Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

B6P-VH(LF)(SN)

Manufacturer

J S T Mfg
Manufacturer's Part Number

B6P-VH(LF)(SN)
Description

BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1500VAC; No. of Connectors: ONE; Terminal Length: .146 inch;
Datasheet

Datasheet

Not In Stock

Popular Products

LM555CM

National Semiconductor

PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;

Details

SMBJ18CA

Jiangsu Jiejie Microelectronics

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LP2950CDT-3.3G

Onsemi

LP2950CDT-3.3G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It has a small outline package style, operates at temperatures ranging from -40 to 125 °C, and is suitable for applications requiring low dropout voltage and precise voltage regulation in electronic circuits.

Details

2N7002

Bytesonic Electronics

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Position: DUAL; Minimum Operating Temperature: -55 Cel;

Details

NE555DR

Texas Instruments

NE555DR by Texas Instruments is an Analog Waveform Generation IC with 8 terminals, operating voltage of 5V, and power supplies ranging from 5-15V. It is a versatile component for pulse generation applications due to its small outline package and commercial temperature grade suitability.

Details

BAV99

Itt Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SMBJ18CA

Fagor Electronica S Coop

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

C1210C104K5RACTU

KEMET Corporation

KEMET C1210C104K5RACTU is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics and ±10% tolerance, suitable for surface mount applications in a wide temperature range from -55°C to 125°C. Its compact rectangular package makes it ideal for various electronic devices.

Details

CRG0805F10K

TE Connectivity

TE Connectivity's CRG0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in various electronic circuits due to its compact size and high temperature rating.

Details

FDV304P

Onsemi

The Onsemi FDV304P is a P-CHANNEL FET with 25V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max Drain Current of 0.46A and an Operating Temperature range of -55 to 150 °C. The transistor comes in a PLASTIC/EPOXY package with GULL WING terminals, suitable for surface mount configurations.

Details

LM555CM

Harris Semiconductor

Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;

Details

LM358M

Onsemi

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

Details

LL4148

Weitronic Enterprise

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

RC0603FR-071KL

Yageo

Yageo's RC0603FR-071KL is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in electronics, it operates b/w -55 to 155 °C with a temperature coefficient of 100 ppm/°C.

Details

SS14

Sensitron Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM107H

Advanced Micro Devices

OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Bias Current (IIB) @25C: .075 uA;

Details

LM7805CT

Silicon Group

Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Package Body Material: PLASTIC/EPOXY; Maximum Load Regulation: .05 %;

Details

2N2222A

Tt Electronics Plc

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;

Details

2N2222A

Forward International Electronics

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .6 A;

Details

M39029/56-351

Amphenol

CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Additional Features: STANDARD: MIL-DTL-38999; Contact Gender: FEMALE; MIL-Connector Accessory Name: CONTACT; Associated Military - Specifications: MIL-DTL-38999;

Details

B6P-VH(LF)(SN) Technical Details

TYPE	DESCRIPTION
PCB Contact Pattern:	RECTANGULAR
Mating Contact Finish:	TIN OVER COPPER
Mating Info.:	MULTIPAL MATING PARTS AVAILBLE
IEC Conformity:	NO
MIL Conformity:	NO
No. of Rows Loaded:	1
Termination Type:	SOLDER
Maximum Operating Temperature (Cel):	85
Body Length:	.933 inch
Contact Gender:	MALE
Connector Type:	BOARD CONNECTOR
Contact Material:	BRASS
Mounting Option-1:	LOCKING
Contact Resistance:	20 mohm
Insulation Resistance:	1000000000 ohm
UL Flammability Code:	94V-0
Mounting Style:	STRAIGHT
Mixed Contacts:	NO
Polarization Key:	POLARIZED HOUSING
Contact Style:	SQ PIN-SKT
Filter Feature:	NO
No. of PCB Rows:	1
Mounting Type:	BOARD
Body Depth:	.429 inch
Minimum Operating Temperature:	-25 Cel
Total No. of Contacts:	6
Body Width:	.335 inch
Dielectric Withstanding Voltage (V):	1500VAC
Terminal Pitch (mm):	3.96
Terminal Length:	.146 inch
Termination Contact Finish:	Tin (Sn) over Copper (Cu)
Rated Current - Signal:	10 A
No. of Connectors:	ONE
Insulator Material:	POLYAMIDE66
Insulator Color:	WHITE
Reference Standard:	CSA;TUV;UL
Option:	GENERAL PURPOSE
Contact Pattern:	RECTANGULAR
Mating Contact Pitch (inch):	0.156
DIN Conformance:	NO

Category Top Products

796136-1

TE Connectivity

TE Connectivity 796136-1 is a PCB connector with Liquid Crystal Polymer insulator. It has 2 contacts, rated at 7A for signal current. With right-angle mounting style and compression contact, it's ideal for applications requiring a compact design and high operating temperatures up to 100°C.

DF11-16DS-2C(20)

Hirose Electric

BOARD CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;

17211102101

Harting Electronics & Kg

17211102101 by Harting Electronics & Kg is a BOARD CONNECTOR with 110 contacts, GOLD OVER NICKEL finish, and GLASS FILLED POLYETHYLENE insulator. It has a Mating Contact Pitch of 0.079", operates b/w -55 to 125 °C, and offers durability up to 250 cycles. Ideal for applications requiring high insulation resistance and reliable signal current of 1A in commercial settings.

