Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

SS461A

Manufacturer

Honeywell Sensing And Control
Manufacturer's Part Number

SS461A
Description

MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG VOLTAGE; Package Shape or Style: RECTANGULAR; Housing: PLASTIC;
Datasheet

Datasheet

Not In Stock

Popular Products

SMBJ18CA

Bourns

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

IRLML6402TRPBF

International Rectifier

P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Peak Reflow Temperature (C): 260; Package Style (Meter): SMALL OUTLINE;

Details

LM358DT

ROHM

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR;

Details

LL4148

Sinyork

RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V;

Details

MMBT2222ALT1G

Rochester Electronics

NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .3 W; Maximum Collector Current (IC): .6 A;

Details

RC0603JR-070RL

Yageo

Yageo's RC0603JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. Its metal glaze/thick film technology and 0.1 W power dissipation make it ideal for jumper applications in various electronic devices.

Details

BSS138LT3G

Onsemi

BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.

Details

BAV99-7-F

Diodes Incorporated

Diodes Inc. BAV99-7-F is a series-connected, center tap diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.004 us and can handle up to 0.3A output current. Ideal for rectification applications requiring fast switching and low reverse current requirements.

Details

LM555CMX

National Semiconductor

PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;

Details

2N2222A

M/a-com Technology Solutions

NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Terminal Position: BOTTOM; Package Style (Meter): CYLINDRICAL;

Details

2N7002,215

Nexperia

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): 30; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;

Details

LIS2DH12TR

STMicroelectronics

LIS2DH12TR by STMicroelectronics is a 3-axis accelerometer with digital voltage output. It operates b/w -40 to 85°C, with supply voltage range of 1.71-3.6V. Ideal for applications requiring precise motion sensing in compact spaces like wearables and IoT devices.

Details

BAV99

Bytesonic Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BAV99

Sprague Electric

RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1.3 V; Maximum Output Current: .1 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel;

Details

SMBJ18CA

Transpro Electronics

TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; JESD-609 Code: e0; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Breakdown Voltage: 21.1 V; Maximum Clamping Voltage: 29.2 V;

Details

BAV99

Hitano Enterprise

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BAV99

Bkc Semiconductors

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148

Renesas Electronics

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

CL31B104KBCNNNC

Samsung Electro-mechanics

Samsung Electro-mechanics CL31B104KBCNNNC is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It features X7R temperature characteristics, -55 to 125 °C operating range, and compact SMT package style. Ideal for applications requiring high reliability in compact electronic devices.

Details

USB2514BI-AEZG

Microchip Technology

USB2514BI-AEZG by Microchip is a BUS CONTROLLER IC with 36 terminals, operating at 3.3V, supporting I2C, SMBUS, and USB buses. It has a clock frequency of up to 24MHz and can withstand industrial temperatures from -40°C to 85°C. This chip carrier package is surface mountable and suitable for various applications requiring USB connectivity.

Details

SS461A Technical Details

TYPE	DESCRIPTION
Minimum Supply Voltage:	3.8 V
Minimum Range Of Magnetic Field:	21 mT
Package Body Material:	PLASTIC/EPOXY
Maximum Operating Current:	10 mA
Output Type:	ANALOG VOLTAGE
Maximum Output Current:	20 A
Sub-Category:	Other Sensors
Terminal Finish:	Tin/Silver/Copper (Sn/Ag/Cu)
No. of Terminals:	3
Termination Type:	SOLDER
Technology:	BIPOLAR
Input Mode:	BIPOLAR(LATCHED)
Maximum Operating Temperature:	160 Cel
Hysteresis:	3 mT
Other Names:	480-2003 480-2003-NDR
Output Polarity:	INVERTING
Maximum Supply Voltage:	30 V
Housing:	PLASTIC
JESD-609 Code:	e1
Minimum Operating Temperature:	-55 Cel
Mounting Feature:	THROUGH HOLE MOUNT
Body Width:	1.57 inch
Sensors or Transducers Type:	MAGNETIC FIELD SENSOR,HALL EFFECT
Package Equivalence Code:	SIP3,.03,50
Maximum Magnetic Field Range:	42 mT
Package Shape or Style:	RECTANGULAR
Output (V):	OPEN-COLLECTOR
Body Height:	2.99 mm
Body Length/Diameter:	4.06 mm
Power Supplies (V):	3.8/30

Category Top Products

TLE4941

Infineon Technologies

TLE4941 by Infineon is a magnetic field sensor with 4.5-16.5V power supply, 8.4mA max operating current, and -20mT min magnetic field range. It features a digital current output and is used in applications requiring Hall effect sensors for differential output interface via 2-wire interface mounting through hole solder termination.

MLX92211LSE-AAA-000-RE

Melexis N V

MLX92211LSE-AAA-000-RE by Melexis N V is a magnetic field sensor with 2.7V to 24V supply voltage range, -40°C to 150°C operating temperature, and 1.4mT magnetic field range. It features a current output interface, open-drain output type, and CMOS technology. Ideal for automotive applications requiring precise magnetic field detection in compact designs.

