Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

B04B-PASK(LF)(SN)

Manufacturer

J S T Mfg
Manufacturer's Part Number

B04B-PASK(LF)(SN)
Description

BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 800VAC; No. of Connectors: ONE; IEC Conformity: NO;
Datasheet

Datasheet

Not In Stock

Popular Products

EU2B-YS3103F

Idec

ROTARY SWITCH;

Details

1N4148

Cheng-yi Electronic

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

LM358MX

Texas Instruments

LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.

Details

LAN8720AI-CP-TR

Microchip Technology

LAN8720AI-CP-TR by Microchip is an Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85 °C. It features a 3.3 V supply voltage, 54 mA supply current, and TS 16949 screening level. Ideal for network interfaces in industrial applications due to its compact square package and low profile design.

Details

2N2222A

STMicroelectronics

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;

Details

SMBJ18CA

Secos

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LL4148

Surge Components

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

L78L05ABZ-AP

STMicroelectronics

L78L05ABZ-AP by STMicroelectronics is a BIPOLAR fixed positive single output standard regulator with an operating temperature range of -40 to 125°C. It has a nominal output voltage of 5V, max load regulation of 0.06%, and can handle a max output current of 0.07A. Ideal for applications requiring stable voltage regulation in various electronic devices.

Details

261

New England Microwave

Other Interface ICs; No. of Terminals: 14; Package Equivalence Code: FL14(UNSPEC); Power Supplies (V): +-5,-15; Package Body Material: PLASTIC/EPOXY; Surface Mount: YES;

Details

M24308/2-1F

Cristek Interconnects

D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Rows Loaded: 2; Shell Size: 1/E; Filter Feature: NO;

Details

BSS138

Panjit International

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;

Details

MBRA340T3G

Onsemi

MBRA340T3G by Onsemi is a Schottky rectifier diode with 40V reverse test voltage and 3A max output current. Ideal for power applications, it operates b/w -55 to 150°C, features matte tin terminal finish, and comes in a small outline package.

Details

LM317T

Fairchild Semiconductor

ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Output Current-1: 1.5 A; No. of Outputs: 1; Qualification Status: Not Qualified;

Details

SZNUP2105LT1G

Onsemi

SZNUP2105LT1G by Onsemi is a Transient Suppression Device with 2 elements in a common anode configuration. It has a max non-repetitive peak reverse power dissipation of 350W and breakdown voltage of 29.1V. Ideal for applications requiring bidirectional polarity protection, such as automotive electronics and industrial equipment due to its AEC-Q101 compliance and high clamping voltage of 44V.

Details

1N4148

Grande Electronics

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

SMBJ18CA

Semitron

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LL4148GS08

Temic Semiconductors

LL4148GS08 by Temic Semiconductors is a glass diode with a max reverse recovery time of 0.008 us and max forward voltage of 1 V. It is a rectifier diode with a max output current of 0.15 A, ideal for applications requiring fast switching speeds and low power dissipation in electronic circuits.

Details

SMBJ18CA

Uniohm

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM358N

Motorola

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

SS14

Sangdest Microelectronics (Nanjing)

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

B04B-PASK(LF)(SN) Technical Details

TYPE	DESCRIPTION
PCB Contact Pattern:	RECTANGULAR
Mating Contact Finish:	NOT SPECIFIED
Contact Design:	PREASSEM CONN
Mating Info.:	MULTIPLE MATING PARTS AVAILABLE
IEC Conformity:	NO
MIL Conformity:	NO
No. of Rows Loaded:	1
Termination Type:	SOLDER
Maximum Operating Temperature (Cel):	85
Body Length:	.394 inch
Contact Gender:	MALE
Connector Type:	BOARD CONNECTOR
Contact Material:	COPPER ALLOY
Mounting Option-1:	LOCKING
Contact Resistance:	20 mohm
Insulation Resistance:	1000000000 ohm
UL Flammability Code:	94V-0
Mounting Style:	STRAIGHT
Mixed Contacts:	NO
Contact Style:	SQ PIN-SKT
Filter Feature:	NO
No. of PCB Rows:	1
Mounting Type:	BOARD
Body Depth:	.303 inch
Minimum Operating Temperature:	-25 Cel
Total No. of Contacts:	4
Body Width:	.209 inch
Dielectric Withstanding Voltage (V):	800VAC
Terminal Pitch (mm):	2
Terminal Length:	.118 inch
Rated Current - Signal:	3 A
No. of Connectors:	ONE
Insulator Material:	GLASS FILLED POLYBUTYLENE TEREPHTHALATE
Additional Features:	SHROUDED, TOP ENTRY
Insulator Color:	WHITE
Reference Standard:	UL
Option:	GENERAL PURPOSE
Contact Pattern:	RECTANGULAR
Mating Contact Pitch (inch):	0.079
Board Mounting Option:	PEG
DIN Conformance:	NO

Category Top Products

52465-1071

Molex

52465-1071 by Molex is a 2-row BOARD CONNECTOR with 0.031" pitch, 10 contacts, and 0.5A signal rating. It features LIQUID CRYSTAL POLYMER insulator, TIN finish, and 500VAC dielectric voltage. Ideal for commercial applications requiring STRAIGHT mounting and SURFACE MOUNT termination.

1-480699-0

AMPHENOL ICC

BOARD CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Additional Features: ONE PIECE HOUSING; Minimum Operating Temperature: -55 Cel; Body or Shell Style: PLUG;

1-2199230-4

TE Connectivity

TE Connectivity 1-2199230-4, a card edge connector with 67 contacts, features 0.5A signal current rating. With POLYETHYLENE insulator and UL94V-0 flammability code, it operates b/w -40 to 80°C. Ideal for board mounting applications with right-angle mounting style.

