IRLML2803GTRPBF by Infineon Technologies

Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

All prices are in USD

Bulk

QTY	Unit Price	Ext Price
905	Request Pricing	-

IRLML2803GTRPBF

Manufacturer

Infineon Technologies
Manufacturer's Part Number

IRLML2803GTRPBF
Description

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .54 W; Qualification: Not Qualified; JESD-609 Code: e3;
Datasheet

Datasheet

905 In Stock

Popular Products

1N4148

Shanghai Lunsure Electronic Technology

RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Config: SINGLE;

Details

OPA2227UA

Texas Instruments

OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.

Details

LM358AN

Signetics

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

M39029/58-360

Positronic Industries

CONNECTOR ACCESSORY; MIL-Connector Accessory Name: CONTACT; DIN Conformity: NO; National Stock Number (NSN): 5999004733551; Mating Contacts: M39029/56-348, M39029/57-354; Contact Type: CRIMP REAR RELEASE;

Details

1N4148

General Semiconductor

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

LM107H/883

Texas Instruments

LM107H/883 by Texas Instruments is a MIL-STD-883 compliant operational amplifier with 3000uV max input offset voltage, 80dB common mode reject ratio, and 250kHz unity gain bandwidth. Ideal for military applications due to its -55 to 125 °C operating temperature range and robust metal package body material.

Details

LM358DR2G

Onsemi

LM358DR2G by Onsemi is a dual operational amplifier with 7000uV max input offset voltage and 70dB nominal CMRR. Ideal for applications requiring low bias current such as sensor interfaces, signal conditioning circuits, and audio amplifiers. Package style: Small Outline, Technology: Bipolar, Unity Gain Bandwidth: 1000 kHz.

Details

1N4148WT

Tak Cheong Electronics Holdings

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BAV99

Philips Semiconductors

RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN; Maximum Reverse Recovery Time: .006 us;

Details

2N7002

Comchip Technology

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; Operating Mode: ENHANCEMENT MODE;

Details

ATMEGA328P-AU

Microchip Technology

ATMEGA328P-AU by Microchip: 8-bit RISC CPU, 20 MHz clock, 23 I/O lines. Ideal for industrial applications with SPI, TWI, USART connectivity and low power mode. Features include 2048 RAM bytes, 1024 EEPROM size, and 16384 ROM words.

Details

BSS123,215

Nexperia

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Moisture Sensitivity Level (MSL): 1; No. of Terminals: 3; Maximum Time At Peak Reflow Temperature (s): 30;

Details

1N4148WS

First Components International

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

DS18B20Z

Dallas Semiconductor

TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Housing: PLASTIC; Maximum Accuracy (Cel): 0.50;

Details

SMBJ18CA

Mde Semiconductor

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N2222A

Rectron

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;

Details

LM555CMX

Onsemi

PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;

Details

MBR0520L-T1

Won-top Electronics

MBR0520L-T1 by Won-top Electronics is a Schottky rectifier diode with 20V peak reverse voltage and 0.5A output current. It is a single-config, surface-mount diode in a small outline package, suitable for applications requiring high-speed switching and low forward voltage drop. Operating temperature range from -65°C to 125°C makes it ideal for various electronic circuits.

Details

BSS138

Zetex Plc

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Style (Meter): SMALL OUTLINE; Maximum Operating Temperature: 150 Cel;

Details

SS14

Panjit International

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

IRLML2803GTRPBF Technical Details

TYPE	DESCRIPTION
Package Body Material:	PLASTIC/EPOXY
Maximum Time At Peak Reflow Temperature (s):	30
Configuration:	SINGLE WITH BUILT-IN DIODE
Transistor Element Material:	SILICON
Field Effect Transistor Technology:	METAL-OXIDE SEMICONDUCTOR
Transistor Application:	SWITCHING
Maximum Drain Current (ID):	1.2 A
Sub-Category:	FET General Purpose Power
Surface Mount:	YES
Terminal Finish:	MATTE TIN
No. of Terminals:	3
Maximum Power Dissipation (Abs):	.54 W
Terminal Position:	DUAL
Package Style (Meter):	SMALL OUTLINE
JESD-30 Code:	R-PDSO-G3
No. of Elements:	1
Package Shape:	RECTANGULAR
Terminal Form:	GULL WING
Operating Mode:	ENHANCEMENT MODE
Maximum Operating Temperature:	150 Cel
Maximum Drain-Source On Resistance:	.25 ohm
Moisture Sensitivity Level (MSL):	1
JEDEC-95 Code:	TO-236AB
Polarity or Channel Type:	N-CHANNEL
JESD-609 Code:	e3
Minimum DS Breakdown Voltage:	30 V
Qualification:	Not Qualified
Additional Features:	HIGH RELIABILITY
Maximum Drain Current (Abs) (ID):	1.2 A
Peak Reflow Temperature (C):	260

Category Top Products

SI2302CDS-T1-E3

Vishay Intertechnology

Vishay Intertechnology's SI2302CDS-T1-E3 is a N-CHANNEL FET with 20V DS Breakdown Voltage and 2.6A Drain Current. Ideal for SWITCHING applications, it features a built-in DIODE, 0.057 ohm On Resistance, and operates in ENHANCEMENT MODE at up to 150°C.

