUTPUT; Package Shape or Style: ROUND; Maximum Operating Temperature: 125 Cel; Maximum Supply Voltage: 5.25 V; Minimum Supply Voltage: 4.75 V;
Datasheet

Datasheet

Not In Stock

Popular Products

LM555CM

Renesas Electronics

Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;

Details

1N4148WT

Formosa Microsemi

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LAN8720AI-CP-TR

Microchip Technology

LAN8720AI-CP-TR by Microchip is an Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85 °C. It features a 3.3 V supply voltage, 54 mA supply current, and TS 16949 screening level. Ideal for network interfaces in industrial applications due to its compact square package and low profile design.

Details

PIC18F4550-I/P

Microchip Technology

PIC18F4550-I/P by Microchip Technology is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it ideal for industrial applications requiring low power consumption and high-speed data processing. With 2048 RAM bytes and 256 Data EEPROM size, this CMOS technology-based microcontroller offers versatile performance in various embedded systems.

Details

1N4148

Grande Electronics

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

2N7002

Inter F E T

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;

Details

LM358D-T

NXP Semiconductors

LM358D-T by NXP Semiconductors is a dual operational amplifier with 70dB CMRR, 1000kHz unity gain bandwidth, and 9000uV max input offset voltage. Widely used in commercial applications due to its small outline package and low bias current of 0.5uA.

Details

BAV99

National Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

ULN2803ADWR

Texas Instruments

ULN2803ADWR by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85°C, has a max supply voltage of 3V, and is ideal for buffer or inverter-based applications requiring sink current flow direction.

Details

2N7002-7-F

Diodes Incorporated

Diodes Inc. 2N7002-7-F is a N-channel FET with 60V DS breakdown voltage, 0.115A max drain current, and 13.5 ohm RDS(on). Ideal for switching applications in enhancement mode operation. Features Gull Wing terminals, small outline package style, and operates up to 150°C.

Details

EU2B-YS2J03C

Idec

ROTARY SWITCH;

Details

2N7002

Diodes Incorporated

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Form: GULL WING; JESD-30 Code: R-PDSO-G3;

Details

1N4148

Weitron Technology

RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb);

Details

MBRM140T1G

Onsemi

MBRM140T1G by Onsemi is a Schottky rectifier diode with 40V max repetitive peak reverse voltage, 1A max output current, and 0.3V max forward voltage. It is used in applications requiring small outline surface mount diodes for efficient power management.

Details

2N7002

Siliconix

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain Current (ID): .115 A; Operating Mode: ENHANCEMENT MODE;

Details

SS14

Silicon Standard

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

M24308/2-1F

Cristek Interconnects

D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Rows Loaded: 2; Shell Size: 1/E; Filter Feature: NO;

Details

2N7002

Motorola

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified; Minimum Operating Temperature: -55 Cel;

Details

LM317TG

Texas Instruments

LM317TG by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max output current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount, with a rectangular shape and through-hole terminals for easy installation.

Details

DS18B20U+

Analog Devices

DS18B20U+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.

Details

DHABS/134 Technical Details

TYPE	DESCRIPTION
Minimum Supply Voltage:	4.75 V
Package Body Material:	PLASTIC, PBT
Sensors or Transducers Type:	CURRENT SENSOR
Maximum Supply Voltage:	5.25 V
Package Shape or Style:	ROUND
Output Type:	CURRENT OUTPUT
Body Height:	24 mm
Additional Features:	IP 69K
Maximum Operating Temperature:	125 Cel
Minimum Operating Temperature:	-40 Cel

Category Top Products

MMA8652FCR1

NXP Semiconductors

MMA8652FCR1 by NXP Semiconductors is a 3-axis accelerometer with a max supply voltage of 3.6V and a min operating temperature of -40°C. It has a digital voltage output range of 0.18-1.62V and is commonly used in applications such as motion sensing and orientation detection in various electronic devices.

ACS773LCB-100B-SMT-T

Allegro MicroSystems

CURRENT SENSOR;

A111-001-T&R

Acconeer Ab

A111-001-T&R by Acconeer Ab is a sensor module with a plastic/epoxy body. It operates at a voltage range of 1.71V to 1.89V and has an output range of 0.4-1.6V, making it suitable for various applications requiring digital voltage sensing in a compact form factor.