DRV5013AGQLPGMQ1

Texas Instruments

DRV5013AGQLPGMQ1 by Texas Instruments is a magnetic field sensor with hysteresis of 12 mT, operating temperature range from -40 to 125 °C, and output current up to 30 A. It is ideal for automotive applications requiring precise current output in a compact rectangular package.

SI7217-B-01-IVR

Silicon Labs

MAGNETIC FIELD SENSOR,HALL EFFECT; JESD-609 Code: e3; Terminal Finish: Matte Tin (Sn);

HAL815UT-A

Micronas Semiconductor Holding Ag

HAL815UT-A by Micronas is a 1.5" magnetic field sensor with 0.50% linearity and output range of 0.35-4.65V, ideal for applications requiring precise digital voltage output. With a max operating current of 10mA and -0.5mT to 0.5mT magnetic field range, it is commonly used in automotive and industrial systems for accurate sensing needs.

A1260LLHLX-T

Allegro MicroSystems

Allegro MicroSystems' A1260LLHLX-T is a magnetic field sensor with 3-24V power supply, -40 to 150°C operating temp, and 5mT hysteresis. Ideal for automotive applications due to AEC-Q100 screening level, open-drain output circuit, and BICMOS technology.

AH3582-SA-7

Diodes Incorporated

MAGNETIC FIELD SENSOR,HALL EFFECT; Terminal Finish: MATTE TIN; JESD-609 Code: e3;

A1454KLETR-2F-T

Allegro MicroSystems

Allegro MicroSystems' A1454KLETR-2F-T is a magnetic field sensor with 2.65V to 3.5V supply voltage range, -40°C to 125°C operating temperature, and digital voltage output. Ideal for applications requiring Hall effect sensors, this rectangular sensor has I2C interface and surface mounting feature.

DRV5055A1QDBZR

Texas Instruments

Texas Instruments' DRV5055A1QDBZR is a magnetic field sensor with a supply voltage range of 3-3.63V and operating temperature from -40 to 125°C. It features an output current range of -1-1mA, making it ideal for applications requiring precise analog current measurements in a compact surface-mount package.

TLE4998C3XALA1

Infineon Technologies

TLE4998C3XALA1 by Infineon: Magnetic field sensor with 5V max supply, 0.005mT hysteresis, and -40 to 150°C temp range. Ideal for hall effect sensing in automotive applications.

DRV5055A4ELPGMQ1

Texas Instruments

DRV5055A4ELPGMQ1 by Texas Instruments is a magnetic field sensor with a max supply voltage of 3.63V and an output range of -1-1mA. It is commonly used in automotive applications due to its AEC-Q100 screening level and through-hole mounting feature.

TSH190CXRFG

Taiwan Semiconductor

TSH190CXRFG by Taiwan Semiconductor is a magnetic field sensor with 30V max supply voltage, 10mT hysteresis, and -40 to 125°C operating temperature range. It is used for Hall effect sensing in applications requiring precise current output detection.

BMM150

Robert Bosch

BMM150 by Robert Bosch is a 3-axis magnetic field sensor with digital output. It operates b/w -40 to 85°C, with a magnetic field range of 1.2-2.5 mT. The sensor has I2C and SPI interfaces, suitable for surface mount applications in various industries.

MLX90392ELQ-AAA-010-RE

Melexis N V

MAGNETIC FIELD SENSOR,HALL EFFECT; Terminal Finish: NICKEL PALLADIUM GOLD; JESD-609 Code: e4;

A1102ELHLT-T

Allegro MicroSystems

Allegro MicroSystems' A1102ELHLT-T is a magnetic field sensor with 24V max supply voltage, -40 to 85°C operating temp range, and 5.5mT hysteresis. Ideal for automotive applications due to AEC-Q100 screening level, BICMOS technology, and compact rectangular package design.

SS494B-T3

Honeywell Sensing And Control

SS494B-T3 by Honeywell is a magnetic field sensor with 3 terminals, operating voltage of 4.5-10.5V, and sensitivity of 5mV/G. It features a transistor output circuit type and can detect magnetic fields ranging from -42mT to 42mT. Ideal for applications requiring precise analog current output in temperature-sensitive environments up to 150°C.

A1220ELHLT-T

Allegro MicroSystems

Allegro MicroSystems' A1220ELHLT-T is a magnetic field sensor with 3-24V supply, -40 to 85°C operating temp, and 4.5mT hysteresis. Ideal for current output applications like automotive systems, industrial controls, and consumer electronics due to its compact rectangular design and high sensitivity.

THS119

Toshiba

THS119 by Toshiba is a magnetic field sensor with a sensitivity of 0.14 mV/G and operates in temperatures ranging from -55°C to 125°C. Featuring a differential output circuit, it utilizes Hall effect technology for precise measurements. Ideal for applications requiring accurate magnetic field detection, such as automotive systems and industrial automation.

TMAG5170A2QDGKT

Texas Instruments

TMAG5170A2QDGKT by Texas Instruments is a magnetic field sensor with 8 terminals, voltage output range of 0.4-4.6V, and max supply voltage of 5.5V. It operates in temperatures from -40 to 150°C, making it ideal for automotive applications like position sensing and motor control in compact designs.

APS11060LUAA-0SL

Allegro MicroSystems

Magnetic Field Sensors;