ZVP2106ASTOB

Zetex Plc

ZVP2106ASTOB by Zetex Plc is a P-CHANNEL FET for SWITCHING applications. Features include 60V DS Breakdown Voltage, 0.28A ID, and 5Ω RDS(ON). Operating in ENHANCEMENT MODE, it has a max temp of 200°C.

BS170FTA

Diodes Incorporated

Diodes Inc. BS170FTA is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.15A ID, and 5 ohm RDS(on). Ideal for small signal applications in electronics due to its SINGLE configuration, ENHANCEMENT MODE operation, and SMALL OUTLINE package style.

LBSS138LT1G

Leshan Radio

LBSS138LT1G by Leshan Radio is a N-CHANNEL FET with 50V DS Breakdown Voltage, ideal for SWITCHING applications. It features 0.2A Drain Current, 3.5 ohm On Resistance, and operates in ENHANCEMENT MODE. With GULL WING terminals and PLASTIC/EPOXY body, it's designed for surface mount installation at temperatures up to 150°C.

BSS123L6327

Infineon Technologies

Infineon's BSS123L6327 is a N-CHANNEL FET with 100V DS Breakdown Voltage and 0.17A Drain Current. Ideal for small outline applications, it operates in Enhancement Mode with 6ohm On Resistance. With Matte Tin finish, it can withstand -55 to 150 °C temperatures.

IRF9310TRPBF-1

Infineon Technologies

Infineon's IRF9310TRPBF-1 is a P-channel FET with 30V breakdown voltage, 20A max drain current, and 0.0046 ohm on-resistance. Ideal for enhancement mode operation in applications requiring high power efficiency and compact design. Features gull wing terminals in a small outline package for surface mount assembly.

FDN358P

Onsemi

FDN358P by Onsemi is a P-CHANNEL FET with 30V DS breakdown voltage and 1.5A max drain current. Ideal for switching applications, it features a built-in diode, operates in enhancement mode, and has a 0.125 ohm max on-resistance. The small outline package with gull wing terminals can withstand up to 260°C peak reflow temperature.

DMP4047LFDE-7

Diodes Incorporated

DMP4047LFDE-7 by Diodes Inc. is a P-channel FET with 40V DS breakdown voltage, 6A max drain current, and 0.033 ohm max on resistance. Ideal for switching applications in automotive electronics due to AEC-Q101 compliance and 150°C operating temp.

2N7002K

Hy Electronic

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 1; Additional Features: ULTRA LOW RESISTANCE; Package Body Material: PLASTIC/EPOXY;

NTR4101PT1G

Onsemi

NTR4101PT1G by Onsemi is a P-CHANNEL FET for SWITCHING applications. It has a 20V DS Breakdown Voltage, 1.8A Drain Current, and 0.085 ohm On Resistance. With ENHANCEMENT MODE operation, it features GULL WING terminals in a RECTANGULAR package style for surface mount assembly at temperatures ranging from -55 to 150°C.

2N7002T

Temic Semiconductors

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Minimum DS Breakdown Voltage: 60 V; Package Style (Meter): SMALL OUTLINE; Terminal Form: GULL WING;

BSH103,215

Nexperia

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: .5 ohm; Peak Reflow Temperature (C): 260; No. of Terminals: 3;

BSS123

Motorola

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation Ambient: .55 W; Package Style (Meter): SMALL OUTLINE; Package Shape: RECTANGULAR;

2N7002K

Diodes Incorporated

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain Current (ID): .3 A; Maximum Feedback Capacitance (Crss): 5 pF; Terminal Form: GULL WING;

BSS138_NL

Fairchild Semiconductor

BSS138_NL by Fairchild Semiconductor is a N-CHANNEL FET with 50V DS breakdown voltage, 0.2A ID, and 6 ohm RDS. It is used for switching applications in enhancement mode with a max operating temperature of 150°C.

BSS138

Good-ark Electronics

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;

BSS314PEH6327XTSA1

Infineon Technologies

BSS314PEH6327XTSA1 by Infineon Technologies is a P-CHANNEL FET with 30V DS Breakdown Voltage and 1.5A ID. It features SINGLE configuration with built-in diode, 0.14 ohm RDS(on), and 11pF Crss. Ideal for applications requiring small signal amplification in compact electronic devices due to its ENHANCEMENT MODE operation and GULL WING terminals.

BSS123

Changzhou Galaxy Century Microelectronics

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Feedback Capacitance (Crss): 6.3 pF; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;

NX3008PBK,215

NXP Semiconductors

NX3008PBK,215 by NXP Semiconductors is a P-CHANNEL FET with max drain current of 0.23A and power dissipation of 0.42W. Ideal for applications requiring surface mount technology, it operates at up to 150°C making it suitable for various electronic devices.

2N7002L

Fairchild Semiconductor

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain Current (ID): .115 A; Terminal Position: DUAL; Maximum Drain-Source On Resistance: 7.5 ohm;