Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

453-00041C

Manufacturer

Laird Technologies
Manufacturer's Part Number

453-00041C
Description

TELECOM CIRCUIT; Maximum Time At Peak Reflow Temperature (s): 30; Peak Reflow Temperature (C): 260;
Datasheet

Datasheet

Not In Stock

Popular Products

CSNF651

Honeywell Sensing And Control

CSNF651 by Honeywell Sensing And Control is an industrial-grade analog circuit with 3 terminals. It operates b/w -40 to 85°C, supporting supply voltages from -15V to 15V. Ideal for applications requiring a special shape rectangular package style and through-hole terminal form.

Details

1N4148WS

Bytesonic Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

M39029/56-351

Itt Cannon

CONNECTOR ACCESSORY; MIL Conformity: YES; Terminal Type: WIRE; IEC Conformity: NO; Alternate Contact Sources: ITT CANNON; Associated Military - Specifications: MIL-C-38999;

Details

350766-1

TE Connectivity

TE Connectivity 350766-1 is a rectangular power connector with 0.25" mating contact pitch, rated for 600V and operating temperatures from -55 to 105°C. It has a durable design with POLYAMIDE insulator material, suitable for commercial applications requiring secure crimp termination in cable mounting setups.

Details

BSS138-7-F

Diodes Incorporated

Diodes Inc. BSS138-7-F is a N-channel FET with 50V DS breakdown voltage, 0.2A max drain current, and 3.5 ohm RDS(on). Ideal for switching applications in small outline packages with matte tin finish, operating up to 150°C peak reflow temp.

Details

1N4148WS

Formosa Microsemi

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

MMBT3904LT1G

Onsemi

MMBT3904LT1G by Onsemi is a NPN BJT with max. collector-emitter voltage of 40V, hFE of 30, and fT of 300MHz. Ideal for small signal applications in electronics due to its compact size, high transition frequency, and low power dissipation capabilities.

Details

LL4148

General Semiconductor

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

1N4148WS

General Instrument

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N7002

Panjit International

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 40; Minimum DS Breakdown Voltage: 60 V;

Details

LM555CM

Intersil

Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;

Details

ULN2803A

Onsemi

NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified;

Details

OPA2227UA

Texas Instruments

OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.

Details

2N2222A

SPC TECHNOLOGY/ MULTICOMP

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

2N2222A

North American Philips Discrete Products Div

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

BAV99

NXP Semiconductors

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148

Texas Instruments

1N4148 by Texas Instruments is a rectifier diode with max reverse recovery time of 0.004 us and max forward voltage of 1V. Ideal for applications requiring low reverse current such as signal demodulation circuits. Operates at max temp of 200°C, making it suitable for high-temperature environments.

Details

1N4148

Shandong Yiguang Electronic Joint Stock

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

DS18B20Z

Dallas Semiconductor

TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Housing: PLASTIC; Maximum Accuracy (Cel): 0.50;

Details

LM2675M-ADJ/NOPB

Texas Instruments

LM2675M-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with 1A output current, 37V max output voltage, and 260kHz max switching frequency. Ideal for automotive applications due to its -40°C to 125°C operating temperature range and compact small outline package design.

Details

453-00041C Technical Details

TYPE	DESCRIPTION
Maximum Time At Peak Reflow Temperature (s):	30
Telecom IC Type:	TELECOM CIRCUIT
Peak Reflow Temperature (C):	260

Category Top Products

NEO-M9N-00B

U-blox Ag

NEO-M9N-00B by U-blox Ag is a GNSS Module with 24 terminals, operating at -40 to 85°C. It has a data rate of 12 Mbps and operates at 3V supply voltage. This surface-mount module in rectangular shape is ideal for telecom applications requiring precise positioning.

450-0177R

Ls Research

TELECOM CIRCUIT;

CC2564BRVMT

Texas Instruments

Texas Instruments CC2564BRVMT is a 76-terminal telecom IC with a 3.6V supply voltage, operating b/w -40 to 85°C. It features matte tin finish, quad terminal position, and chip carrier package style for industrial applications requiring thin profile and surface mount compatibility.