1658621-1

Tyco Electronics Amp

BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; UL Flammability Code: 94V-0; Mating Contact Finish: GOLD (15) OVER NICKEL (50)/GOLD FLASH (15) OVER PALLADIUM NICKEL (15); Filter Feature: NO;

502352-0200

Molex

The Molex 502352-0200 is a board connector with 2 contacts, featuring a mating contact pitch of 0.079" and insulation resistance of 1 Gohm. Ideal for commercial applications, it has a max operating temperature of 105°C and termination type of surface mount.

DF40C-60DP-0.4V(51)

Hirose Electric

DF40C-60DP-0.4V(51) by Hirose Electric is a 2-row, 60-contact board stacking connector with gold over nickel finish. It features liquid crystal polymer insulator, 100VAC dielectric voltage, and 0.3A signal current rating. Ideal for PCB applications requiring durability, reliability, and polarization key for secure connections.

22-03-5035

Molex

The Molex 22-03-5035 is a board connector with a mating contact pitch of 0.098", insulation resistance of 1Gohm, and dielectric voltage rating of 1000VAC. It is used in applications requiring a durable, polarized housing with male contacts for signal currents up to 3A. The connector has UL94V-0 flammability rating and operates b/w -40°C to 105°C, making it suitable for commercial reliability standards.

22-27-2021

Molex

Molex 22-27-2021 is a board connector with 0.1" pitch, suitable for commercial applications. Featuring brass contacts with matte tin finish, it offers high durability with 25 cycles and insulation resistance of 1000000000 ohm. With a temperature range of 0-75°C, this white connector has a total of 2 contacts and is UL and CSA certified.

B2P-VH(LF)(SN)

J S T Mfg

B2P-VH(LF)(SN) by J S T Mfg is a 2-contact BOARD CONNECTOR with 0.156" pitch, suitable for -25 to 85 °C operation. Featuring POLYAMIDE66 insulator, it offers 1500VAC dielectric strength and 10A signal current capacity. Ideal for PCB applications requiring high insulation resistance and UL94V-0 flammability rating.

TSW-103-07-T-D

Samtec

Samtec's TSW-103-07-T-D is a 2-row, 6-contact board connector with a mating contact pitch of 0.1". Featuring matte tin finish and phosphor bronze contacts, it has a body width, depth, and terminal length of 0.1 inch each. Ideal for PCB applications requiring reliable male connectors with solder termination in a straight mounting style.

35572-0300

Molex

Molex 35572-0300 is a board connector with 3 contacts, 0.098" pitch, and 1000VAC voltage rating. Ideal for commercial applications, it features tin finish contacts, operates b/w -40 to 105°C temperatures, and has UL94V-0 flammability rating.

SHR-07V-S-B

J S T Mfg

SHR-07V-S-B by J S T Mfg is a 1-row loaded board connector with 7 contacts. It has a UL flammability code of 94V-0 and uses crimp termination. This connector is commonly used in cable mounting applications.

DT04-2P-E008

TE Connectivity

TE Connectivity's DT04-2P-E008 is a 2.251" x 0.675" x 0.67" board connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and 125°C. It features UL 94V-0 flammability code, polarized key, and supports up to 13A signal current. Ideal for cable mounting applications requiring a male contact gender with strain relief option.

B2B-ZR-SM4-TFT(LF)(SN)

J S T Mfg

B2B-ZR-SM4-TFT(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 2 contacts, BRASS material, and TIN finish. It has a terminal pitch of 1.5mm and is used for surface mount applications in headers & edge type connectors.

74441-0010

Molex

Molex 74441-0010 is a board connector with 20 contacts, 0.031" mating pitch, and 0.433" body length. Ideal for commercial applications, it has a matte tin finish, operates b/w -40 to 85°C, and features a glass-filled polyethylene insulator.

66506-353LF

Amphenol Communications Solutions

Amphenol's 66506-353LF is a 2-row, 34-contact board connector with UL94V-0 flammability rating. Featuring 2.54mm terminal pitch and solder termination, it is ideal for straight mounting applications in headers & edge type connectors.

DF40C-80DP-0.4V(51)

Hirose Electric

DF40C-80DP-0.4V(51) by Hirose Electric is a 2-row, 80-contact board stacking connector with gold-plated phosphor bronze contacts. Featuring a mating contact pitch of 0.016", it offers high insulation resistance of 50M ohm and withstands up to 100VAC. Ideal for PCB applications requiring reliable signal transmission in commercial environments at temperatures ranging from -35°C to 85°C.

02011602101

Harting Electronics & Kg

02011602101 by Harting Electronics & Kg is a 160-contact board euro connector with 0.1" pitch, suitable for headers & edge type connectors. Featuring gold over nickel termination finish, it has an insulation resistance of 1T ohm and operates b/w -65 to 125°C. Ideal for commercial applications requiring high durability and reliability.

B2B-XH-A-E(LF)(SN)

J S T Mfg

B2B-XH-A-E(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 0.098" mating contact pitch, 1000000000 ohm insulation resistance, and 1000VAC dielectric voltage. Ideal for commercial applications, this connector has a rated current of 3A and operates b/w -25 to 85 °C temperatures.

70553-0002

Molex

Molex 70553-0002 is a board connector with 0.1" pitch, suitable for commercial applications. Features include matte tin over nickel finish, glass-filled polyester insulator, and operating temperature range of -40 to 105°C. Ideal for right-angle mounting on PCBs with rectangular contact pattern.