Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

TLE6240GPAUMA1

Manufacturer

Infineon Technologies
Manufacturer's Part Number

TLE6240GPAUMA1
Description

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 36; Package Code: HSSOP; Package Shape: RECTANGULAR; Maximum Supply Voltage: 5.5 V;
Datasheet

Datasheet

Not In Stock

Popular Products

MMBF170LT1G

Onsemi

MMBF170LT1G by Onsemi is a N-CHANNEL FET with 60V DS Breakdown Voltage and 0.5A Drain Current. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with a max power dissipation of 0.225W. This small outline transistor has a temperature range from -55 to 150 °C.

Details

LM358N

Philips Semiconductors

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

SMBJ18CA

Zowie Technology

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148

Compensated Devices

RECTIFIER DIODE; Terminal Position: UPPER; Terminal Form: NO LEAD; No. of Terminals: 1; Surface Mount: YES; Package Shape: SQUARE;

Details

LM107H

General Electric Solid State

OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Minimum Voltage Gain: 25000;

Details

SMBJ18CA

Telefunken Microelectronics

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148W-T

Micro Commercial Components

1N4148W-T by Micro Commercial Components is a single rectifier diode with a max reverse recovery time of 0.004 us. It operates b/w -55 to 150 °C and has a max output current of 0.15 A. Ideal for applications requiring fast switching speeds in small outline packages.

Details

OPA2227UA

Texas Instruments

OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.

Details

MBRS140T3G

Onsemi

MBRS140T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.6V and max output current of 1A. It operates b/w -65°C to 125°C, making it suitable for various applications requiring high-speed switching and low power loss in a small outline package style. The diode's matte tin terminal finish and dual position terminals enhance its performance in surface mount configurations.

Details

2N7002

Infineon Technologies

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Transistor Element Material: SILICON; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;

Details

SMBJ18CA

Transpro Electronics

TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; JESD-609 Code: e0; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Breakdown Voltage: 21.1 V; Maximum Clamping Voltage: 29.2 V;

Details

RC0402JR-070RL

Yageo

Yageo's RC0402JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. It features METAL GLAZE/THICK FILM tech, WRAPAROUND terminals, and 0.0625 W power dissipation. Ideal for jumper applications in electronics requiring compact surface mount components.

Details

LM317T/NOPB

National Semiconductor

ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; JESD-609 Code: e3; Package Shape: RECTANGULAR;

Details

2N7002

Kec

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;

Details

BAV99

Diotec Semiconductor Ag

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM7805CT

Silicon Group

Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Package Body Material: PLASTIC/EPOXY; Maximum Load Regulation: .05 %;

Details

BSS138

Vishay Semiconductors

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Style (Meter): SMALL OUTLINE; Package Shape: RECTANGULAR; Transistor Application: SWITCHING;

Details

BAV99

Jgd Semiconductors

RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 150 Cel;

Details

LM107H/883C

General Electric Solid State

OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Wideband: NO;

Details

BAV99

Sensitron Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

TLE6240GPAUMA1 Technical Details

TYPE	DESCRIPTION
Minimum Supply Voltage:	4.5 V
Package Body Material:	PLASTIC/EPOXY
Nominal Supply Voltage:	5 V
Maximum Seated Height:	3.5 mm
Surface Mount:	YES
Terminal Finish:	TIN
No. of Terminals:	36
Terminal Position:	DUAL
Package Style (Meter):	SMALL OUTLINE, HEAT SINK/SLUG, SHRINK PITCH
JESD-30 Code:	R-PDSO-G36
Package Shape:	RECTANGULAR
Terminal Form:	GULL WING
Built-in Protections:	TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL
Package Code:	HSSOP
Interface IC Type:	BUFFER OR INVERTER BASED PERIPHERAL DRIVER
Width:	11 mm
Turn-off Time:	12 us
Moisture Sensitivity Level (MSL):	3
Maximum Supply Voltage:	5.5 V
Turn-on Time:	12 us
Nominal Output Peak Current Limit:	4.5 A
JESD-609 Code:	e3
No. of Functions:	2
Qualification:	Not Qualified
Output Current Flow Direction:	SINK
Length:	15.9 mm
Terminal Pitch:	.65 mm

Category Top Products

ITS4200SMEOHUMA1

Infineon Technologies

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 3; Terminal Finish: TIN;

ULN2003LVPWR

Texas Instruments

ULN2003LVPWR by Texas Instruments is a 7-bit peripheral driver with a nominal output peak current limit of 1A. It features built-in transient protections and operates b/w -40 to 85°C. Ideal for applications requiring inverted output polarity and sink current flow direction in a small outline, thin profile package.

L293D

STMicroelectronics

L293D by STMicroelectronics is a peripheral driver with 2 functions, operating at a max supply voltage of 36V. It features built-in transient and thermal protections, suitable for applications requiring true output polarity and standard input characteristics. With a nominal output peak current limit of 1.2A, this half bridge-based peripheral driver is ideal for various electronic projects.