EVA-M8Q-0

U-blox Ag

EVA-M8Q-0 by U-blox Ag is a telecom IC with 43 terminals, operating at -40 to 85°C. It has a compact square package, 1.16mm height, and requires 3.3V supply voltage. Ideal for industrial applications requiring precise positioning and navigation systems in small form factors.

A2235-H

Lantronix

The Lantronix A2235-H is an industrial-grade telecom circuit IC with a nominal voltage of 3.3V. It operates b/w -40°C to 85°C, making it suitable for harsh environments. Packaged in a rectangular microelectronic assembly, it is ideal for telecom interface applications.

MAX24287ETK2T

Microsemi

SUPPORT CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 68; Package Code: HVQCCN; Package Shape: SQUARE;

WT32I-A-AI61IAP

Silicon Labs

Other Telecom ICs;

SI4463-C2A-GMR

Silicon Labs

TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Peak Reflow Temperature (C): NOT SPECIFIED;

BLE112-A-V1

Silicon Labs

BLE112-A-V1 by Silicon Labs is a surface mount telecom IC with 31 terminals. It operates in industrial temperature range (-40 to 85°C) and has a compact package style (12.05mm x 18.1mm). Ideal for applications requiring low-power wireless communication.

ADRV9026BBCZ

Analog Devices

Analog Devices ADRV9026BBCZ is a telecom IC with 4 functions, operating at -40 to 110°C. It features a grid array package with 289 terminals and low profile design. Ideal for industrial applications requiring a nominal voltage of 1V and terminal pitch of 0.8mm.

NRF51822-QFAB-T

Nordic Semiconductor Asa

NRF51822-QFAB-T by Nordic Semiconductor Asa is a 48-terminal telecom IC with 1.8V supply voltage, -25 to 75°C operating range, and 0.4mm terminal pitch. It is used in telecom circuits due to its square chip carrier package style and quad terminal position, suitable for surface mount applications.

SPSGRFC-868

STMicroelectronics

TELECOM CIRCUIT; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Peak Reflow Temperature (C): NOT SPECIFIED;

XB3-24Z8CM

Digi International

The Digi International XB3-24Z8CM is a surface mount telecom IC with 34 terminals. It operates in industrial temperature range (-40 to 85°C) and has a rectangular package shape (13x19mm). Ideal for telecom circuits, this IC is designed for various applications requiring reliable performance in harsh environments.

NRF51822-CDAB-R

Nordic Semiconductor Asa

NRF51822-CDAB-R by Nordic Semiconductor Asa is a telecom IC with 56 terminals in a rectangular package. It operates b/w -25°C to 75°C, with a nominal voltage of 1.8V. The package style is grid array, very thin profile, fine pitch, making it suitable for various telecom circuit applications.

MIA-M10C-00B

U-blox Ag

GNSS Module;

2615011136000

Wuerth Elektronik & Kg

TELECOM CIRCUIT;

JODY-W263-00B

U-blox Ag

TELECOM CIRCUIT;

USB3740B-AI9TR

Standard Microsystems

USB3740B-AI9TR by Standard Microsystems is a telecom IC with 10 terminals, operating b/w -40 to 85°C. It has a thin profile chip carrier package style, suitable for industrial applications at 5V supply voltage. With surface mount and quad terminal position, it's ideal for compact telecom circuit designs.

NEO-M8P-0

U-blox Ag

TELECOM CIRCUIT; Moisture Sensitivity Level (MSL): 4;

BMD-340-A-R-00

U-blox Ag

BMD-340-A-R-00 by U-blox Ag is a surface mount telecom interface IC with 1 function. It has a rectangular package shape, 68 terminals, and a max seated height of 1.9 mm. With a data rate of 2 Mbps, it is suitable for industrial applications requiring reliable communication at temperatures ranging from -40 to 85 °C.