PHR-4-L

J S T Mfg

PHR-4-L by J S T Mfg is a 4-contact BOARD CONNECTOR with 0.079" pitch, POLYAMIDE66 insulator, and 800VAC dielectric voltage. It has a 0.386" body length, -25 to 85 °C operating temp range, and UL94V-0 flammability rating. Ideal for commercial applications requiring reliable signal transmission with 2A current at up to 24 AWG wire size.

B3B-XH-A-GU

J S T Mfg

BOARD CONNECTOR; Manufacturer Series: XH;

B4B-XH-A-GU

J S T Mfg

B4B-XH-A-GU by J S T Mfg is a BOARD CONNECTOR with 0.098" pitch, 1000000000 ohm insulation resistance, and 3A signal current rating. Ideal for applications requiring POLARIZED HOUSING, it features POLYAMIDE66 insulator material and operates b/w -25 to 85 °C.

B3B-XH-A-BK(LF)(SN)

J S T Mfg

B3B-XH-A-BK(LF)(SN) by J S T Mfg is a 3A BOARD CONNECTOR with 0.098" pitch, POLYAMIDE66 insulator, and 1000VAC dielectric voltage. Ideal for applications requiring a polarized housing, such as PCB connections in electronics with operating temperatures from -25 to 85°C.

51021-0300

Molex

The Molex 51021-0300 is a board connector with 3 contacts, 0.049" pitch, and insulation resistance of 100M ohm. It has a temperature range of -40 to 85°C, ideal for commercial applications requiring reliable female crimp connectors in cable assemblies with locking mounting option.

5-146281-2

TE Connectivity

TE Connectivity 5-146281-2 is a board connector with mating contact pitch of 0.1". Featuring matte tin finish, it has insulation resistance of 5000000000 ohm and operates b/w -65 to 105 °C. Ideal for commercial applications, this male connector has a rated current of 3A and UL flammability rating of 94V-0.

XHP-7

J S T Mfg

XHP-7 by J S T Mfg is a 7-contact BOARD CONNECTOR with 94V-0 UL Flammability Code. It features FEMALE contacts, CABLE mounting, and CRIMP termination. Ideal for applications requiring reliable connection in headers & edge type connectors.

SM04B-GHS-TB(LF)(SN)

J S T Mfg

SM04B-GHS-TB(LF)(SN) by J S T Mfg is a 4-contact board connector with 0.049" pitch, POLYAMIDE insulator, and 500VAC dielectric voltage. Ideal for PCB applications requiring male contacts, right-angle mounting, and surface mount termination.

SHR-14V-S-B

J S T Mfg

SHR-14V-S-B by J S T Mfg is a 14-contact BOARD CONNECTOR with UL 94V-0 flammability rating. It features FEMALE contacts for CABLE mounting and CRIMP termination. Ideal for applications requiring secure and reliable electrical connections in various electronic devices.

M20-9990245

Harwin Plc

M20-9990245 by Harwin PLC is a board connector with 0.1" mating contact pitch, 3A signal current rating, and 750VAC dielectric voltage. Ideal for commercial applications, it features gold-plated contacts, polyamide insulator, and operates b/w -40°C to 105°C temperature range.

SSW-110-01-G-D

Samtec

SSW-110-01-G-D by Samtec is a 2-row, 20-contact board connector with a mating contact pitch of 0.1". It features gold over nickel termination finish and liquid crystal polymer insulator material. Ideal for commercial applications requiring reliable socket connections on PCBs with a rectangular contact pattern.

B4P-VH(LF)(SN)

J S T Mfg

B4P-VH(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 0.156" pitch, 1500VAC voltage withstand, and 10A signal current rating. Ideal for PCB applications requiring POLARIZED HOUSING, it features BRASS contacts with TIN finish and WHITE insulator color.

DTM04-12PA

TE Connectivity

TE Connectivity's DTM04-12PA is a 2-row board connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and 7.5A signal current. With dimensions of 1.72" x 0.796" x 1.575", it operates b/w -55°C to 125°C, suitable for cable mounting applications requiring a polarized, UL-certified connector with strain relief option.

52559-2052

Molex

Molex 52559-2052 FFC/FPC connector with 20 contacts, 0.020" pitch, and 39u plating thickness. Ideal for PCB applications requiring a mating contact pitch of 2.794mm, operating temperature range from -40 to 85°C, and UL94V-0 flammability rating.

B8B-PH-SM4-TB(LF)(SN)

J S T Mfg

B8B-PH-SM4-TB(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 8 contacts, made of COPPER ALLOY. It features Tin/Copper (Sn/Cu) termination finish and has a terminal pitch of 2mm. Ideal for surface mount applications in headers & edge type connectors.

89110-0101

3m Electronic Products Division

89110-0101 by 3M Electronic Products Division is a board connector with a mating contact pitch of 0.1", insulation resistance of 1G ohm, and dielectric voltage of 1400VAC. It has a body length of 0.68", suitable for applications requiring a reliable socket connector with IDC termination and gold-nickel finish for signal currents up to 1.25A in commercial settings.

TSW-102-07-F-S

Samtec

TSW-102-07-F-S by Samtec is a 2-contact board connector with 0.1" pitch, ideal for commercial applications. It features phosphor bronze contacts with gold flash finish, operating temperature range of -55 to 125°C, and UL94V-0 flammability rating. Suitable for PCB mounting with solder termination, this header connector offers reliable performance in various electronic devices.