Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

SNDH-H3C-G04

Manufacturer

Honeywell Sensing And Control
Manufacturer's Part Number

SNDH-H3C-G04
Description

SPEED SENSOR; Termination Type: CONNECTOR; Maximum Operating Current: 14 mA; Maximum Output Current: 20 A; Housing: PLASTIC;
Datasheet

Datasheet

Not In Stock

Popular Products

CRG0805F10K

TE Connectivity

TE Connectivity's CRG0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in various electronic circuits due to its compact size and high temperature rating.

Details

KSZ9031RNXIA

Microchip Technology

KSZ9031RNXIA by Microchip is a 48-terminal Ethernet transceiver with data rate of 1000 Mbps. Operating temperature range from -40 to 85°C makes it suitable for industrial applications. This square-shaped chip carrier has a very thin profile and matte tin finish, ideal for network interfaces.

Details

SMBJ18CA

Thinking Electronic Industrial

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

NDT2955

Fairchild Semiconductor

P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; Package Style (Meter): SMALL OUTLINE; Maximum Drain Current (Abs) (ID): 2.5 A;

Details

STM32F103C8T6

STMicroelectronics

STM32F103C8T6 by STMicroelectronics is a 32-bit microcontroller with 48 terminals, operating at up to 16 MHz. It features 10-Ch 12-Bit ADC channels and 7 DMA channels, suitable for industrial applications requiring low power consumption and high-speed connectivity via CAN, I2C(2), SPI(2), USART(3), USB.

Details

ULN2803A

Sanken Electric

NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; JESD-30 Code: R-PDIP-T18; Package Body Material: PLASTIC/EPOXY;

Details

LM555CMX

Texas Instruments

LM555CMX by Texas Instruments is an Analog Waveform Generation IC with 8 terminals. It operates at a nominal voltage of 5V and supports power supplies ranging from 5V to 15V. This versatile IC, housed in a small outline package, is commonly used for pulse and rectangular waveform generation in commercial temperature environments.

Details

1N4148

Sangdest Microelectronics (Nanjing)

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

ERJ3EKF1002V

Panasonic

Panasonic's ERJ3EKF1002V is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.

Details

1N4148WS

Diotec Semiconductor Ag

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BSS138DW-7-F

Diodes Incorporated

BSS138DW-7-F by Diodes Incorporated is a N-channel small signal FET with a min DS breakdown voltage of 50V. It is used for switching applications and operates in enhancement mode. This surface mount transistor has a max drain current of 0.2A and a max power dissipation of 0.2W.

Details

MBRA160T3G

Onsemi

MBRA160T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.51V. It operates b/w -55 to 150°C, has a reverse test voltage of 60V, and is ideal for power applications due to its high efficiency and small outline package style.

Details

1N4148

General Diode

RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Terminal Finish: Tin/Lead (Sn/Pb); No. of Elements: 1;

Details

DS18B20U

Maxim Integrated

DS18B20U by Maxim Integrated is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.

Details

ATMEGA328P-AU

Microchip Technology

ATMEGA328P-AU by Microchip: 8-bit RISC CPU, 20 MHz clock, 23 I/O lines. Ideal for industrial applications with SPI, TWI, USART connectivity and low power mode. Features include 2048 RAM bytes, 1024 EEPROM size, and 16384 ROM words.

Details

1N4148WS

Changzhou Starsea Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

CR0805-FX-10R0ELF

Bourns

Bourns CR0805-FX-10R0ELF is a SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for applications requiring a temperature range of -55 to 155 °C, such as automotive electronics and industrial control systems.

Details

BAV99

Daco Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LL4148

Fairchild Semiconductor

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

06035C103KAT2A

KYOCERA AVX

06035C103KAT2A by KYOCERA AVX is a SMT ceramic capacitor with 0.01uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for applications requiring compact surface mount capacitors with stable performance in a wide temperature range.

Details

SNDH-H3C-G04 Technical Details

TYPE	DESCRIPTION
Sensors or Transducers Type:	SPEED SENSOR
Maximum Operating Current:	14 mA
Termination Type:	CONNECTOR
Maximum Output Current:	20 A
Housing:	PLASTIC

Category Top Products

SNDH-H3P-G01

Honeywell Sensing And Control

SPEED SENSOR; Housing: PLASTIC; Termination Type: CONNECTOR; Maximum Output Current: 20 A; Maximum Operating Current: 14 mA;

SCHA63T-K03-6

Murata Manufacturing

Murata's SCHA63T-K03-6 is a MEMS accelerometer/gyroscope with 32 terminals, operating b/w -40°C to 110°C. It offers digital voltage output at 3-3.6V supply voltage range. This rectangular sensor in plastic/epoxy package is ideal for surface mount applications.