SCD41-D-R1

Sensirion Ag

GAS SENSOR;

ACS722KMATR-10AB-T

Allegro MicroSystems

ACS722KMATR-10AB-T by Allegro MicroSystems is a current sensor with 16 terminals, operating b/w -40 to 125°C. It offers an analog voltage output range of 0.33-2.97V and operates on a supply voltage b/w 3-3.6V. This rectangular-shaped sensor, made of plastic, is ideal for surface mount applications in various industries.

AT42QT2120-MMHR

Microchip Technology

AT42QT2120-MMHR by Microchip is a capacitive touch sensor with 20 terminals, operating voltage range of 1.8V to 5.5V, and digital output type. It has a compact square package design measuring 3mm x 3mm x 0.78mm, suitable for surface mount applications in various electronic devices like consumer electronics and industrial control systems. Operating temperature ranges from -40°C to 85°C, providing reliable touch sensing capabilities in diverse environments.

AS7343-DLGT

Ams Ag

AS7343-DLGT by Ams Ag is a SPECTRUM SENSOR with 8 terminals, operating voltage range of 1.7V to 1.98V, and digital output. It has a compact rectangular package suitable for surface mount applications in various industries like automotive and consumer electronics.

LTR-303ALS-01

Lite-on Technology

LTR-303ALS-01 by Lite-on Tech is an ambient light sensor with 6 terminals, operating voltage range of 2.4V to 3.6V, and digital output type. It has a compact square package suitable for surface mounting applications in various devices like smartphones and tablets due to its high accuracy of 25%.

DS1631S

Dallas Semiconductor

Other Sensors/Transducers; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Maximum Operating Current: 1.25 mA; JESD-609 Code: e0;

SCR2100-D08-05

Murata Manufacturing

GYROSCOPE;

LM75AD

Philips Semiconductors

Other Sensors/Transducers; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Package Equivalence Code: SOP8,.25; Package Body Material: PLASTIC/EPOXY;

ACS714LLCTR-20A-T

Allegro MicroSystems

ACS714LLCTR-20A-T by Allegro MicroSystems is a current sensor with 8 terminals. It operates b/w -40°C to 150°C, providing analog voltage output. With a supply voltage range of 4.5V to 5.5V, it is ideal for surface mount applications in various industries.

ACS725LLCTR-30AB-T

Allegro MicroSystems

ACS725LLCTR-30AB-T by Allegro MicroSystems is a current sensor with 3V to 3.6V supply voltage range, AEC-Q100 screening level, and analog voltage output. It is ideal for automotive applications due to its BICMOS technology, -40°C to 150°C operating temperature range, and surface mounting feature.

LAH100-P

Lem International Sa

LAH100-P by Lem International Sa is a current sensor with 9 terminals, plastic housing, and 45 ohm resistance. It operates b/w -25 to 85 °C with a supply voltage range of 11.4V to 12.6V. Ideal for applications requiring current output sensing in various industries.

LIS2DH

STMicroelectronics

LIS2DH by STMicroelectronics is a 3-axis accelerometer with digital output voltage range of 0.18-1.62V, suitable for applications requiring motion sensing and orientation detection. It operates b/w -40 to 85°C temperature range, with a supply voltage range of 1.71-3.6V, making it ideal for various IoT and wearable devices due to its small form factor (2x2mm) and surface mount feature.

ACS711KLCTR-25AB-T

Allegro MicroSystems

ACS711KLCTR-25AB-T by Allegro MicroSystems is a current sensor with 3.3V power supply, 5.5mA max operating current, and 4.6us response time. Ideal for applications requiring precise analog voltage output in a compact surface mount package.

NJR4266F3C1

New Japan Radio

SENSOR MODULE;

FX29K0-100A-0050-L

TE Connectivity

TE Connectivity's FX29K0-100A-0050-L is a force sensor with 2.7V to 3V supply voltage range. It offers digital output, operates b/w 0°C to 50°C, and has a round shape with a diameter of 19.7mm. Ideal for applications requiring precise force measurement in various industries.

ACS725KMATR-30AB-T

Allegro MicroSystems

CURRENT SENSOR; Terminal Finish: MATTE TIN;

FC2231-0000-0100-L

TE Connectivity

TE Connectivity's FC2231-0000-0100-L is a force sensor with a max supply voltage of 5V and an accuracy of 1%. It operates in temperatures ranging from -40°C to 85°C, providing an output range of 0.5-4.5V. This sensor is commonly used for measuring force in various applications.