BTS441RGNTMA1

Infineon Technologies

BTS441RGNTMA1 by Infineon Technologies is a peripheral driver with a max supply voltage of 43V and built-in protections for transient, over current, and over voltage. It has a nominal output peak current limit of 21A and is used as a buffer or inverter based peripheral driver in various applications requiring precise control of high currents.

LM3526M-H/NOPB

Texas Instruments

LM3526M-H/NOPB by Texas Instruments is a peripheral driver with 8 terminals, operating voltage range of 2.7V to 5.5V, and built-in protections for transient, over current, thermal, and under voltage. It has an output peak current limit of 1.2A and is suitable for automotive applications due to its temperature grade. The package style is small outline with gull wing terminal form and matte tin finish.

ULN2803A

Texas Instruments

ULN2803A by Texas Instruments is a peripheral driver with 8 functions. It has a max supply voltage of 3V and can operate in temperatures ranging from -40 to 85°C. This IC is commonly used as a buffer or inverter based peripheral driver for various applications.

XSN6507DGQR

Texas Instruments

XSN6507DGQR by Texas Instruments is a peripheral driver with a max supply voltage of 36V and nominal output peak current limit of 1.3A. It operates in temperatures ranging from -55°C to 125°C, making it suitable for various industrial applications requiring high-performance buffer or inverter-based interface ICs.

BTS50301EJAXUMA1

Infineon Technologies

BTS50301EJAXUMA1 by Infineon is a peripheral driver with 8 terminals, offering built-in protections for transient, over current, and over voltage. It operates at supply voltages ranging from 8V to 18V and has a nominal output peak current limit of 5A. Ideal for automotive applications due to AEC-Q100 screening level.

ULN2803

Motorola

Motorola's ULN2803 is an 8-bit bipolar peripheral driver with a max output current of 0.2A. Operating in industrial temperature range (-40 to 85°C), it features 18 terminals in a rectangular plastic/epoxy package, ideal for various applications requiring high-current switching capabilities.

ULN-2065B

Vishay Sprague

Vishay Sprague's ULN-2065B is a 16-terminal peripheral driver with 4 functions. It features open-collector output, transient protection, and operates b/w -20°C to 85°C. Ideal for applications requiring buffer or inverter-based interface ICs with sink current flow direction.

BTS712N1

Infineon Technologies

BTS712N1 by Infineon Technologies is a MOS peripheral driver with 20 terminals, offering built-in protections for transient, over current, and over voltage. It operates at supply voltages of 5-34 V and has a max output current of 1.7 A. Ideal for automotive applications due to AEC-Q100 screening level and small outline package style.

ULN2003D1

STMicroelectronics

STMicroelectronics ULN2003D1 is a 7-bit buffer/inverter peripheral driver with max supply voltage of 3V. It features open-collector output, transient protection, and sink current flow direction. Ideal for applications requiring small outline package, such as robotics and automation systems.

BSP75NT

Infineon Technologies

BSP75NT by Infineon Technologies is a small outline peripheral driver with built-in protections for transient, over current, and over voltage. It operates at a nominal voltage of 12V and has a max output peak current limit of 0.7A. Ideal for applications requiring buffer or inverter based interface ICs in compact designs.

FAN7390AMX1

Fairchild Semiconductor

HALF BRIDGE BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR;

BTS3410GXUMA1

Infineon Technologies

BTS3410GXUMA1 by Infineon Technologies is a MOS peripheral driver with 2 functions, built-in protections for transient, over current, and over voltage. It has 8 terminals in a small outline package style suitable for applications requiring a nominal voltage of 12V and peak current limit of 7.5A.

ISO8200BQ

STMicroelectronics

ISO8200BQ by STMicroelectronics is a peripheral driver with 32 terminals, operating voltage range of 2.75V to 36V, and built-in protections for transient, over current, and over voltage. It has a max output current of 1.3A and is suitable for automotive applications due to its temperature grade and compact size.

BTS6163D

Infineon Technologies

BTS6163D by Infineon is a peripheral driver with 4 terminals, suitable for applications requiring a supply voltage of 5.5-24 V. It offers built-in protections against transient, over current, and over voltage events. With a max supply voltage of 62 V and turn-on time of 300 us, it is ideal for automotive systems meeting AEC-Q100 standards.

IRS2153DPBF

International Rectifier

HALF BRIDGE BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

VNQ5160K-E

STMicroelectronics

STMicroelectronics' VNQ5160K-E is a 4-function peripheral driver with built-in protections. It operates on power supplies ranging from 8V to 36V, offering a turn-on/off time of 15us. This small outline package is ideal for applications requiring source output current flow direction and interface IC type as buffer or inverter based peripheral driver.

TPIC6595DWR

Texas Instruments

TPIC6595DWR by Texas Instruments is a SIPO-based peripheral driver with 8 channels, each capable of sinking up to 0.5A current. It operates b/w -40°C to 125°C and has built-in transient protection. Ideal for automotive applications due to its small outline package and Schmitt trigger input characteristics.