Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

CSNR161

Manufacturer

Honeywell Sensing And Control
Manufacturer's Part Number

CSNR161
Description

Other Sensors/Transducers;
Datasheet

Datasheet

Not In Stock

Popular Products

BAV99

Siemens

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N2222A

Crimson Semiconductor

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

USB2514BI-AEZG

Microchip Technology

USB2514BI-AEZG by Microchip is a BUS CONTROLLER IC with 36 terminals, operating at 3.3V, supporting I2C, SMBUS, and USB buses. It has a clock frequency of up to 24MHz and can withstand industrial temperatures from -40°C to 85°C. This chip carrier package is surface mountable and suitable for various applications requiring USB connectivity.

Details

LM317T

National Semiconductor

ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Package Shape: RECTANGULAR; Minimum Input-Output Voltage Differential: 3 V;

Details

SMBJ18CA

Sangdest Microelectronics (Nanjing)

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LL4148

Changzhou Galaxy Century Microelectronics

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

1N4148

Vishay Intertechnology

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

SBAV99LT1G

Onsemi

SBAV99LT1G by Onsemi is a rectifier diode with a max repetitive peak reverse voltage of 100V. It has a small outline package style and a fast max reverse recovery time of 0.006 us. It is commonly used in applications requiring low power dissipation and high operating temperatures.

Details

FT232RL-REEL

FTDI

FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.

Details

1N4148

American Power Devices

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

2N7002

Micro Commercial Components

Small Signal Field-Effect Transistors; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .34 A; Package Style (Meter): SMALL OUTLINE;

Details

LL4148-GS08

Telefunken Microelectronics

RECTIFIER DIODE; Surface Mount: YES; JESD-609 Code: e0; No. of Elements: 1; Maximum Operating Temperature: 175 Cel; Maximum Non Repetitive Peak Forward Current: 2 A;

Details

LM555CN

Intersil

PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;

Details

BAV99

SPC TECHNOLOGY/ MULTICOMP

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

OHN3140U

Tt Electronics Plc

OHN3140U by Tt Electronics Plc is a magnetic field sensor with a max supply voltage of 24V and hysteresis of 2mT. It features an output range of 25mA and operates b/w -20 to 85°C. Ideal for applications requiring precise detection and measurement of magnetic fields in various industries.

Details

M24308/2-1F

Bel Fuse

D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1750VAC; No. of Connectors: ONE; Mixed Contacts: NO;

Details

ISO1050DUBR

Texas Instruments

ISO1050DUBR by Texas Instruments is a network interface IC with 8 terminals, operating from -55 to 105°C. It features a small outline package, nickel palladium gold finish, and gull wing terminal form. Ideal for telecom applications requiring a 5V supply voltage and peak reflow temperature of 260°C.

Details

LM358N

Taejin Technology

OPERATIONAL AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

261

Deltrol Controls

Other Relays;

Details

ULN2803A

Allegro MicroSystems

NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;

Details

Category Top Products

LIS3DHHTR

STMicroelectronics

LIS3DHHTR by STMicroelectronics is a ceramic accelerometer with a supply voltage range of 1.71V to 3.6V. It operates in temperatures ranging from -40°C to 85°C and has a digital voltage output. This sensor is commonly used for surface mount applications requiring precise motion detection.

SNDH-H3C-G04

Honeywell Sensing And Control

SPEED SENSOR; Termination Type: CONNECTOR; Maximum Operating Current: 14 mA; Maximum Output Current: 20 A; Housing: PLASTIC;

LA55-P/SP1

Lem International Sa

LA55-P/SP1 by Lem International Sa is a current sensor with 3 terminals. It operates b/w -40°C to 85°C, with supply voltage range of 11.4V to 15.75V. This rectangular sensor, made of plastic/epoxy, is ideal for through hole mounting applications.

ACS733KLATR-40AU-T

Allegro MicroSystems

Allegro MicroSystems' ACS733KLATR-40AU-T is a current sensor with 16 terminals, operating from -40 to 125°C. It offers an analog voltage output through open-drain configuration and supports a supply voltage range of 3.14V to 3.46V. This rectangular-shaped sensor, suitable for surface mounting, complies with AEC-Q100 standards for automotive applications.