MLX90615SSG-DAG-000-TU

Melexis N V

MLX90615SSG-DAG-000-TU by Melexis N V is a SENSOR MODULE with 4 terminals, operating at -20 to 85°C. It has a digital voltage output and open-drain configuration. This metal package sensor is ideal for automotive applications requiring precise temperature measurements.

ACS733KLATR-65AB-T

Allegro MicroSystems

ACS733KLATR-65AB-T by Allegro MicroSystems is a current sensor with 16 terminals, operating at -40 to 125°C. It provides an analog voltage output and has a supply voltage range of 3.14V to 3.46V. This rectangular surface-mount sensor is ideal for automotive applications due to its AEC-Q100 screening level.

LM94022QBIMGX/NOPB

National Semiconductor

Other Sensors/Transducers; Mounting Feature: SURFACE MOUNT; No. of Terminals: 5; Package Shape or Style: RECTANGULAR; Maximum Operating Current: .009 mA; Technology: CMOS;

3.000.521

Sensirion Ag

GAS SENSOR;

TMCS1107A4BQDR

Texas Instruments

TMCS1107A4BQDR by Texas Instruments is a current sensor with 8 terminals. It operates b/w -40°C to 85°C, producing analog voltage output. With a supply voltage range of 3V to 5.5V, it is ideal for surface mount applications in various industries.

QT60168-ASG

Microchip Technology

Microchip Technology's QT60168-ASG is a capacitive touch sensor with 32 terminals. It operates b/w -40 to 105°C, outputting digital voltage ranging from 0.60-4.30V. This square-shaped sensor, made of plastic/epoxy, is ideal for surface mount applications in various industries.

SCL3300-D01-10

Murata Manufacturing

ACCELEROMETER;

HTB50-TP

Lem International Sa

HTB50-TP by Lem International Sa is a CURRENT SENSOR with 4 terminals, outputting -4-4V analog voltage. It operates b/w -40 to 80 °C and has a resistance of 100 ohm. Ideal for applications requiring precise current measurement in industrial settings.

ACS722LLCTR-40AU-T

Allegro MicroSystems

CURRENT SENSOR; Terminal Finish: MATTE TIN;

TMCS1100A3QDRQ1

Texas Instruments

TMCS1100A3QDRQ1 by Texas Instruments is a current sensor with 8 terminals, operating voltage range of 3-5.5V, and output in analog voltage. AEC-Q100 screening makes it suitable for automotive applications where precise current measurement is required in harsh environments. With a compact rectangular package design, it can be easily surface mounted in tight spaces.

TMCS1107A3UQDT

Texas Instruments

TMCS1107A3UQDT by Texas Instruments is a current sensor with 8 terminals. It operates b/w -40 to 85°C, providing analog voltage output. With a supply voltage range of 3-5.5V, it is ideal for surface mount applications in various industries.

HIH-4602-L

Honeywell Sensing And Control

HUMIDITY SENSOR;

FX292X-040B-0025-L

TE Connectivity

TE Connectivity's FX292X-040B-0025-L is a force sensor with 1-5V supply voltage range, analog output, and round package shape. Ideal for applications requiring precise force measurement in temperatures ranging from 0 to 50°C.

SHT41-AD1B-R3

Sensirion Ag

Sensirion Ag's SHT41-AD1B-R3 is a humidity and temperature sensor with 4 terminals. It operates b/w -40 to 125°C, outputting digital voltage at a supply voltage range of 1.08V to 3.6V. This square-shaped sensor in plastic/epoxy package is ideal for surface mount applications.

CSLA1CD

Honeywell Sensing And Control

CURRENT SENSOR;

IVT-S-500-U3-I-CAN2-12/24

Isabellenhuette Heusler & Kg

CURRENT SENSOR;

KX134-1211

ROHM

ROHM's KX134-1211 is a 12-terminal accelerometer with a supply voltage range of 1.7V to 3.6V, outputting digital voltage from 0.40-1.60V. This silicon micromachine sensor operates b/w -40°C to 105°C, making it ideal for applications requiring precise digital acceleration measurements in compact spaces.

NJR4266F3D1

NISSHINBO MICRO DEVICES INC

Other Sensors/Transducers;