AWM3200V

Honeywell Sensing And Control

MASS AIR FLOW SENSOR;

AD590JH

General Electric Solid State

Other Sensors/Transducers; No. of Terminals: 3; Package Equivalence Code: CAN3/4,.1; Package Body Material: METAL; JESD-609 Code: e0; Terminal Finish: Tin/Lead (Sn/Pb);

LM73CIMKX-1/NOPB

National Semiconductor

Other Sensors/Transducers; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Shape or Style: RECTANGULAR; JESD-609 Code: e4; Power Supplies (V): 3/5;

1230-015A-3L

Ic Sensors

Other Sensors/Transducers;

E3Z-T81

Omron

LINEAR POSITION SENSOR,PHOTOELECTRIC,RETROREFLECTIVE;

HO150-NP-0100

Lem International Sa

HO150-NP-0100 by Lem International Sa is a current sensor with 3.50% accuracy, voltage output range of -2.0-2.0V, and 13 terminals. It operates b/w -40 to 105°C, suitable for applications requiring precise current measurement in a wide temperature range.

ESTHD50VM

Carlo Gavazzi Holding Ag

Carlo Gavazzi's ESTHD50VM is a humidity sensor with 2% accuracy, 0-10V analog output, and -40 to 100°C operating range. Ideal for duct mounting applications in various industries due to its PC-110 body material and voltage supply of 8-35V.

TMCS1108A1UQDRQ1

Texas Instruments

TMCS1108A1UQDRQ1 by Texas Instruments is a current sensor with 3-5V supply, AEC-Q100 screening, and -40 to 125°C operating temp. Ideal for automotive applications due to its surface mount package and analog voltage output.

ACS723KMATR-20AB-T

Allegro MicroSystems

ACS723KMATR-20AB-T by Allegro MicroSystems is a current sensor with 2% accuracy, outputting analog voltage in the range of 0.5-4.5V. It operates b/w -40 to 125°C and has a supply voltage range of 4.5-5.5V, making it suitable for various industrial applications requiring precise current measurements.

IS31SE5104-QFLS2-TR

Integrated Silicon Solution

IS31SE5104-QFLS2-TR by Integrated Silicon Solution is a touch sensor with 16 terminals. It has a max supply voltage of 5.5V and operates in temperatures ranging from -40 to 85°C. This surface mount sensor is commonly used for various applications requiring touch sensing capabilities.

MTCH102-I/MS

Microchip Technology

SENSOR CONTROLLERS; Terminal Finish: MATTE TIN;

BMA253

Robert Bosch

BMA253 by Robert Bosch is an accelerometer sensor with a supply voltage range of 1.62V to 3.6V and digital output voltage ranging from 0.48V to 1.92V. With a compact square body measuring 2mm in length and width, it is ideal for applications requiring precise motion detection in tight spaces at temperatures b/w -40°C to 85°C.

ACS722LLCTR-20AU-T

Allegro MicroSystems

CURRENT SENSOR; Terminal Finish: MATTE TIN;

TMCS1108A3UQDRQ1

Texas Instruments

TMCS1108A3UQDRQ1 by Texas Instruments is a current sensor with 8 terminals, operating voltage range of 3-5V, and AEC-Q100 screening. It measures current output as analog voltage in temperatures from -40 to 125°C. Ideal for automotive applications due to its surface mount package and high temperature tolerance.

ACS770ECB-200U-PFF-T

Allegro MicroSystems

Allegro MicroSystems' ACS770ECB-200U-PFF-T is a current sensor with 5V power supply, AEC-Q100 screening, and 85°C max operating temp. Ideal for automotive applications due to its BICMOS technology, through-hole mounting feature, and single-ended output circuit type.

TMCS1101A4UQDR

Texas Instruments

TMCS1101A4UQDR by Texas Instruments is a current sensor with 8 terminals. It operates b/w -40°C to 125°C, providing analog voltage output. With a supply voltage range of 3V to 5.5V, it is ideal for surface mount applications in various industries.